The US aluminum industry is placing renewed emphasis on workforce safety, domestic production, and material recovery, with the Aluminum Association’s sold-out Casthouse Safety Workshop in Charlotte, North Carolina, highlighting the importance of safe molten aluminum handling. The program trained more than 120 industry workers and has been running for over 30 years, with the Association describing it as a global benchmark for casthouse operators and supervisors. The workshop comes as the industry continues to focus on strengthening domestic manufacturing capabilities and supply chains. Alongside workforce training, the Aluminum Association has called for bipartisan permitting reform to accelerate investment in US aluminum production, arguing that faster approvals could help unlock the...
Canada is looking to expand its domestic aluminium processing capacity as the government seeks to reduce the sector’s dependence on the United States. Industry Minister Mélanie Joly has described more than USD 193 million in federal funding for projects at five industrial sites in Quebec as a first step towards strengthening the country’s aluminium supply chain and building the capacity to process more metal at home. The funding, announced in La Baie, Quebec, covers projects at four Rio Tinto facilities in the Saguenay-Lac-Saint-Jean region and the Alouette aluminium smelter in Sept-Îles. Joly, who also serves as the minister responsible for economic development in Quebec, said the investment reflects the strategic importance of aluminium to Canada’s economy and national sovereignty. The...
Grow with
AL Circle
Global aluminium extrusion demand is entering a phase with consumption projected to rise from 35.25 million tonnes in 2025 to 35.93 million tonnes in 2026 and 44.22 million tonnes by 2035, representing a 2.29 per cent CAGR. While building and construction will remain the largest end-use sector and China will continue to dominate the global market, the next decade is expected to bring stronger momentum from transportation, electrical and electronics, industrial applications and emerging markets across Asia. China accounted for 64 per cent of global aluminium extrusion usage in 2025, while the Rest of Asia Pacific (ROAP) represented 10 per cent, North America 8 per cent, Europe 10 per cent, the Middle East and Africa 5 per cent and South America 3 per cent. At the same time, the global...
The government has declined provisional protection against surging aluminium extrusion imports, leaving local producers waiting for the outcome of a wider safeguard investigation. New Zealand's aluminium extrusion industry faces several more weeks of uncertainty after the government decided not to impose an emergency provisional duty on imports, even as local producers warn that a sharp increase in low-cost material is already affecting operations. Commerce and Consumer Affairs Minister Cameron Brewer made the decision after receiving advice on whether provisional duties should be introduced. The move does not end the trade-remedy process, however, with the Ministry of Business, Innovation and Employment (MBIE) expected to report on its broader aluminium extrusion safeguard investigation...
DriveSys Systems Private Limited has acquired additional land in Maharashtra to expand its aluminium project. The company is a wholly owned subsidiary of ZF Steering Gear. The company has acquired Plot No. E-10, covering around 25,882 sqm, at Supa Parner Industrial Park in Ahilyanagar district. The land acquisition follows a communication from the Maharashtra Industrial Development Corporation (MIDC) dated September 2, 2026. On September 3, ZF Steering Gear revealed the transaction under the SEBI Listing Obligations and Disclosure Requirements Regulations, 2015. To know the global production, demand and consumption forecasts of aluminium extrusions, explore our report " The World of Aluminium Extrusions to 2035 " The newly acquired plot is located next to DriveSys’ existing project site....
ALENZ is calling for provisional trade protection as rising low-cost aluminium extrusion imports put pressure on domestic producers during an ongoing safeguard investigation. New Zealand's aluminium extrusion industry is urging the government to introduce temporary trade protection as imports surge 38 per cent year-on-year, putting pressure on local manufacturers while a safeguard investigation is underway. The Aluminium Extruders Association of New Zealand (ALENZ) asked the Ministry of Business, Innovation and Employment (MBIE) in January to investigate whether safeguard measures should be applied under the Trade (Safeguard Measures) Act. MBIE began an 85-day investigation in May, after the government accepted the need to examine the industry's concerns. ALENZ is now calling for a...
PT Alamtri Resources Indonesia Tbk (ADRO), the Jakarta-listed natural resources company, is entering a new stage of growth as its aluminium smelting investments begin to take shape alongside stronger margins from its metallurgical coal business. The outlook has strengthened Sucor Sekuritas' view of the company, with the brokerage retaining its bullish rating and a target price of IDR 3,800 (USD 0.24) per share. Analysts see Alamtri as an attractive value opportunity, citing its high-margin mining operations, sizeable internal cash reserves and potential for rapid revenue growth over the medium term. Alamtri's growing presence in green metal refining is also drawing attention from international investors watching Southeast Asia's transition economy. The company's strategy provides an...
The European Union’s aluminium extrusion trade is moving in two distinct, although equally subdued, directions. Exports have remained broadly resilient despite repeated fluctuations, while imports have been declining consistently since reaching a peak in 2022, according to International Trade Administration data. As far as exports are concerned, the volumes have been fluctuating over the years now. After declining for the two consecutive years by total 10.14 per cent from 345,241.74 tonnes to 310,217.09 tonnes in 2020, the exports rose strikingly in the subsequent year and regained higher volume than in 2018 level, coming in at 356,523.94 tonnes in 2021. However, the recovery did not last beyond two years and eventually plunged to as low as 319,840 tonnes as of 2023. They subsequently...
At the US-Canada border, aluminium is constantly on the move, but the direction of trade is far from balanced. In the first six months of 2026, the US imported 907,581.44 tonnes of primary aluminium from Canada, while exporting only 78,886.12 tonnes of semi-fabricated aluminium products such as sheets, plates, foils, extruded profiles, tubes and wire to Canada. US therefore imported about 11.5 times more primary aluminium from Canada than it exported in semi-fabricated form. That raises a question for the aluminium industry. If such large volumes of Canadian primary metal are entering the US, and the country has a sizeable downstream processing base, why is so little semi-finished aluminium travelling back to Canada? The answer lies in the different roles the two countries have developed...
Fenesta has commissioned a new aluminium extrusion plant in Kota, Rajasthan, expanding its presence in the aluminium value chain and creating a new business vertical serving external customers. The Gurugram-based windows and doors business of DCMShriram Ltd said the facility will initially support its internal extrusion requirements, giving the company greater control over production and reducing its reliance on external suppliers. The plant will also supply aluminium extrusions to original equipment manufacturers (OEMs) and other users, allowing Fenesta to participate directly in the wider extrusion market. To know the global production, demand and consumption forecasts of aluminium extrusions, explore our report "The World of Aluminium Extrusions to 2035" Bringing extrusion in-house The...
Sanket Deora takes over as Chief Financial Officer following the resignation of Shashank Shekhar Chaturvedi, effective September 3, 2026. Sampat Aluminium has appointed Sanket Sanjay Deora as its new Chief Financial Officer and Key Managerial Personnel, marking a change in the aluminium manufacturer's finance leadership. The company's Board of Directors approved the appointment at a meeting on September 3, 2026, following the resignation of outgoing CFO Shashank Shekhar Chaturvedi. Chaturvedi stepped down citing pre-occupation and other personal commitments. The company said he confirmed that there were no other material reasons for his resignation and that all dues payable to him had been cleared. To know the global production, demand and consumption forecasts of aluminium extrusions,...
Thailand has opened a new anti-dumping exporter review covering Chinese aluminium extrusions, with a provisional 21.94 per cent cash deposit rate set for the applicant. Thailand's Department of Foreign Trade has initiated a new exporter review covering aluminium extrusions from China, adding another layer of scrutiny to imports that are already subject to definitive anti-dumping duties. The review follows an application from Chinese producer Guangdong Shengyu Xingda Aluminum Profile Co., Ltd. As part of the proceeding, Thai authorities established a provisional anti-dumping cash deposit rate of 21.94 per cent, calculated on a cost, insurance and freight (CIF) basis. The provisional rate will apply for up to one year or until the review is concluded, whichever comes first. To know the...
Canada imported 195,000 tonnes of aluminium plates, sheets and strip in the first half of 2026, down from 214,000 tonnes during the same period of 2025. Total imports were therefore lower by 8.9 per cent year-on-year, although the second quarter saw a stronger volume of shipments than the first. Imports stood at 82,000 tonnes in Q1 2026 and rose to 113,000 tonnes in Q2, an increase of 37.8 per cent quarter-on-quarter. Canada had imported 98,000 tonnes in the first quarter and 116,000 tonnes in the second quarter in the same period last year. China is the largest supplier among the countries listed. Exports to Canada reached 64,000 tonnes in H1 2026, compared with 42,000 tonnes in H1 2025. This was an increase of 52.4 per cent. The quarterly data also shows that growth accelerated sharply...
PV aluminium extrusion: The PV aluminium frame sector operated steadily overall this week. Sample enterprises maintained stable operating rates, and industry leaders kept capacity at relatively high utilisation levels. Among them, a frame enterprise in the Hebei region reported that it will maintain full production in September. From the downstream supporting side, PV module prices have continued to rise recently, squeezing profit margins for end-user projects and dragging down downstream purchasing and stockpiling willingness. According to an SMM survey, domestic module enterprises' scheduled production in September is expected to pull back by approximately 1.7 GW M-o-M from August. End-user module output is weakening marginally, and the pullback in downstream module scheduled production...
Canadian Prime Minister Mark Carney has indicated Ottawa’s readiness to resume Canada-US trade talks and reach a deal with President Donald Trump, as the tariff debate continues to pressure deeply integrated supply chains. Tariff uncertainty could also pressure aluminium trade, costs, aluminium extrusion and downstream industries on both sides of the border, reiterating the essentiality of a stable Canada-US trade framework. Speaking in Thunder Bay, Ontario, on Thursday, Carney stated that Canada was prepared to negotiate when the US was ready, while stressing that any agreement must offer stability and credibility. To know the aluminium casting demand forecast in the transportation sector, explore our report “Global Aluminium Casting Market 2026-2032: Plant Economics, Alloy Segmentation,...
Germany and Italy have long been closely linked in Europe’s aluminium extrusion trade. Italy remains a significant source of extruded aluminium for the German market, but the flow has changed considerably over the past few years. The latest numbers raise an interesting question: is Germany simply buying fewer Italian extrusions, or is the country’s demand for the product itself going through a broader transformation? German aluminium extrusion imports from Italy stood at 43,496.98 tonnes in January-May (YTD) 2022. By YTD 2023, that had fallen to 35,197.76 tonnes, down 19.08 per cent year on year. Imports declined again in YTD 2024 to 30,420.46 tonnes, a further 13.57 per cent decrease. Then the fall appeared to pause. Imports in YTD 2025 were almost unchanged at 30,397.72 tonnes,...
India-based Lumino Industries made its BSE debut at INR 109 (USD 1.15) per share, 32.93 per cent above its issue price. The stock later touched a high of INR 113.65 (USD 1.2) and a low of INR 106.48 (USD 1.13), with more than 7 million shares traded on the exchange. Lumino Industries operates in the power transmission and distribution sector. It manufactures aluminium conductors, power cables and electrical wires, including HTLS conductors. It also undertakes EPC work in power transmission and distribution, EHV substations, re-conductoring, railway electrification, solar power and water management. The company’s IPO was subscribed 117.78 times. Bidding opened on August 27 and closed on August 31, 2026, with a price band of INR 78-82 (USD 0.83-0.87) per share. The INR 7 billion (USD 74...
What does the building and construction market mean for aluminium extrusion industry? The answer may depend less on how much the world builds and more on where it builds and what those buildings require. As construction activity picks up across regions, aluminium extrusion is set to follow - but with the strongest opportunities emerging in different ways across markets. The global construction market was valued at about USD 11.4 trillion in 2024 and is estimated at USD 12.1 trillion in 2025. It is forecast to expand to around USD 16–17 trillion by 2030, representing a 5-6 per cent CAGR over the next five years, according to various industry sources. This expansion matters for aluminium extrusion because building and construction is already the largest end-use sector for extruded...
DCM Shriram Limited has commissioned its Main Aluminium Extrusion Plant at its Kota Unit on September 1, 2026, marking a key step in the company's expansion into aluminium extrusion and surface finishing. The company said the extrusion plant became operational at 10:30 AM. following the Board of Directors' earlier approval for the establishment of an Aluminium Extrusion and Surface Finish plant. This marks the completion of Phase 1 of DCM Shriram's building materials expansion strategy. The accompanying surface finish plants remain under installation and are scheduled to be launched in phases. The project involves an investment of INR 1.5 billion (USD 15.7 million) for establishing the plant at DCM Shriram’s Kota Unit. To know the global production, demand and consumption forecasts of...
In the trade of aluminium semi-fabricated products such as sheets, plates, foils, extruded profiles, tubes, and wire, the import volume of the US in the January-March or first quarter of 2026 marks a significant year-on-year rise, driven by strong demand and limited domestic smelting capacity. According to the data recorded by the United States Geological Survey (USGS), as of Q1 2026, the volume of US imports of semi-fabricated aluminium products amounted to 423,000 tonnes . This marked a drastic year-on-year surge of 30.56 per cent , as the figures jumped from 324,000 tonnes imported in Q1 2025. To know the global production, demand and consumption forecasts of aluminium extrusions, explore our report “The World of Aluminium Extrusions to 2035” The month-on-month growth chart Comparing...
