NewsSustainabilityEuropean Aluminium flags steel-only credit imbalance in EU’s 2035 automotive policy
AlCircle.com

European Aluminium flags steel-only credit imbalance in EU’s 2035 automotive policy

Edited by : Nilanjana Banerjee
4 min read
European Aluminium flags steel-only credit imbalance in EU’s 2035 automotive policy

Stock image for referential purposes only

As the European Union (EU) revises its CO₂ emission standards for cars and vans, European Aluminium is urging policymakers to recognise low-carbon aluminium alongside low-carbon steel in the proposed 2035 automotive credit system. The association, via its position paper, warns that restricting material-based emission credits to EU-produced low-carbon steel could distort vehicle design decisions, weaken the competitiveness of Europe’s aluminium industry and undermine the bloc’s technology-neutral approach to decarbonisation.

At the centre of the debate sits Proposal 2025/0420 (COD), which introduces a compliance offset for the 10 per cent of fleet emissions remaining after 2035. Under the proposed mechanism, manufacturers would be allowed to use fuel credits or credits related only to low-carbon steel.

However, excluding aluminium from the material-based flexibility would create an uneven playing field between two materials widely used in vehicle manufacturing and often interchangeable in component applications.

European Aluminium cites four factors to defend the place sought for low-carbon in the scope of the regulations.  

Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase the advancement of technologies in aluminium recycling

Aluminium’s role in vehicle lightweighting

European Aluminium argues that excluding aluminium could encourage manufacturers to favour steel components to secure regulatory credits, even where aluminium may offer a more suitable technical solution.

Aluminium can reduce component weight by approximately 40–50 per cent compared with steel. This advantage is particularly relevant to electric vehicles (EVs), whereby lower vehicle mass can improve efficiency, extend driving range and reduce the battery capacity required for a given range. A steel-only incentive could therefore encourage heavier vehicle designs, resulting in a “weight increase” of battery requirements, thereby leading to a larger carbon footprint during production. 

Aligning automotive policy with the Critical Raw Materials Act

The association also flags a disconnect with the EU Critical Raw Materials Act (CRMA), which sets a target for the bloc to process 40 per cent of its annual consumption of strategic raw materials domestically by 2030.

According to European Aluminium, excluding aluminium from the 2035 credit mechanism would weaken the demand signal needed to support investment in Europe’s domestic processing capabilities. It argues that automotive policy should align with the EU’s wider strategic objectives by rewarding the use of materials identified as critical to the region’s industrial and green transitions.

Looking for secondary aluminium? Explore a wide range of aluminium scrap and recycled aluminium products from global suppliers on AL Biz

Fortifying Europe’s aluminium industry

European Aluminium describes the aluminium sector as a key industrial pillar of the continent to support around one million high-quality jobs across the value chain. However, it says the industry is facing mounting pressure from uncompetitive energy prices, high regulatory costs, unfair market practices in third countries and scrap leakage.

The association warns that excluding low-carbon aluminium from the “Automotive Package” could further affect the sector’s investment outlook, accelerate deindustrialisation and increase the risk of carbon leakage.

A call for regulatory consistency

The position paper further argues that aluminium and steel should be treated together, as they are in other EU legislative frameworks, including the End-of-Life Vehicles Regulation, the Ecodesign for Sustainable Products Regulation and the Carbon Border Adjustment Mechanism (CBAM). Both materials serve comparable applications, face similar decarbonisation challenges and encounter competitive pressure from third countries, especially those with significant overcapacity.

Excluding low-carbon aluminium from the automotive CO₂ credit mechanism would therefore create an inconsistent exemption in EU legislation and undermine regulatory coherence.

To know the world's future aluminium recycling market and its growing trends, download our report - World Recycled ALuminium Market Analysis Industry Forecast

European Aluminium’s recommended policies

To address the imbalance, European Aluminium has proposed three policy changes. It wants Article 5b of the proposed regulation amended to make low-carbon aluminium eligible for emission offsets alongside steel. It has also called for the European Commission to establish a harmonised carbon-intensity threshold and methodology for low-carbon aluminium, aligned with standards under the Industrial Accelerator Act and the Ecodesign for Sustainable Products Regulation.

Summing up, the association has sought the proposed 7 per cent cap for material-based flexibilities to cover both low-carbon steel and aluminium, rather than being restricted to steel produced in the EU.

European Aluminium maintains that a material-neutral credit system would allow automakers to select components according to technical and environmental requirements, rather than regulatory incentives. Its central message is that Europe’s automotive decarbonisation framework must put low-carbon steel and aluminium on equal footing.  

Trading aluminium across borders? Find out the exact cost you need to bear for the embedded carbon in the product by using this CBAM calculator.

Grow with
AL Circle

KNOW MORE

Responses

E-magazines

VIEW ALL
Aluminium extrusions

Turn marketplace visibility into more relevant buyer enquiries.

Boost Your Listing

Business Cards

FEATURED

VIEW ALL