Alumil India, the fully-owned Indian subsidiary of Alumil Group, has successfully delivered advanced fenestration solutions for NICMAR University in Pune, transforming a precast campus vision into a functional, durable and future facing learning environment. The project required approximately three hundred windows within a tight timeline which was successfully delivered by Alumil India. The project deployed Alumil’s top-hung window systems combined with sleek mullions and glazing. “NICMAR University presented an opportunity to demonstrate how fenestration can become an integral part of both a building’s architecture and its performance. The project required us to respond to large openings, intensive daily usage, acoustic and weather considerations, safety, and the specific challenges of...
Anshika Jain resigned as Company Secretary and Compliance Officer of Golkonda Aluminium Extrusions Ltd. on October 24, 2026, citing personal reasons. The company informed the Bombay Stock Exchange about her resignation under Regulation 30 of the SEBI Listing Obligations and Disclosure Requirements Regulations, 2015. To know the global production, demand and consumption forecasts of aluminium extrusions, explore our report " The World of Aluminium Extrusions to 2035 " In her letter, Jain said there were no other reasons for her resignation beyond the personal reasons mentioned. She also asked the Board to accept her resignation and complete the required formalities under the Companies Act, 2013. Managing Director Geeta Sethi signed the disclosure on behalf of the company’s Board. The...
Grow with
AL Circle
In the dynamic and constantly evolving landscape of energy infrastructure, progress is driven by the synergy between engineering excellence and dependable materials. A prime example of this is the collaboration between PLP Australia and Capral Aluminium, whose combined expertise has been instrumental in advancing one of Australia's major energy projects—Project EnergyConnect. Project EnergyConnect (PEC) is a landmark 900-kilometre interconnector that unites the electricity grids of New South Wales, Victoria, and South Australia for the first time. The aluminium used in the busbars for Project EnergyConnect is sourced from Capral, not just as a supplier, but as a trusted long-term partner to PLP. Adam Talbot, General Manager of Sales and Marketing at PLP Australia, said, "If there is an...
In the first quarter of 2025, European aluminium foil rollers experienced a significant uptick in demand. According to the European Aluminium Foil Association (EAFA), total deliveries reached 243,900 tonnes, marking an 11.4 per cent increase compared to the same period in 2024. This growth was driven by heightened demand within Europe and in export markets. Domestic deliveries within Europe rose by nearly 11 per cent, while exports saw an approximate 18 per cent increase. The export surge is partly attributed to anticipatory effects stemming from current trade policies, especially in the Americas. Concerns over potential cost increases from impending aluminium foil tariffs may have prompted many American companies to ramp up their stockpiles. This robust performance contrasts sharply with...
Hong Kong-based aluminium company Kam Pin Industrial is expanding into the US market, urging overseas partners to remain their allies despite ongoing China-US trade tensions. Kam Pin Industrial is a rising leader in producing aluminium curtain walls for architectural exteriors. Image source: semi.org The multinational business established a certain international reputation due to its Dongguan production base in a neighbouring Guangdong province. This had been possible for the company because of its top-notch quality aluminium curtain walls. Adding to this, domestically as well as internationally, the lightweight feature of aluminium makes it highly demanding in the cladding for buildings, allowing versatile designs. The firm's extra innovation with the colour and aluminium used as...
Hindalco Industries will begin local production of aluminium battery foils in India by the end of October 2025, aiming to reduce import dependency, support EV growth and meet demand for lithium-ion cell components. The project will require an investment of INR 800 crores to construct a 25,000-tonne capacity plant in Orissa to produce battery-grade aluminium foil. Image source: indiamart Lithium-ion technology is a key focus for Hindalco, as all three metals it works with, aluminium, copper and Specialty Alumina, play crucial roles in battery production. Aluminium foil serves as a cathode substrate, copper as an anode substrate, and Specialty Alumina as a ceramic coating. Aluminium also offers significant advantages for electric vehicles. Its superior thermal stability and heat dissipation...
Tirupati Graphite, a UK-based, fully integrated specialist in graphite and graphene production, has developed a revolutionary development that could serve as a greater alternative to copper and profoundly impact the global industries. The company is pushing boundaries with its Graphene-infused aluminium composites (Al-Gr), the new kind of material that can be called a lightweight, cost-efficient alternative to copper in vital applications. Copper, the current king for electrical use, is highly expensive, heavy and in demand. This discovery of Graphene-infused aluminium composites forms a next-generation composite that significantly enhances aluminium’s inherent properties. A quiet revolution is underway in materials science, with far-reaching implications for global industries. This...
On May 8, 2025, Hydro, a Norwegian aluminium and renewable energy company, announced the closure of two of its extrusion sites in the United Kingdom (UK) and France. Decreased demand and subdued recycling margins in the downstream aluminium market are the major causes behind the site closures. Image source: Wikipedia.com The two facilities that Hydro is planning to close include an anodising facility in Luce, France and an extrusion site in Birtley, UK. Apart from this, the firm is also planning to cut down nearly 30,000 tonnes of its recycling capabilities in Puget, France. The relevant people have informed that the closure at the Birtley site will be completed by the end of June, and the Luce site will be down by the end of September. The Luce facility manufactures around 62,000 tonnes...
Researchers from the Fraunhofer Institute for Production Systems and Design Technology IPK in Berlin, Mecklenburger Metallguss GmbH in Waren, and Technische Universität Berlin have published a paper in Additive Manufacturing that examines the processability, microstructure, and mechanical properties of nickel-aluminium-bronze (NAB) grinding chips. Nickel-aluminium bronze (NAB) is a copper-based alloy known for its strength and exceptional corrosion resistance particularly suited for marine environments. Typically, these alloys comprise 9-12 per cent aluminium, up to 5 per cent iron, and 3 per cent nickel. These chips, a by-product of ship propeller production, were tested as feedstock for Directed Energy Deposition (DED) Additive Manufacturing. The study compared the 'chip-powders'...
AMAG Austria Metall AG, the biggest company in the Austrian aluminium sector, has announced the results for Q1 2025. The company witnessed growth in both revenue and earnings, with a 10 per cent rise in shipments under the rolling division, while the Metal Division benefited from higher aluminium prices and increased premiums. As anticipated, the challenging conditions in the European automotive sector had a noticeable impact on the Casting Division. AMAG Group's revenues rose by nearly 20 per cent to EUR 401.4 million in Q1 2025, up from EUR 335.8 million in Q1 2024, driven by higher shipment volumes and increased aluminium prices. Total shipments grew by approximately 6 per cent to 110,800 tonnes, compared to 104,200 tonnes in the same period last year. Earnings before interest, taxes,...
In less than a year, the central government of India has yet again introduced an amendment to the quality control regulations for aluminium and aluminium alloy products, set to take effect on October 1, 2025. Under the new directive, several aluminium products will be subjected to updated quality checks. These include aluminium alloy tubes used for irrigation (such as welded tubes), EC grade aluminium rods made through continuous casting and rolling, and wrought aluminium and aluminium alloy bars, rods, and sections, among others. However, exemptions have been made for imported products used in research and development. Additionally, small enterprises are allowed to import products that do not comply with the new Quality Control Order (QCO) until January 1, 2026, while micro enterprises...
General description The GAP Level Sensor is designed to measure the metal level in molds and allows an extremely precise casting regulation despite the high-temperature present near a melted metal. The system consists of a suitable measuring head fixed on an electrical lifting jack. The latter is equipped with an incremental encoder for distance measurement with two limit switches. This setup brings a wide range of precise measurements. The electronic collects the signals, transmits the calculated value of the metal level to the casting machine and ensures that the head movements avoid any metal collisions. The calibration is easy enough for the customer to execute themselves. With our modernised electronics, this operation is even more straightforward and user-friendly. This new...
A team of Indian researchers from Shiv Nadar University in Delhi-NCR has developed a bioinspired aluminium surface with promising applications across marine engineering, food packaging, and healthcare. The study published in 'Colloids and Surfaces B: Biointerfaces,' demonstrated how nature-inspired designs (from the shape of lotus leaves to insect wings) can help produce multifunctional aluminium surfaces that are water-repellent, corrosion-resistant, antibacterial, and self-cleaning with minimal water use. Led by Harpreet S. Grewal, the researchers achieved these properties by engineering micro- and nanostructures on aluminium through a cost-effective and environmentally friendly fabrication method. The process involved imprinting aluminium sheets with micro-patterns, followed by...
Nord Drivesystems will showcase its latest drive innovations at the iba 2025 in Düsseldorf, tailored for hygienically sensitive applications in the baking and confectionery sector. A highlight of their presentation will be the NXD tupH process—NORD's advanced aluminium surface treatment technology—designed to meet the industry's stringent hygiene and durability requirements. The food industry imposes strict hygiene requirements on all equipment, including drive systems. In addition to offering high reliability and energy-efficient performance, these drives must also be easy to clean thoroughly and quickly. At iba 2025 in Düsseldorf, NORD will present a comprehensive range of solutions designed for hygienically sensitive environments. NXD tupH surface treatment for aluminium Nord's NXD...
Paul Warton, Executive Vice President of Hydro Extrusions, has been appointed as the new chairperson of European Aluminium, succeeding Philipp Schlüter of Trimet Aluminium. Paul Warton previously served as Treasurer on the Executive Committee of European Aluminium. Founded in 1981 and headquartered in Brussels, European Aluminium is a member-based industry association representing the continent’s most comprehensive and dynamic aluminium value chain. The organisation includes over 100 members, ranging from primary aluminium producers to manufacturers of extruded, rolled, and cast products, as well as recycled aluminium producers and national aluminium associations. Collectively, they represent more than 600 production sites across 30 European countries. “As the world becomes increasingly...
A microcap company in the aluminium sector, Sudal Industries, has reportedly hit a 52-week low and is expected to show a downward trend, especially after a consequential drop witnessed in the last week. Currently, the company's long-term performance is said to be weak, with additional challenges faced in debt servicing and high promoter share pledges, irrespective of representing good financial results. Image source: RRBB As of May 5, 2025, Sudal Industries has hit the latest 52-week low at INR 33.65 (USD 0.40), indicating it to be highly unpredictable. The trend of the company shows a decline where the share prices are said to be underperforming below its sector at 1.88 per cent indicating a total of 149.63 per cent drop in comparison to the last six days. Nonetheless, Sensex has opened...
Bengaluru, an Indian city known as the Silicon Valley of India, has pulled several eyeballs of aluminium manufacturing and supplying businesses. Bengaluru’s transformation from a pure‐play IT powerhouse into a specialised aluminium manufacturing hub is due to its fast rise in infrastructure, accompanied by a deep talent pool and a supportive policy environment. Over the past five years, the Tier I city has seen new extrusion lines, high‐precision CNC machining centres and powder‐coating facilities spring up, catering to sectors ranging from aerospace to renewable energy. Image for referential purposes only India, as an entirety, now produces over 4.2 million tonnes of primary aluminium annually, making it the world’s second‐largest producer. Yet, Bengaluru has shifted its focus from bulk...
RevoCast is set to build a state-of-the-art aluminium remelting facility in Langley, British Columbia, Canada, covering an area of approximately 11,148 m². Designed with sustainability at its core, the facility will operate using high recycled content and advanced technology to recycle and remelt a wide range of raw materials. Its primary goal is to lower carbon emissions while supplying remelt billets to the North American extrusion market. The groundbreaking ceremony for the facility is planned for the second quarter of 2025, with commissioning and the start of operations targeted for 2026. Thomas Martini, President & CEO of RevoCast, said, "By closing the loop and giving aluminium a second life, we're not only reducing our environmental impact but also ensuring a reliable and resilient...
Constellium SE, a global leader in the design and manufacturing of high value-added aluminium products, has reported robust financial results for the first quarter ended March 31, 2025. Despite ongoing challenges, including reduced shipment volumes and lingering impacts from severe flooding in Switzerland, the company posted a solid increase in revenue and a strong rebound in net income. Revenue for Q1 2025 reached USD 2 billion, reviving by 16.2 per cent from USD 1,721 million in the previous quarter and marking a 5 per cent rise year-over-year. Net income amounted to USD 38 million, reflecting a significant improvement from a net loss of USD 47 million in Q4 2024, and up 73 per cent from USD 22 million in Q1 2024. Ajusted EBITDA in Q1 2025 was USD 186 million, up by 50 per cent from USD...
Alumex PLC, Sri Lanka’s leading manufacturer of aluminium extrusion products, has strengthened its commitment to supply chain excellence by entering into a strategic partnership with the Institute of Supply and Materials Management (ISMM). This collaboration was officially established through the signing of a Memorandum of Understanding (MoU), with Alumex PLC Managing Director Pramuk Dediwela and ISMM President Jayantha Gallehewa in attendance. Under the MoU, ISMM will grant institutional membership to Alumex, while Alumex will extend priority access to ISMM students by offering internships and job placements. These opportunities will enable students to gain practical experience in supply chain management within Alumex’s advanced manufacturing environment. Alumex PLC Managing Director...
