China exported 208,000 tonnes of aluminium flat-rolled products (FRP) to the United States in the first half of 2026, compared with 55,000 tonnes in the same period last year. This was an increase of 278.2 per cent, with plates, sheets and strip accounting for most of the growth. Exports of plates, sheets and strip (HS 7606) reached 184,000 tonnes in H1 2026, up from 33,000 tonnes a year earlier, an increase of 457.6 per cent. Shipments rose from 86,000 tonnes in Q1 to 98,000 tonnes in Q2, up 14 per cent. Compared with the 13,000 tonnes exported in Q2 2025, the latest figure was 653.8 per cent higher. To know the global production, demand and consumption forecasts of aluminium extrusions, explore our report " The World of Aluminium Extrusions to 2035 " In 2025, exports of plates, sheets...
Kaiser Aluminum is seeing stronger demand across aerospace, defence, packaging and semiconductor-related markets, with customer bookings extending into 2027. However, the aluminium producer’s latest results highlight a challenge: converting rising shipments and record conversion revenue into stronger profitability as planned outages, lower scrap utilisation and startup costs weigh on margins. The company reported third-quarter 2026 shipments of 300 million pounds, up from 270 million pounds in the same period last year, while conversion revenue climbed 25 per cent year-on-year to a record USD 439 million from USD 351 million. Net sales reached USD 1.21 billion. Despite the growth, adjusted EBITDA increased by only USD 3 million year-on-year to USD 84 million. A USD 29 million unfavourable...
Grow with
AL Circle
Texarkana Aluminum has rolled its first coil following the commissioning of a major hot mill expansion project at its Texas facility, featuring a new four-stand hot tandem mill supplied by Mino. The project began in 2023 after Mino received a contract to design, supply, and commission the mill. The new equipment was installed as an extension to the existing single-stand reversing hot mill, converting the plant into a “1+4 Hot Rolling Line”. In this setup, the older mill acts as the roughing stand, while the four new stands are used for hot finishing. To know the long-term bauxite market forecast, book our report: “ Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade Flows & Price Outlook ” The company said the new configuration is intended to improve production rates...
Shyam Metalics and Energy Limited reported higher revenue and profit for the fourth quarter ended March 31, 2026, supported by stronger volumes and better realisations across aluminium foil businesses, carbon steel, stainless steel, and speciality alloys The company recorded a 22 per cent rise in sales volumes during the quarter, while profit after tax increased 42 per cent year-on-year to INR 3.12 billion (USD 32.7 million), supported by stronger demand and operational performance across key segments. To know the long-term bauxite market forecast, book our report: “ Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade Flows & Price Outlook ” Revenue for Q4 FY26 rose 27 per cent year-on-year to INR 52.40 billion (USD 550 million), while EBITDA increased 33 per cent to...
The proposal for the relocation of the registered office within the same city of New Delhi has been approved by Golkonda Aluminium Extrusions Limited after the company’s board meeting on May 9, 2026. The meeting started at 2:00 PM and ended at 2:30 PM. During the board meeting, the plan was passed under Regulation 30 of the SEBI (Listing Obligations and Disclosure Requirements) Regulations, 2015. The new registered office address of the company will be changed from A-2/78-B, Keshav Puram, New Delhi – 110035, to 1003, 10th Floor, Vikram Tower, Rajendra Place, New Delhi – 110008. The new address will become effective from May 9, 2026. It is important to note that the change of address has been made within the geographic boundary of the city itself. Also Read: Golkonda Aluminium files Q4FY26...
The global aluminium industry is going through a significant transformation as rising geopolitical tensions, changing trade policies, strategic investments, and impressive quarterly earnings are all influencing market sentiment around the world. With aluminium prices skyrocketing and companies reporting record financial results, the sector is also facing challenges like supply chain disruptions, anti-subsidy investigations, and plans for downstream expansion. This dynamic environment is creating a landscape where volatility and opportunity coexist, suggesting deeper changes across the global value chain. Due to the increasing geopolitical tensions in the Middle East, aluminium prices are showing a rising trend and have sent shares of Malaysia's integrated producer Press Metal Aluminium...
Manaksia Aluminium closed FY26 with stronger profitability and higher operating cash flow, supported by growth in revenue and a rise in total equity, while the company also announced a final dividend recommendation and addressed an ongoing GST dispute. The company reported audited standalone financial results for the quarter and year ended 31st March, 2026, following a Board meeting held on 7th May, 2026. Net profit after tax for FY26 increased by 25 per cent to INR 75.56 million from INR 60.46 million in FY25. Revenue crosses ₹5.6 billion as cash flow improves sharply Revenue from operations for FY26 rose 10.8 per cent to INR 5.64 billion from INR 5.09 billion in the previous financial year, while other income declined 18.9 per cent to INR 8.25 million in FY 26, against INR 10.17 million...
Edna has been selected by a Kazakhstan's manufacturing company for setting up a new aluminium facility, as announced on Monday by the city officials. The project includes a total investment of USD 15 million. The announcement was made on May 4 at the 2026 SelectUSA Investment Summit held in Washington, D.C., as per the statement released by the City of Edna. City Manager Gary Boz and Victoria Economic Development Corp. Regional Partnership President Jonas Titus, who have been reported to attend the event. Also read: Indian auto acceleration attracts global suppliers; aluminium supply takes centre stage Boz, in a statement, stated, "Bauner selected Edna for its strong community character and pro-business environment. This is a truly great day for our city" As per the plan, the new...
The partnership between Safetylyne, an engineering industry-leading height access systems and roof safety solutions provider and Capral, the leading provider of aluminium products and solutions across Australia, has been for 25 years. In this partnership, both firms create custom aluminium height safety and roof access systems for projects all over Australia. This long-standing partnership has played a crucial role in Safetylyne's growth into a national leader in engineered access solutions for commercial, industrial and complex infrastructure settings. Since its inception, tracing back to 2000, Safetylyne has kept building its reputation by overcoming challenges that standard systems are unable to handle. In the current situation, the firm designs, fabricates and installs comprehensive...
Press Metal Aluminium Holdings Bhd may see further upside despite a strong rally in its share price, according to RHB Research. The research firm expects the company’s earnings to reach record highs in 2026 and 2027, supported by firm aluminium prices and a continued gap between supply and demand. It has raised its target price for the stock to RM10.50 (USD 2.65), the highest among major brokerages, while maintaining a “buy” rating. To know the long-term bauxite market forecast, book our report: “ Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade Flows & Price Outlook ” Shares of Press Metal have risen about 24 per cent so far this year, driven by global supply concerns and geopolitical tensions in the Middle East. Disruptions, including constraints around the Strait...
JKL Investment has fully exited its investment in Sama Aluminium, recovering around KRW 70 billion (USD 47.4 million) and more than doubling its initial investment. In January 2023, the firm invested about KRW 32.1 billion (USD 21.8 million) in the company. It did this through equity and convertible bonds under its ESG Future Mobility Value Chain fund. The deal included more than 700,000 shares and bonds worth KRW 10 billion (USD 6.77 million). It was meant to support growth in electric vehicles and secondary battery materials. To know the long-term bauxite market forecast, book our report: “ Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade Flows & Price Outlook ” JKL started selling part of its stake after the lock-up period ended, offloading some shares between...
All the share capital of Republic Wire, Inc., a manufacturer of aluminium and copper wire with headquarters in Cincinnati, Ohio, has been acquired by Nexans, a global leader in electrification, driving the energy transition with innovative solutions that power a safer, sustainable, and connected future. Republic Wire, Inc., founded in 1982 and family-owned, have emerged as a leading manufacturer of low-voltage wiring products, catering to electrical wholesale distributors, utilities, and municipalities throughout the US and Canada. In the year that ended in February 2026, the firm made a total revenue of USD 5,617.3 million. Additionally, the firm attained a fully operational industrial platform, which included a 32,500 square metre manufacturing facility and is heavily automated....
Researchers at the Seoul National University have created a carbon fibre that is low in weight with surprisingly high strength, opening new possibilities for drones, robotics and aerospace. Instead of combining materials layer by layer, scientists have created a way to create a continuous carbon fibre piece arranged in a three dimensional lattice design. The method, called “3D node winding,” avoids many of the weak points normally found in composite structures. Traditional carbon fibre composites are already known for being strong and lightweight, but they are usually made by stacking sheets or assembling components. That process can create internal boundaries where stress builds up or load transfer becomes less efficient. Even many 3D-printed composite systems still depend on layered...
Kaiser Aluminum Corporation has seen insider selling, worth about USD 2.6 million at an average price of around USD 174. An independent director Brett Wilcox has sold his shares. To know the long-term bauxite market forecast, book our report: “ Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade Flows & Price Outlook ” The transaction is significant as it accounted for roughly 56 per cent of his total holding. It is also the largest insider sale in the company over the past year. The sale took place close to the current market price, which suggests a sharp price peak did not drive it, but it still signals caution for investors. Over the past year, there have been no recorded insider purchases in the company. The lack of buying, along with recent selling, may suggest...
Leading company in the Austrian aluminium industry, AMAG Austria Metall AG, posted its financial results for the January-March quarter (Q1) 2026, displaying a modest revenue increase but robust gains, driven by favourable pricing dynamics. The lowered raw material or alumina cost and a continued upward trend in aluminium prices, both in the London Metal Exchange (LME) and the US Midwest premiums , helped the company navigate through the trade disruptions caused by the Middle East conflict. AMAG CEO Dr Helmut Kaufmann noted, "The very good earnings in the first quarter of 2026 underline the stability of our business model and the high performance of our organisation. AMAG has thus once again proven itself to be a reliable company, even in a challenging and volatile environment." Explore-...
Manaksia Aluminium Company Limited, in the third quarter (Q3) of the financial year of 2025-26, is witnessing a gradual shift in the market trend, as improving technical indicators are offsetting a mixed financial performance. While near-term financial figures seem to bring about a pause in market momentum, longer-term growth metrics and recent stock market momentum are shaping a more solidified outlook among investors. Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across the value chain Flat financial performance, but long-term growth potential Manaksia Aluminium’s Q3 FY25-26 performance remained largely flat, indicating a temporary slowdown after a period of expansion. However, the broader trajectory remains encouraging, with...
Constellium started 2026 with stronger earnings and improved margins, posting what the company described as its best quarterly Segment Adjusted EBITDA performance to date. Revenue for the first quarter came in at USD 2.5 billion, up 24 per cent from the same period last year, while net income rose sharply to USD 196 million, compared with USD 38 million a year earlier. Shipments were slightly lower at 370,000 tonnes, down 1 per cent year-on-year. Adjusted EBITDA reached USD 359 million, although that figure included a positive non-cash metal price lag impact worth USD 97 million. Also read: Ardagh Metal Packaging Q1 revenue up 19% while EBITDA rise 15% Performance improved across the company’s operating divisions. The P&ARP segment delivered quarterly adjusted EBITDA of USD 151 million,...
JPMorgan Chase & Co has downgraded Kaiser Aluminum Corporation to Underweight from Neutral, citing valuation concerns despite strong recent performance. The brokerage raised its price target to USD 142 from USD 124, even as the stock trades significantly higher at around USD 172.52. Shares have surged 175 per cent over the past year and 93 per cent in the last six months, prompting concerns that much of the upside is already priced in. Also read: Fujian Minfa Aluminium reports $4.3M FY2025 loss as revenue declines and earnings reverse Analyst Bill Peterson noted that the stock is trading above historical levels and beyond the firm’s valuation benchmark, indicating potential overvaluation. The company gained from strong demand in end-markets and wider margins. These came from key...
The Government of India, through its Directorate General of Trade Remedies (DGTR) under the Ministry of Commerce, has launched an anti-subsidy investigation on aluminium wire products from Malaysia. The concern for a probe was raised by the leading Indian aluminium manufacturers, such as Vedanta Limited, Hindalco Industries Limited, and Bharat Aluminium Company Limited, urging for a review to finalise an extension to the duties for trade protections. On Monday, the government announced that the probe has been made in light of the existing countervailing duties (CVDs) on Malaysia’s exports of “Aluminium Wire/Wire Rods above 7 mm diameter” (HSN code: 760511) that are scheduled to lapse in September. Under World Trade Organisation rules, countries can levy such duties to protect domestic...
India’s aluminium tariff regime, especially now in 2026, has become a regulatory fault line between upstream smelters chasing security, downstream processors absorbing cost pressure, recyclers fighting for cheaper feedstock and the country is trying to balance it all to keep a lid on inflation while building a strategic industrial base. A tariff to protect, but not to simplify At the centre of the debate is India’s differentiated duty structure. Primary aluminium under HS 7601 is charged at 8.25 per cent, scrap under HS 7602 at 2.5 per cent, bars, rods, profiles, plates, sheets and strips at 7.5 per cent, foil at 7.5 per cent-10 per cent, and finished structures and articles at 10 per cent. That means that the duty structure has created a constant friction point, because preferential...
