Calculate Embedded Emissions for Unwrought Aluminium (HS7601)

Enter your input

Payable emissions (tCO₂e/t)

Total CBAM Cost (€)

Notes:
There may be a difference when calculating the price with respect to import volume, carbon price, and benchmark emissions, as the embedded formula may result in minor variations due to decimal rounding. Therefore, the actual value may vary.

CBAM is applicable to trade volumes starting from 50 metric tonnes. For trade volumes below 50 metric tonnes, CBAM does not apply.

Usage Procedure – How to use the CBAM Calculator Sheet

Enter or update values only in the INPUT
PARAMETERS section (Highlighted in blue) , including
the carbon price, benchmark emissions, CBAM
chargeable percentage (as per the phase-in year),
and imported quantity.

The system will automatically calculate the payable
emissions and the total CBAM cost (€) based on the
inputs provided.

Notes:
• Change any input value to automatically update CBAM cost.
• Formula used: Carbon price × payable emissions × quantity.
• Model aligned with CBAM supplier-side illustrative methodology.

09 NOVEMBER 2016 AL CIRCLE

Larson Electronics releases LED Light Fixture with corrosion resistant aluminium reflectors

EDITED BY : DIPANWITA GUPTA 2MINS READ

Larson Electronics, a company that has been serving the industrial and commercial businesses for over 40 years, has released a two foot explosion proof LED light fixture equipped with a single 14 watt white output lamp and a six watt LED light, which produces a red colour output.

The EPL-24-2L-LED-VISRED explosion proof LED light fixture from Larson Electronics is United States and Canada UL approved Class I Division I, Class II Division I and is an ideal lighting solution for areas where flammable chemical and petrochemical vapours exist. This two foot fixture is a powerful yet compact hazardous location lighting solution that will improve overall illumination levels and light quality while reducing operating costs. The 14 watt LED lamp produces 30 percent more illumination than a standard T8 fluorescent lamp and offers lower amp draw and increased reliability. This lamp produces 1,750 lumens of visible, bright white light. The six watt red output LED produces 600 to 675 nanometers of light on the wavelength spectrum.

News

The LED light sources are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminium alloy. The reflectors are corrosion resistant heavy gauge aluminium, coated with a high gloss reflective finish. The fixture is universal voltage and operates on 120 to 277 volts AC and is also available for operating on 11 to 25 volts DC for low voltage applications. These units come standard for surface mounting. Each surface mount bracket is cinched to a peg on each side of the light. The bracket is mounted with a single bolt hole at the top of the bracket. Pendant mounting options are also available, allowing operators to suspend the fixture from a surface.

{googleAdsense}

“By eliminating the ballast box that is normally associated with fluorescent fixtures, we have reduced the overall weight and created a slimmer profile,” said Rob Bresnahan, CEO of Larson Electronics. “Each lamp in this unit has individual leads, allowing operators to power them independently of one another.”

Larson Electronics carries an extensive line of LED light towers, portable power distributions, explosion proof lights for hazardous locations, portable work lights and industrial grade LED area lights.