Calculate Embedded Emissions for Unwrought Aluminium (HS7601)

Enter your input

Payable emissions (tCO₂e/t)

Total CBAM Cost (€)

Notes:
There may be a difference when calculating the price with respect to import volume, carbon price, and benchmark emissions, as the embedded formula may result in minor variations due to decimal rounding. Therefore, the actual value may vary.

CBAM is applicable to trade volumes starting from 50 metric tonnes. For trade volumes below 50 metric tonnes, CBAM does not apply.

Usage Procedure – How to use the CBAM Calculator Sheet

Enter or update values only in the INPUT
PARAMETERS section (Highlighted in blue) , including
the carbon price, benchmark emissions, CBAM
chargeable percentage (as per the phase-in year),
and imported quantity.

The system will automatically calculate the payable
emissions and the total CBAM cost (€) based on the
inputs provided.

Notes:
• Change any input value to automatically update CBAM cost.
• Formula used: Carbon price × payable emissions × quantity.
• Model aligned with CBAM supplier-side illustrative methodology.

09 NOVEMBER 2020 AL CIRCLE

China’s alumina production exceeds 6 MT in October 2020 surging by 4.23% M-o-M: SMM

EDITED BY : DEBANJALI SENGUPTA 1MINS READ

According to the Shanghai Metals Market, China’s alumina production in October 2020 came in at 6.16 million tonnes, including 5.95 million tonnes of metallurgical-grade alumina. This marked an increase of 4.23 per cent from 5.91 million tonnes of output in September 2020.

{alcircleadd}

The average daily output in October climbed 1 per cent month-on-month from 189,000 tonnes to 192,000 tonnes. On a yearly basis, the daily output was up by 5.95 per cent.

The total production of metallurgical-grade alumina in the first ten months of 2020 amounted to 55.74 million tonnes 3.23 per cent lower over the year. As of early October, the operating capacity of metallurgical-grade alumina stood at 68.85 million tonnes per year.

SMM expects the production of metallurgical-grade alumina to decline in November 2020 at 5.62 million tonnes, with the daily output falling to 187,000 tonnes. SMM will continue to keep an eye on the effect of the heating season on works at construction sites.

Tagged with: