
India has initiated an anti-dumping (AD) investigation into aluminium imports from China, Malaysia, Vietnam and Thailand, bringing overseas supply and domestic manufacturing competitiveness under the lens. Launched by the Directorate General of Trade Remedies (DGTR) under Rule 5(4), the probe could have implications for around 228 Indian aluminium manufacturers, as nine domestic producers seek protection from allegedly cheaper imports. The development is expected to keep shares of Hindalco Industries, Bharat Aluminium, National Aluminium and Vedanta in focus during Thursday’s trading session. Aluminium demand in India spans several sectors. Power, packaging, transportation, construction, machinery and equipment are to name some. Ministry of Mines data show that the electricity sector...
Valeo unveils its aluminium Rear Door Cooling Module (RDHx) offering a 38 per cent boost in cooling capacity and a 65 per cent increase in power density compared to conventional copper equivalents. Valeo also exhibits its full range of liquid cooling solutions including Direct-to-Chip (DtC) Cold Plates, Cooling Distribution Units (CDUs) in rack manifolds and loop heat pipe innovations. At Data Centre World (Tech Show Paris) from November 18 to 19, 2026, visitors at Booth M100 (Hall 5, Paris Expo Porte de Versailles) will get their first hands-on look at Valeo’s new aluminium Rear Door Cooling Module, showcased alongside a complete lineup of thermal management solutions. As artificial intelligence (AI) workloads and high-performance computing (HPC) are pushing individual chip TDP (Thermal...
Grow with
AL Circle

A long-term agreement is being signed between the Aluminium rolling and recycling company Gränges AB and the circularity and recycling solutions provider NG Nordic. Gränges has extended the partnership between the two companies to procure recycled aluminium to feed its Finspång production facility in Sweden. The increasing use of recycled aluminium is a firm step toward reducing the carbon footprint and improving resource efficiency while promoting sustainability. Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across the value chain Gränges is focused on processing and reusing aluminium in order to produce advanced aluminium solutions. The long-standing partnership between the two firms is built upon deliveries received by Gränges from...

India’s leading metals manufacturer , Vedanta Limited, is expected to close FY2025–26 on a strong note, as analysts project a sharp earnings upswing in the January-March quarter (Q4). This performance has received considerable support from favourable London Metal Exchange (LME) price trends . Firm prices for aluminium, zinc and silver are expected to drive growth across the company’s primary business segments. Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across the value chain Brokerage estimates are pointing towards a substantial year-on-year (Y-o-Y) expansion in profitability, with adjusted profit after tax (PAT) to rise approximately by 174 per cent. The improvement is attributed to higher commodity prices, greater volumes, and a...

On April 27, the London Metal Exchange (LME) aluminium price inched down, showing an easing trend from the previous day’s close. However, the longer dated contracts continued to rise with a significant decline in the inventories. The LME cash bid and offer inched down by USD 23 per tonne or 0.6 per cent, where the bid shifted from USD 3,683 per tonne to USD 3,660 per tonne and the offer from USD 3,685 per tonne to USD 3,662 per tonne. Don’t miss out- Buyers are looking for your products on our B2B platform At the forward contracts, the 3-month bid declined by USD 10.5 per tonne or 0.3 per cent, changing to USD 3,587.5 per tonne from USD 3,598 per tonne. At the same time, the 3-month offer also decreased by USD 12 per tonne or 0.33 per cent, from USD 3,600 per tonne to USD 3,588 per tonne....

India’s power sector has entered a new phase of resilience, with solar energy emerging as a strong force in meeting record electricity demand. Prompted by intense summer consumption, the country successfully addressed an all-time high peak demand of 256 gigawatts (GW), highlighting the growing role of renewable energy in stabilising the Indian energy mix . Accounting for around 22 per cent of total generation, solar industries contributed nearly 57 GW at the peak load recorded in the afternoon of April 24, which stood at 256.1 GW. Earlier that day, solar energy output surged even higher, reaching almost 81 GW and making up approximately one-third of the total electricity generation. Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across...

For the year ending December 31, 2025, Fujian Minfa Aluminium Inc. experienced a downturn in its financial performance compared with the previous year. Revenue came in at CNY 1896.75 million (USD 277.44 million), marking a decline from the CNY 2229 million (USD 326 million) recorded in 2024. The company also moved from profitability into loss, posting a net loss of CNY 29.71 million (USD 4.3 million), whereas it had achieved a net profit of CNY 20.77 million (USD 3.04 million) the year before. This shift was reflected in its per-share figures. Basic loss per share from continuing operations stood at CNY 0.03, in contrast to basic earnings of CNY 0.02 per share in the prior year. On a diluted basis, the company likewise reported a loss of CNY 0.03 per share, compared with diluted earnings...

South32's Hillside Aluminium smelter in Richards Bay is celebrating 30 years of operations, marking a major milestone in the global aluminium industry. The achievement came after the firm's ongoing commitment to boost regional industrial growth, creating jobs and enhancing export competitiveness. Being one of the largest aluminium smelters, this facility reflects that large-scale primary aluminium operations can play a vital role in strengthening supply resilience while also supporting broader economic and community development goals in South Africa. From inauguration to today Since its inception back in 1996, the smelter has focused on achieving a bigger vision, by showcasing a strong belief in South Africa’s future, local industries and the promise that large-scale investments can...

Saad bin Sherida Al-Kaabi, Minister of State for Energy Affairs and president and CEO of QatarEnergy, hosted a farewell reception for Khalid Mohammed Laram, former CEO of Qatar Aluminium (Qatalum). Don’t miss out- Buyers are looking for your products on our B2B platform Al-Kaabi said, “For over 10 years, Mr Khalid Laram was the steady hand that ensured the continued success of Qatar’s renowned world-class aluminium smelter. I would like to express my deepest gratitude for his remarkable accomplishments and valuable contributions both at Qatalum and QatarEnergy and its group companies.” Also Read: Temporary dip in the aluminium prices reverses as supply tightness outweighs Hormuz reopening optimism Laram began his career with QatarEnergy in 1985. He was involved in the early development of...

In the Muir House district and the surrounding areas of northwest St Ann, farmers will be receiving benefits from a new storage pond with a capacity of 2.5 million gallons. This project is being initiated by Discovery Bauxite in collaboration with the Ministry of Agriculture and Mining, along with the Rural Agricultural Development Agency (RADA). For the project, the ground was broken on April 10 in the presence of the government officials and other related stakeholders. The Minister of State in the Ministry of Agriculture, Fisheries and Mining, Franklin Witter, appreciated that the bauxite firm is taking an active role in contributing to the initiative. He also added that the new water storage facility will create additional value to the agriculture sector of the region. Owing to this,...

The opening quarter of 2026 presents a curious contradiction. On the surface, global aluminium production slipped-from 18.6 million tonnes in Q4 2025 to 18.3 million tonnes in Q1 2026, a 1.6 per cent decline. But step back, and the bigger picture tells a different story: output remains 1.1 per cent higher than Q1 2025 levels. So what changed so quickly-and why did almost every region move in the same direction? A cooling cycle, starting with China in Q1 2026 The slowdown did not come from one place. It showed up everywhere, almost at once. China, which still dominates global supply, nudged lower from 11.1 million tonnes in Q4 2025 to 11.0 million tonnes in Q1 2026 - a 0.9 per cent dip. On paper, that looks minor. In reality, it says a lot about where the system stands today. With a de...

American producer of semi-fabricated aluminium products, Kaiser Aluminum Corporation, has posted its financial report for the January-March quarter (Q1) 2026, reporting record profits and raising the annual outlook to a considerably higher level. Keith A. Harvey, Chairman, President and Chief Executive Officer of the company, stated, “Our strong finish to 2025 carried into 2026, giving us the confidence to raise our full-year outlook.” Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across the value chain Q1 2026 financial highlights For Q1, 2026, Kaiser Aluminum reported a broadly improved performance across most segments, supported by higher shipments and stronger pricing dynamics. Financial performance, compared year-on-year with Q1...

Chongqing Shunbo Aluminium Co., Ltd. witnessed an impressive increase in its financial performance in the fiscal year 2025, owing to considerable growth in both income and profits as compared to the previous year. For 2026 aluminium market outlook, download our report TOC: Global Aluminium Industry Outlook 2026 The firm recorded total sales of CNY 15,985.4 million (USD 2,238 million) as compared to sales worth CNY 13,976.81 million (USD 1,956 million) recorded by the firm in 2024. Total net income for the year was recorded at CNY 221.64 million (USD 31 million) as against CNY 55.7 million (USD 7.8 million). Also Read: Scrap takes control: Inside aluminium’s shift to a circular, volatile market Basic earnings per share from continuing operations stood at CNY 0.33 (USD 0.046), rising from...

As aluminium prices continue to experience an upward trend since the start of the Middle East conflict, shares of Press Metal Aluminium Holdings Berhad, the largest integrated aluminium producer in Southeast Asia, achieved a record all-time high on April 24. The stock experienced an intraday high of 5.1 per cent or 41 sen, reaching MYR 8.48 (USD 2.14) per share, before closing at 8.42 (USD 2.13) per share, reflecting a 4.3 per cent rise. Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across the value chain Year-to-date (YTD) record shows that the company’s shares have risen 19.43 per cent, climbing from MYR 7.05 (USD 1.78) per share on January 2, 2026, to MYR 8.42 (USD 2.13) on April 24. A 74.69 per cent year-on-year (Y-o-Y) can be...

A temporary dip in the aluminium prices has been noticed when the traders got the ray of hope of reopening the Strait of Hormuz, which continued to show an upward trend due to the ongoing conflict in the Gulf. However, the production data and evolving dynamics of the Chinese markets are deemed to boost both the aluminium and copper markets. Nudged because of the possible reopening of the Strait of Hormuz, the key shipping area, aluminium slipped and bounced back as concerns about supply continue to loom large. Last Thursday, the aluminium prices hit a new four-year high, reaching nearly USD 3,700 per tonne. Post that, the prices saw a slight dip, recording USD 3,450 per tonne, before it bounced back again. In the London Metal Exchange (LME) 3-month aluminium price, it expanded to USD...

London Metal Exchange (LME) aluminium prices recorded improved figures on April 24 compared to the previous close. Cash price reported gains by wide margins, near-term futures contracts recovered from the previous session’s decline, while longer-dated contracts and opening stocks continued to slide. Explore- Most comprehensive and forward-looking industry-focused report — Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade Flows & Price Outlook The LME aluminium cash bid price rose from USD 3,641.5 per tonne on April 23 to USD 3,683 per tonne on April 24, increasing by 1.14 per cent. The cash offer price climbed from USD 3,642 per tonne to USD 3,685 per tonne, up 1.18 per cent day-on-day. The three-month contract followed a similar trend. The LME aluminium 3-month bid...

Renewable energy is moving from supportive to strategic role as it is set to account for 45 per cent of the global electricity generation. This marks a structural shift in how industries will be powered. China, Europe, the United States, and India are at the centre of this transformation, driven by rapid additions in solar, wind, and hydropower capacity. While these regions lead the clean energy buildout, they also represent some of the world’s most significant aluminium production hubs, where electricity remains the single most critical input cost. So, this calls for an evaluation that how far the clean power surge in these regions is translating into lower-carbon aluminium production across these major regions. Before that assessment, the scale of the renewable buildout itself deserves...

The geopolitical tension involving Iran has disrupted alumina markets, not only by limiting exports through the Strait of Hormuz but also by restricting the inflow of raw materials into the Gulf region, thereby tightening supply chains and raising operational risks for smelters dependent on imported alumina. Aluminium smelters in the Gulf depend heavily on imported alumina, the intermediate product between bauxite and aluminium. The region has six smelters but only two alumina refineries. One of them, operated by Emirates Global Aluminium at Al Taweelah, has been damaged, forcing shutdowns. Other smelters are running at reduced capacity. For the global aluminium value-chain 2026 outlook, book our exclusive report “ Global ALuminium Industry Outlook 2026 " Now, disrupted demand from the...

An Australian research collaboration is exploring whether nickel-aluminium bronze (NAB) can be produced via 3D printing for maritime spare parts. Backed by Charles Darwin University and supported through the Queensland Defence Sciences Alliance, the initiative brings together James Cook University, the Australian Institute of Marine Science, and manufacturing firm SPEE3D. The emphasis is on a widely used alloy found in propellers, pumps, valves, and bearings, as well as components that are currently not manufactured at scale in Australia through traditional means. According to lead investigator Professor Kannoorpatti Krishnan of Charles Darwin University, the effort is intended to cut operational delays, improve reliability at forward bases, and maintain effectiveness in demanding...

The board of the Recycled Materials Association (ReMA) has given tentative approval to add a new specification called “ginger” to its ISRI Specifications booklet. The proposed ginger grade refers to wrought aluminium materials such as sheet, extrusion, and plate that are separated from mixed shredded scrap categories like zorba and twitch. These existing grades mainly contain shredded aluminium but allow higher levels of mixed metals and contaminants. Ginger is designed as a more refined and tightly controlled category. For the global aluminium value-chain 2026 outlook, book our exclusive report “ Global ALuminium Industry Outlook 2026 " According to ReMA, the material must be dry and meet strict limits. It should not contain more than 1 per cent free magnesium, 1 per cent free zinc, and...