ferret
Australis Engineering offers Series 50 aluminium profile belt conveyors
Edited by : AL CIRCLE
1 min read
Series 50 belt conveyors, now available from Australis Engineering , are purpose built for use with light to medium weight products, up to 30kg/m.
They feature a slimline body height of only 45mm, with head and idler rollers of 50mm, and can be used for horizontal conveying as shipped. With the addition of cleats to a standard belt, these conveyors can be easily adapted to become economical elevators.
Series 50 belt conveyors offer belt speeds that range from 2 m/s to 50m/s, with motors available as front or end drives with left or right mounts.
As they are fabricated from structural aluminium profile, and manufactured to order, they can be supplied in lengths of 350mm to 6000mm, and widths of 100mm to 600mm.
A selection of belt types is also available for Series 50 belt conveyors, including:
flat top (PVC, silicon or chemical resistant) rough top cleated belts food approved; and other special purpose belts on request.
They feature a slimline body height of only 45mm, with head and idler rollers of 50mm, and can be used for horizontal conveying as shipped. With the addition of cleats to a standard belt, these conveyors can be easily adapted to become economical elevators.
Series 50 belt conveyors offer belt speeds that range from 2 m/s to 50m/s, with motors available as front or end drives with left or right mounts.
As they are fabricated from structural aluminium profile, and manufactured to order, they can be supplied in lengths of 350mm to 6000mm, and widths of 100mm to 600mm.
A selection of belt types is also available for Series 50 belt conveyors, including:
flat top (PVC, silicon or chemical resistant) rough top cleated belts food approved; and other special purpose belts on request.
Previous article
Kaiser Aluminum Makes a Move: Up 3.3%
Next articleGKN composites featured in first flight of second X-47B
Grow with
AL Circle
