
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

The fate of Aluminum Castings’ request to be rezoned to a heavy industrial site will have to wait until July as the council waits on a report from the company regarding its plans to increase production at the existing location. Alderman Peter Schwartzman, Ward 5, had raised concerns during the rezoning ordinance’s first reading over whether an expansion at their facility at 340 S. Kellogg St. would cause harm to local residents and downtown business patrons. He proposed questions to Aluminum Castings President Bret Markum at the council’s June 4 meeting. Because it was only a first reading of the ordinance, Markum was not prepared to respond, so Schwartzman submitted his questions in writing. Among the information Schwartzman is requesting is: emissions reports and information, health...

The most active SHFE aluminum contract started lower at RMB 15,855/mt and settled down RMB 5/mt or 0.03% at RMB 15,865/mt. It met strong resistance at the 5-day moving average and was pressured by the losses in Shanghai Composite Index. Transacted contracts added 4,440 lots to 6,686 lots and total positions climbed to 100,246 lots. Pressure is still coming from the news side. Investors are waiting for a direction in the face of negative news from the Euro zone and the coming Greek election. Spot aluminum traded at RMB 15,870-15,890/mt in Shanghai, with low-iron aluminum trading at RMB 15,950-15,970/mt. Mainstream traded prices in Hangzhou were RMB 15,880-15,890/mt and were RMB 15,870-15,890/mt in Wuxi. SHFE aluminum prices stared lower and met strong resistance at the 5-day moving...

Italian and Spanish debt yields climbed. Greek stocks prices jumped before the Greek election. US CPI and employment data disappointed, dragging the US dollar index below 82. LME aluminum opened at USD 1,960/mt during Asian trading and climbed slightly, shortly breaking through the 5-day moving average and fell back. It settled down USD 6.5/mt or 0.33% at the 2-year low USD 1,953.5/mt. Transacted contracts increased a slight 1,978 lots to 8,929 lots. Total positions dropped 3,518 lots to 734,822 lots. LME aluminum stocks surged 25,800 mt overnight to 4,860,925 mt. LME aluminum opened slightly higher this morning and SHFE aluminum is expected to see a slight rebound and stay within ranges. The Greek election is near. Surging Greek stocks prices overnight also boosted confidence in European...

South Korea has bought a total of 3,000 tonnes of aluminium via tenders for arrival by August 31, the state-run Public Procurement Service said on its website (www.g2b.go.kr). The country also reissued a tender to buy 500 tonnes of lead for arrival by September 18, after passing on the tender on June 12, a company source said. The reissued tender for lead of minimum 99.99 percent purity will close at 4 p.m. (0700 GMT) on June 18. The product should be from London Metal Exchange (LME) registered brands and arrive at the port of Incheon. Details of the aluminium purchases are as follows: TONNE SUPPLIER PREMIUM(CIF/T) 2,000 LG International Corp $210 1,000 Glencore International AG $230 *Note: The above premiums are over LME prices.

Orbite Aluminae of Montreal has begun construction of its high purity alumina (HPA) production plant in Cap-Chat. The company has successfully run a pilot plant at the site, and now it will spend between $26 million and $30 million to bring the plant up to commercial capacity. The original production plant was to have a capacity of 1 t/d, but the company said it is confident that the plant will operate at 3 t/d within 12 months of its commissioning without further significant capital expenditures. Orbite is quick to acknowledge the expertise of suppliers who are part of the team seeing the project through to completion. Gastier, the general contractor, has promised plant commissioning later this year. Canam Group is in charge of the design and construction of the new building. Outotec is...

Recently, Deng Nanfang who is the vice president of Hunan SNTO Group said at ALUMINUM CHINA 2012 that the group was planned to invest 1 billion yuan to build an aluminum industrial park in Hunan in 2013, but not revealed the exact address. This industrial park was expected to produce 50-100 sets of aluminum vans and passenger cars per year, the annual sales revenue was expected to hit 100 billion yuan. SNTO Group now was in the production of 30 thousand tons of industrial profiles, at the end of this year the production may expand to 80 thousand tons.

Senior vice president and chief commercial strategist at Novelis, Erwin Mayr always delivers a thought-provoking and well-put-together presentation, and at this year’s Harbor Aluminum Outlook conference, he focused his sights on light-weighting in the auto industry with aluminum — depending on whom you talk to, a boon for the aluminum’s flat rolled products (FRP) market. Obvious to most, the driver — pun, again, intended — behind light-weighting globally is reducing CO2 emissions. Indeed, Mayr supported his case with some light math — with new CAFE standards to take effect in 2025 of 54.5 mpg, that means CO2 must get reduced to just over 100 grams per mile. He took us through the usual-suspect bullet points on which parts of the automobile are subject to and would benefit from aluminum...

Refrigeration product design and services company United Aluminium has launched its first group website. The site encompasses information about display-system specialist Unibox, innovative LED lighting company Lumenal, expert temperature control division UA Refrigeration & Environmental, and established aluminium extrusion division UA Extrusions, Engineering & Fabrication. Along with contact details, client testimonials, and careers information, the website charts the strategic growth of United Aluminium. The company, which today employs 54 people in a self-contained factory and office space in Manchester, started life as a partnership trading bespoke aluminium extrusions from a shared desk space in Wilmslow in 1990. United Aluminum managing director, Nick Wraith, comments: “Over the past...

Below are the three companies in the Aluminum industry with the lowest price to earnings to growth (PEG) ratios. PEG is valuable in assessing the tradeoff between the price of a stock and expected growth. Generally, the lower the PEG, the better. Kaiser Aluminum (NASDAQ:KALU) is lowest with a PEG ratio of 0.77. Kaiser Aluminum Corporation produces alumina, primary aluminum, and fabricated aluminum products. The Company also supplies alumina and primary aluminum in domestic and international markets. There is potential upside of 31.5% for shares of Kaiser Aluminum based on a current price of $47.90 and an average consensus analyst price target of $63.00. The stock should find initial resistance at its 200-day moving average (MA) of $48.02 and further resistance at its 50-day MA of $49.53....

The global push to improve fuel efficiency in vehicle fleets will more than double the demand for aluminum in the auto market by 2025, Alcoa's director of automotive marketing said Wednesday. Car makers from BMW to Audi have already started to react to the so-called Corporate Average Fuel Economy (CAFE) standards and are beginning to move away from heavier steel body frames to lighter-weight material in what should be the "next frontier" for the aluminum industry, Randall Scheps told delegates at the American Metal Market's Aluminum Summit in New York. "We have every car maker calling us, wanting to increase their aluminum content, wanting to start new R&D (research and development) projects about how they can convert bodies from steel to aluminum, wanting to convert hoods and doors from...

The Tri-Oswego 2012 Triathlon committee and Novelis Oswego Works are asking the community to participate in an aluminum can recycling drive at the Tri-Oswego Triathlon and Novelis Kids’ Fun Run, planned for this Saturday, June 16th in Oswego, New York. Novelis, the presenting sponsor of the Tri-Oswego event, and the world leader in rolled aluminum products and aluminum can recycling, is requesting that participants who will be attending this weekend’s Tri-Oswego, bring 25 aluminum cans to Breitbeck Park. Individuals who bring in the minimum of 25 cans will in turn be entered into a raffle for a new bicycle. According to Tri-Oswego, the aluminum cans should be brought to Breitbeck Park prior to the Novelis Kids’ Fun Run, which is scheduled for 2:00 pm on Saturday. The race is free of...

The most active SHFE aluminum contract for September delivery started at RMB 15,860/mt and settled up RMB 45/mt or 0.28% at RMB 15,900/mt supported by the Shanghai Composite Index’s return above 2,300 points. Transacted contracts were only 2,246 lots and positions added 56 lots to 100,990 lots. The contract succeeded in returning above the 5-day moving average but support has been weak. Investors are expected to await the Greek election result and the most active SHFE aluminum contract will still face heavy pressure at the RMB 15,900/mt mark. Spot aluminum was sold at RMB 15,870-15,900/mt, with low-iron ingots trading at RMB 15,960-15,980/mt. The bottom of SHFE aluminum prices climbed slightly, helping spot aluminum prices consolidate. However, supply remained excessive, posing heavy...

Soft US economic data dragged the US dollar index down to 82. LME base metals stayed within narrow bands, however, as investors were cautiously waiting for the Greek election result. LME aluminum opened at USD 1,975/mt and settled down USD 10/mt or 0.51% at USD 1,960/mt. Both transactions and positions dropped. Cancelled LME aluminum warrants were 1,708,700 mt or 35.34% of total stocks. Latest LME aluminum stocks were down 13,500 mt at 4,835,125 mt. The euro continued to weaken against the US dollar following another downgrade on Spanish debt. The US dollar index slipped due to weak economic data, but also found strong support at 82. LME aluminum prices are expected to stay near USD 1,960/mt before the Greek election is completed. The most active SHFE aluminum contract is expected to open...

Karen Gorrell, a leader and representative for Century Aluminum retirees, expressed new concerns about a continuing lack of health-care benefits in a letter she sent to Sens. Jay Rockefeller and Joe Manchin, both D-W.Va., Gov. Earl Ray Tomblin and Century President Michael A. Bless. Gorrell, whose husband is a Century Aluminum retiree, released her letter on Tuesday. She focused on the May 11 announcement by West Virginia's Public Service Commission that Century and Appalachian Power had not reached an agreement about lower electricity fees. The PSC will hold hearings about the agreement in late July, but is unlikely to make any decision about the Century/Appalachian Power agreement until September. Susan Small, communications director for the PSC, said on Tuesday, "There is not anything...

Aluminum demand in Japan, Asia’s largest importer, may be flat this year, failing to recover from the lowest level since 2009, as the end of a government subsidy will hurt auto sales, a Showa Denko K.K. (4004) executive said. Demand will probably stay weak after dropping to 2 million metric tons last fiscal year, said Shunichi Shiraishi, executive officer for the aluminum sector, who is also the chairman of the Japan Aluminium Association. In March, the group forecast demand growth of 2.8 percent for this fiscal year. Shipments to domestic and overseas markets of rolled- aluminum products expanded 1.1 percent in the first four months, according to the association, as demand from the auto industry was offset by a contraction in sales to electronics makers. Panasonic Corp. (6752) and Sony...

Presentations at the Harbor Aluminum Outlook conference tend to lean towards technical forecasts for aluminum price, inventory levels, and production costs for aluminum. However, equally important are glances at the bigger macroeconomic picture. And this year, the European debt crisis takes center stage, just over China’s growth declines, and Ed Meir of INTL FCStone, a fixture in the metals analysis world, homed in on Greece, Italy and Spain, and what the US dollar can tell us about where aluminum prices — indeed, all commodity prices — are headed. As Meir showed, the value of the dollar is inversely correlated with commodity prices. When the dollar increases, there is a decline in commodity prices, according to a graphic comparison between the dollar rate and the Jefferies CRB Index....

The Aditya Birla Group is in talks with American thermal coal miner Drummond Company to purchase a significant stake in coal mines in Colombia owned by the privately held company. The Kumar Mangalam Birla-promoted group wants to strengthen its mining business and utilise the coal for its captive power plants to make aluminium in India, a person with direct knowledge of the development said. “The group is looking to own rights of anywhere between 20% and 40% of the coal produced in these mines and this may need an investment of $1 billion,” the person said. “The ownership will also help the group hedge itself against price volatility in the global coal market.” “We do not comment on market speculation,” Tuhin Mukherjee, managing director, Aditya Birla Natural Resources, said. “Indian power...

It's hardly a household name but Tomago Aluminium is New South Wales' biggest power user. It needs the same amount of electricity as one million homes. The Federal Government's new carbon tax will affect the company on two fronts: directly, as one of Australia's 500 biggest polluters, and indirectly because its thirst for electricity means it'll be hit hard by power price increases. AM's Adam Harvey visited the company's site near Newcastle. ADAM HARVEY: In a vast storage yard a few kilometres outside Newcastle, Tomago Aluminium's finished products sit like pieces of an oversized Lego kit - shiny ingots, hefty rectangular blocks bigger than fridges, and silver cylinders the size of tree trunks. JOHN LEMBERG: These extrusion pellets get extruded out into shapes that might form yacht masts...