
India has initiated an anti-dumping (AD) investigation into aluminium imports from China, Malaysia, Vietnam and Thailand, bringing overseas supply and domestic manufacturing competitiveness under the lens. Launched by the Directorate General of Trade Remedies (DGTR) under Rule 5(4), the probe could have implications for around 228 Indian aluminium manufacturers, as nine domestic producers seek protection from allegedly cheaper imports. The development is expected to keep shares of Hindalco Industries, Bharat Aluminium, National Aluminium and Vedanta in focus during Thursday’s trading session. Aluminium demand in India spans several sectors. Power, packaging, transportation, construction, machinery and equipment are to name some. Ministry of Mines data show that the electricity sector...
Valeo unveils its aluminium Rear Door Cooling Module (RDHx) offering a 38 per cent boost in cooling capacity and a 65 per cent increase in power density compared to conventional copper equivalents. Valeo also exhibits its full range of liquid cooling solutions including Direct-to-Chip (DtC) Cold Plates, Cooling Distribution Units (CDUs) in rack manifolds and loop heat pipe innovations. At Data Centre World (Tech Show Paris) from November 18 to 19, 2026, visitors at Booth M100 (Hall 5, Paris Expo Porte de Versailles) will get their first hands-on look at Valeo’s new aluminium Rear Door Cooling Module, showcased alongside a complete lineup of thermal management solutions. As artificial intelligence (AI) workloads and high-performance computing (HPC) are pushing individual chip TDP (Thermal...
Grow with
AL Circle

Image credits: Waaree Energies Ltd Waaree Energies has started operations at a 3,000 MW per year solar module facility in Gujarat, marking the addition of capacity to its portfolio. The plant, located in Samakhiali in Kutch, has been set up through its subsidiary Sangam Solar One Private Limited. It runs on four lines of 750 MW each, together taking total output to the 3,000 MW mark. For the global aluminium value-chain 2026 outlook, book our exclusive report “Global ALuminium Industry Outlook 2026" The expansion fits into a larger plan. Back in March, the company cleared a capital expenditure of INR 39 billion (USD 468 million) to build a glass manufacturing unit with a capacity of 2,500 tonnes per day under Waaree Green Glass Private Limited. That move is aimed at tightening control...

The British Aerosol Manufacturers’ Association (BAMA) shares that the UK aerosol filling industry has had remained stable in 2025, with overall volumes dropping 2 per cent year-on-year. Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across the value chain Patrick Heskins, Chief Executive, BAMA, said that the decline reflects market cycles. “As wider market challenges persist, it is encouraging to see consumers consistently opting for the aerosol packaging format.” Also Read: https://www.alcircle.com/news/aluminium-beverage-can-sector-to-receive-a-boost-with-amps-bonn-laboratory-117989 Personal care remained the largest segment. Deodorants declined 5 per cent and antiperspirants fell 1.5 per cent. In contrast, shaving products rose 10...

Vedanta Aluminium Limited has implemented a watershed initiative named Sangam Project. Through this project, irrigation has been extended to more than 800 acres of land located in Kalahandi district, Odisha state, which would benefit almost more than 9,000 people in 41 villages. For the global aluminium value-chain 2026 outlook, book our exclusive report “Global ALuminium Industry Outlook 2026" The Sangam project will enhance agricultural efficiency through the rehabilitation or construction of 61 water resources. It has enabled the recharge of more than 11 lakh cubic metres of water, which has also increased the overall availability of groundwater. It would, in turn, enhance the security of the water supply to support farming and household use, and especially help those who have been...

In the current global downstream and recycled aluminium, every company is making crucial steps towards sustainability, circularity and better operational efficiency. With new regulations coming into play, smart investments being made and improvements in recycling and manufacturing practices, companies are stepping up to meet decarbonisation goals while also bolstering their supply chains and making the most of their resources. All these trends together are paving the way for a more organised and sustainability-focused future in the aluminium ecosystem. Ball Corporation, in its financial results for the year 2025 have represented impressive results in relation to maintaining and upholding sustainability. The firm has enhanced the use of renewable electricity by 84 per cent , representing a...

Glencore secured a 45 per cent stake in an aluminium recycling and remelting plant near Charleston, South Carolina, raising its position in the US aluminium market. The move is due to global supply chains facing pressure because of the conflict in the Middle East, which has affected availability and pushed up aluminium prices. The metal is widely used in sectors such as transport, construction, and packaging, making a stable supply important for the industry. For the global aluminium value-chain 2026 outlook, book our exclusive report “ Global ALuminium Industry Outlook 2026 " Glencore already holds a 30 per cent stake in Century Aluminum and had earlier provided funding for the Charleston-area facility in return for marketing rights. With this new investment, the company is increasing...

Over the past two weeks, the aluminium value chain has unfolded in fragments rather than a single, linear move. What starts as policy shifts and price pressure in bauxite moves through a well-supplied alumina market, before ending in a sudden supply shock in primary aluminium. Each layer is reacting to a different trigger-but together, they are reshaping the balance across the system. Bauxite: export controls, price signals and new capacity plans At the upstream end, supply discipline and expansion are moving side by side. Nigeria has stepped forward with plans to build a 1 million tonne alumina refinery, backed by USD 1.3 billion in financing, with expectations of producing 19 million tonnes over 20 years and contributing USD 1.2 billion annually to GDP. The full story is here . At the...

中文翻译附于新闻末尾,敬请继续阅读。 Canada’s economy has handled a year of US tariffs better than expected, but the impact has not been equal across sectors and regions, according to a report by Royal Bank of Canada (RBC). Industries such as steel, aluminium, copper, auto parts, softwood lumber, and some consumer goods have been the most affected. In 2025, steel product exports dropped by 30 per cent, hurting company revenues and hiring plans. Firms are cutting new hires, cutting overtime, and delaying training programs. Some are also shifting toward automation and changing how they run their operations. For the global aluminium value-chain 2026 outlook, book our exclusive report “ Global ALuminium Industry Outlook 2026 " According to RBC, supply chains between Canada and the US are closely linked. But...

Alcoa has pushed back against concerns over rising mercury emissions at its Wagerup alumina refinery in Western Australia, even as environmental groups move to challenge its operating licence. The refinery is located about 120 km south of Perth in the Jarrah forest region and it has come under scrutiny after recent data showed a steady increase in mercury emissions in recent years. Emissions reached around 400 kilograms in 2025, nearly double the levels which were recorded in 2022. The Conservation Council of Western Australia has formally opposed the state’s decision to approve a revised licence for the facility, arguing that the environmental and public health risks linked to the increase have not been fully addressed. CCWA executive director Matt Roberts said, “It seems Alcoa has seen...

Hind Aluminium Industries Limited has reported to the BSE that fluctuations in its share price are due to overall market trends rather than significant developments at the Company itself. For the global aluminium value-chain 2026 outlook, book our exclusive report “Global ALuminium Industry Outlook 2026" On April 8, 2026, the BSE asked a question about stock price volatility. On April 9, the Company responded that the fluctuations in stock prices were due to external forces in their markets. Hind Aluminium also confirmed compliance with Regulation 30 of the SEBI (Listing Obligations and Disclosure Requirements) Regulations, 2015, adding that all price-sensitive information has been disclosed in a timely manner. The company said that there is no material undisclosed information that could...

Did you know? Around 7 per cent of black dross is generated from the total volume of recycled aluminium worldwide, and Europe reflects a similar ratio of black dross generation at around 6.83 per cent. Aluminium dross occurs in two forms: black and white. White dross is generated mainly in primary aluminium smelters and during the melting of clean or pre-treated scrap in foundries. It forms when molten aluminium reacts with oxygen during smelting, refining, or casting, creating a residue with relatively high aluminium content. Black dross, by contrast, forms during recycling, particularly where mixed or contaminated scrap is melted. Coatings, oils, and other impurities increase oxidation and slag formation, producing a darker residue with lower aluminium content. On a global scale, dross...

Runaya Metsource, an Indian sustainable manufacturing company that specialises in resource recovery and green aluminium production, which is by Vedanta, on Thursday announced its achievement in developing green, spherical gas-atomised aluminium powder at its facility in Jharsuguda, Odisha. The project has been initiated in collaboration with Eckart, a firm that develops, produces and distributes metallic effects and pearlescent pigments in powder. Currently, the facility is deemed to produce aluminium powder with the focus of fostering a sustainable and integrated value chain. With this project, the firm aims to cut down on imports and then further boost different industrial sectors like aerospace, solar energy, catalysts and effect pigments. The first announcement Tracing back to January...

The London Metal Exchange (LME) aluminium prices continued to edge downwards on April 9. As cash prices and near-term contracts eased, the longer-dated contracts improved considerably. Stocks kept sliding down, indicating a continued high demand and supply pressure. Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across the value chain On April 9, LME aluminium cash bid price stood at USD 3494 per tonne, reflecting a 0.71 per cent decline from USD 3519 per tonne on April 8 . The cash offer price settled at USD 3494.5 per tonne, down 0.72 per cent from USD 3520 per tonne on the previous close. The LME aluminium 3-month bid as well as offer prices marked a decline of 0.23 per cent. The bid dropped from USD 3,463 per tonne on April 8 to USD...

A significant reduction in the shareholder payout has brought Xingfa Aluminium’s current position into sharper focus. The company lowered its annual dividend from HKD 0.64 to HKD 0.50 ( USD 0.082 to USD 0.064) after reporting a 23.5 per cent decline in 2025 profit, which fell to RMB 632 million ( USD 88 million). This reduction reflects a deeper operational strain driven by rising input costs, even as aluminium markets worldwide tighten. Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across the value chain Globally, the metal is entering a period defined less by cycles and more by constrained supply. Physical availability has thinned considerably, with London Metal Exchange (LME) inventories dropping to 418,675 tonnes as of March 27,...

Colombia-headquartered Tecnoglass Incorporated, manufacturer of architectural glass, windows and associated aluminium products, has revised its full-year 2026 profit outlook downward, citing the impact of newly implemented US tariffs on aluminium window imports. Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across the value chain Reduced from USD 259 million recorded over the last twelve months through Q4 2025, the extruded aluminium products manufacturer now expects its adjusted EBITDA to reach around 225 million to USD 245 million, with a midpoint of USD 235 million. Tariff impact drives earnings revision The updated guidance reflects a USD 50 million net impact compared to the company’s earlier forecast. The adjustment has come...

India is increasing its focus on renewable energy further, owing to the rising tensions in the Middle East, which create concerns about fuel supply. The country depends on imports for about 80 per cent of its oil and gas, now exposed to global risks. It also relies heavily on imports of key minerals required for clean energy technologies. India aims for 500 GW in renewables, including solar, wind, and hydro, by 2030. It is also scaling up battery storage and electric vehicles. The current climate goal of the nation aims for 60 per cent of power capacity from non-fossil sources by 2035, which will further increase demand for minerals. For the global aluminium value-chain 2026 outlook, book our exclusive report “ Global ALuminium Industry Outlook 2026 " While India produces some materials...

In FY2025-26, India hit its record wind power addition of 6.05 GW. This represents a 46 per cent increase compared to the previous year and exceeds the earlier peak recorded in FY2016-17. With this, the country’s total installed wind capacity reached over 56 GW. For the global aluminium value-chain 2026 outlook, book our exclusive report “ Global ALuminium Industry Outlook 2026 " India’s wind capacity growth aids its drive for non-fossil fuels. The 2030 goal is 500 GW, with wind joining solar and other renewables. The government is supporting the wind sector through several measures. It lowered customs duties on turbine parts and raw materials. It offered phased waivers on inter-state transmission charges (ISTS) until June 2028. There is a usage of competitive bidding for project...

India’s aluminium extrusion sector is seeing a steep slowdown, with production levels falling sharply due to ongoing disruptions linked to the West Asia crisis. Industry body Aluminium Extrusion Manufacturers Association of India said monthly output has nearly halved, dropping from around 100,000 tonnes to roughly 50,000-60,000 tonnes. On an annual basis, the sector had been operating at about 1.2-1.3 million tonnes, indicating a significant pullback in activity. According to ALEMAI Secretary Ankur Aggarwal, production cuts are directly linked to supply bottlenecks and fuel shortages. A large share of raw materials, close to 50 per cent, typically sourced from West Asia is currently stuck, as container unloading at ports in the region has come to a standstill, he said. For the global...

Shares of RITES Limited moved higher after the company received a revised contract from National Aluminium Company Limited, linked to coal mine infrastructure in Odisha. The stock rose 6.7 per cent to INR 213.90 (USD 2.31), up from the previous close of INR 200.41 (USD 2.17). Despite the jump, the stock remains down 4.6 per cent over the past year, with a current market capitalisation of around INR 98.65 billion. The updated contract relates to a railway siding project at Sankerjang, part of Phase I of NALCO’s Utkal-D coal mines. RITES is providing detailed engineering and project management consultancy (PMC) services under a deposit work, cost-plus turnkey model. For the global aluminium value-chain 2026 outlook, book our exclusive report “Global ALuminium Industry Outlook 2026" The key...