South Asia’s beverage-can manufacturing capacity continues to expand, with Bangladesh preparing to enter the industry through a USD 100 million aluminium beverage can plant while new and expanded facilities advance across India, Pakistan and Afghanistan. However, the planned Bangladeshi project still faces a key infrastructure hurdle: securing a gas connection before production begins. Chinese-owned Alu Hi-Tech Industries Ltd is developing Bangladesh’s first aluminium beverage can plant at Kaliakoir Hi-Tech Park in Gazipur, north of Dhaka. The facility is designed to produce around 1 billion cans annually, with approximately 90 per cent of its output earmarked for export markets. The company registered with the hi-tech park in 2024, when work on the project began. Construction has...
Europe’s beverage-can market outperformed other regions in the third quarter, prompting Ardagh Metal Packaging (AMP) to accelerate its investment plans with two new production lines at existing facilities in the UK and Spain. Global beverage can shipments rose 2 per cent year on year in the three months to September 30, while Europe recorded 6 per cent growth, contrasting with a 1 per cent decline across the Americas. AMP announced the expansion alongside third-quarter results that exceeded its own earnings guidance, allowing the company to raise its full-year adjusted EBITDA outlook. Chief executive Oliver Graham said demand remained resilient across the company’s markets, supported by strength in key beverage categories and continued gains for cans within the wider packaging mix. The...
Grow with
AL Circle
Bering Yachts has unveiled the first hull of the Bering BC60, marking the company’s entry into the aluminium explorer catamaran segment. Designed as a long-range expedition vessel, the BC60 expands Bering’s explorer yacht portfolio by combining ocean-going capability with the efficiency and stability of a twin-hull platform. Built using only aluminium, the BC60 has been designed specifically for its longevity, ease of operation, and ability to venture out to far-off destinations. Its shallow draft, measuring 1.3 meters, allows it to sail into shallow bays and coral waters, which many other yachts cannot enter owing to their deep drafts. The explorer catamaran has a fuel capacity exceeding 13,500 litres and offers a cruising range of more than 3,000 nautical miles. According to the...
Jenc has recently developed a 70 metre aluminium spray boom designed specifically for large-scale farming necessities and the company claims that it is the widest model in the market till date. The boom has already been incorporated into the Nexat multifunctional farming platform used in Brazil. Explore forward-looking industry-focused report — Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade Flows & Price Report According to Jenc, the main purpose of the project was to increase the working width and also field efficiency without making the machine excessively heavy that could affect its stability and performance. To achieve that, the company used aluminium instead of heavier conventional materials, helping reduce overall mass while still supporting the large span...
ROLEC has launched a new line of diecast aluminium enclosures aimed at protecting in-cab control systems used in sectors such as agriculture, construction and heavy engineering. The new profiCASE range is designed for human-machine interface systems, commonly known as HMIs, which are increasingly used for touchscreen controls and electronic operations inside off-highway vehicles. Although these systems are installed inside enclosed cabins, the company said they still need protection against dust, moisture and vibration because of the harsh environments in which the vehicles operate. Explore our report World Recycled ALuminium Market Analysis Industry forecast to 2032 for detailed analyses and projections The enclosures come with IP65, IP66 and IP67 protection ratings and are built to...
A group of scientists in China has turned to crocodiles for inspiration while working on a new body armour concept built around lightweight ceramic materials. The idea came from the way crocodile scales overlap across the animal’s body. Instead of sitting in neat patterns, the scales form uneven layers that help spread force and provide protection during attacks. The research was done at Ningbo University, led by associate research fellow Zhaoxiu Jiang. They based their design on the overlapping, asymmetrical skin of a crocodile that offers them protection against predators. For the global aluminium value-chain 2026 outlook, book our exclusive report “Global ALuminium Industry Outlook 2026" According to the research team, the layout helped deflect projectiles during testing instead of...
Ferretti Group has launched the fifth hull of its Pershing 140 superyacht series at the company’s Superyacht Yard in Ancona, Italy. Unlike earlier units in the series, which used a metallic aluminium-grey finish, this version was completed in bright white following requests from the owner. The lighter theme continues inside the yacht as well, with interiors designed around softer tones and customised living spaces. Several parts of the layout were also changed from the standard configuration. At the stern, the area typically used for storing tenders and water toys was redesigned into a social space with a central bar setup instead. For the global aluminium value-chain 2026 outlook, book our exclusive report “Global ALuminium Industry Outlook 2026" The cockpit section now includes lounge...
Asian private equity firm MBK Partners is set to acquire Japanese aluminium can producer, Altemira Holdings Co. in a deal valued at around YEN 117.5 billion (USD 760 million), according to industry sources. The acquisition involves MBK Partners acquiring 100 per cent of Altemira from US-based investment firm Apollo Global Management. Altemira is the second-largest aluminium can manufacturer by market share in both Japan and Vietnam, with annual revenue estimated at approximately YEN 200 billion (USD 1.29 billion). MBK Partners has already cleared the preliminary review required under Japan’s foreign exchange regulations for foreign acquisitions involving companies operating in designated core sectors. According to sources, the screening was triggered because some of Altemira’s materials...
In the global shift towards more sustainable packaging, aluminium beverage cans are often positioned as a near-ideal solution – infinitely recyclable, lightweight, and increasingly favoured by brands seeking both environmental credibility and shelf appeal. In Africa, however, their growth tells a more complex story. Demand is rising, but unevenly, shaped by competing realities: aspiration and affordability, formal industry and informal systems, global ambition and local constraint. Demand for aluminium cans is growing across the continent, though not in the same way as in Europe or North America. Here, the transition remains uneven, unfolding against structural and economic limits. Iris Arsic, the features editor of The Metal Packager, speaks with Chukwuma Ndigwe, recycling team lead at...
California-based beverage company Monster Beverage may raise its product prices incrementally through 2026 in a move to offset aluminium and freight costs due to the ongoing Middle East conflict. However, the company believes this move would not affect the consumption pattern of energy drinks, following their previous experience when the market remained resilient even after they increased prices. Company executives said aluminium prices and freight expenses increased during the first quarter, partly due to tariffs and supply disruptions linked to geopolitical tensions in the Middle East. They added that further price increases may be considered if costs continue to rise. To know the long-term bauxite market forecast, book our report: “ Global Bauxite & Alumina Market Forecast to 2036:...
El Jefe Energy has won the latest edition of the Colored by INX Can Design Contest, with its “Sinister Razz” coming out on top after combined scoring from judges and online voting. The design was forwarded through manufacturing partner Can-One USA, an aluminium can producer, and stood out for its darker visual style and artwork-heavy approach, which the company said was meant to move away from more generic energy drink packaging. According to INX, this year’s competition drew a much larger number of entries than usual, with participation nearly doubling compared to previous editions. For the global aluminium value-chain 2026 outlook, book our exclusive report “Global ALuminium Industry Outlook 2026" Jeanie Morris, who oversees the contest, said the increased participation brought a wider...
AIDO, an endorsed brand of Dormakaba, offers products like door hardware, electronic access control, interior glass systems, and hotel locking systems and has participated in the Aluminium Expo 2026, which took place between May 1–3 at the Calicut Trade Centre, organised by the Aluminium Dealer Forum, according to a press release. At the expo, the brand showcased its SLYNK Profiled Door System along with its cutting-edge Digital Door Lock range, designed especially for architects, interior designers and facade consultants. The firm's presentation at the expo showed its continuous commitment towards innovation, design excellence and forward-thinking architectural solutions, where door systems, security and spatial aesthetics come together seamlessly. Also read: DERCHI advances aluminium...
DERCHI Doors and Windows has introduced its patented six-point locking technology for aluminium picture windows as demand increases for more secure and energy-efficient building materials across residential and commercial projects. The company said picture windows are increasingly being designed not only for panoramic views but also for stronger structural performance, particularly in regions exposed to extreme weather conditions or where enhanced security is required. To know the long-term bauxite market forecast, book our report: “ Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade Flows & Price Outlook ” DERCHI compared its Four-Side Six-Point Lock system with conventional window hardware that typically secures the frame at only one or two positions, often along the...
ReLid’s newest aluminium can design has redefined beverage packaging by combining resealability with full recyclability, addressing long-standing trade-offs between plastic bottles and conventional cans. Developed by ReLid USA, the innovation features a patented sliding tab mechanism that allows consumers to open and reseal the can multiple times. Unlike standard cans, which once opened are prone to spillage, the new design enables users to “lift the tab end and slide it open to drink” and then reseal it by sliding the tab back into position. The company states the mechanism can support at least 14 reseals without compromising functionality. The technology originated in 2020 at Re-Lid Engineering AG, with ReLid USA serving as its exclusive North American licensee. The development focused...
The award-winning company, known for its 100 per cent organic wines, Vinca, is now launching its sustainable, recyclable aluminium-bottled red and white wines in M&S Food stores across the UK starting May 6, 2026. Well-known for its acclaimed canned wines, which were first introduced back in 2021, the firm has been pushing its limits for innovating sustainable wine packaging solutions, which go beyond its launch in the UK's first full-sized wines in 100 per cent recycled aluminium bottles, which were priced at £10.50 (USD 13.95) for 750ml. Aluminium's lightweight feature comes in organic red Syrah and Nero D’Avola, along with organic white Catarratto, which are sourced from family-owned sustainable vineyards in Sicily. Also read: Crown Holdings posts a rise in net sales as global...
Nissan has announced plans to streamline its operations in Europe, including cutting around 900 jobs and merging production lines at its UK plant in Sunderland. The company said it will combine two production lines at the Sunderland facility, where the Leaf, Juke and Qashqai models are built. It clarified that this change will not result in huge job losses at the plant, but will trim down a small number of UK-based office roles (though the estimated figure is 900) as part of broader European cuts . To know the long-term bauxite market forecast, book our report: “ Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade Flows & Price Outlook ” The planned reduction represents about 10 per cent of Nissan’s European workforce. The restructuring also includes closing part of its...
Ball Corporation, one of the leading supplier of aluminium packaging reported higher earnings in the first quarter of 2026, helped by slightly higher shipment volumes and better operating performance. The company posted net earnings of USD 205 million, up from USD 179 million a year earlier. Diluted earnings per share rose to USD 0.77 from USD 0.63. On an adjusted basis, earnings per share increased to USD 0.94 from USD 0.77, about a 22 per cent rise. Sales reached USD 3.60 billion in the quarter, compared to USD 3.10 billion in the same period of 2025. Comparable operating earnings also increased to USD 387 million from USD 352 million. Global aluminium packaging shipments grew by 0.8 per cent. Growth came from North and Central America and Europe, while South America saw lower volumes....
AGI Greenpac, a leading packaging products company in India, has inaugurated the construction of its aluminium beverage can manufacturing facility with the ground-breaking ceremony. The project is worth INR 10 billion (USD 105 million) and spans across 34 acres, located in Hathras, Uttar Pradesh. Rajesh Khosla, the CEO, mentioned, “This investment reflects our deep conviction in India’s growth trajectory and the significant opportunities within the domestic packaging sector.” Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across the value chain High-speed and cutting-edge production systems are being installed in the greenfield facility to make it a modern manufacturing hub, expected to become operational by June 2027. The initial...
As ongoing geopolitical tensions of the Middle East conflict and the resulting inflation and shifting market dynamics bring Europe and the United States to experience a fading demand in the automotive industry, including Ford Motor Company, Stellantis, General Motors, and Volkswagen Group, auto component manufacturers eye the automotive market of India, which has been displaying robust growth. Since the 1991 de-licensing, the sector has been backed by the ‘Make in India’ initiative. The post-pandemic boom cemented India’s position as the fourth-largest player in automobile production on the global platform. Explore- Most accurate data to drive business decisions with Global ALuminium Industry Outlook 2026 across the value chain Although India does not remain untouched by the impacts of...
Crown Holdings, Inc. reported a solid start to 2026, supported by higher beverage can shipments and improved adjusted earnings, despite a slight decline in net income. Net sales for the first quarter ended March 31, 2026, rose to USD 3.26 billion, compared to USD 2.89 billion in the same period last year. The increase was driven by a 5 per cent rise in global beverage can shipments, along with the pass-through of higher input costs and favourable foreign exchange movements. To know the long-term bauxite market forecast, book our report: “ Global Bauxite & Alumina Market Forecast to 2036: Supply–Demand, Trade Flows & Price Outlook ” Timothy J. Donahue, Chairman, President and CEO of the company, said, “Global beverage can volumes advanced 5 per cent, led by robust shipments throughout...
