
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

Heavy metal might not be a big part of the musical stylings at this year's Capital EX, but a new touring show will bring the metal to the Edmonton Expo Centre. Northlands announced Thursday that The Aluminum Show, featuring costumes and props made out of recovered materials from industrial factories, will be the 2012 festival's feature show. The international touring show that fuses dance, humour and visual theatre will run three times daily during its first appearance in Canada. The Israel-based group made its debut in Jerusalem in 2003. "It's something different that nobody's seen before," Northlands spokesperson Jennifer Sheehan said during the announcement at Montrose Elementary school. Montrose students built two art pieces that will likely be used in the show. Students presented an...

Demand for aluminium in the auto industry is expected to more than double by 2025 as manufacturers seek lightweight alternatives to steel in an effort to meet ever tightening fuel efficiency regulations. Reuters reports that more and more auto makers are beginning the transition away from heavy steel components and moving toward an increased use of aluminium according to the world’s leading producer of primary and fabricated aluminium, Alcoa, whose director of automotive marketing, Randall Scheps, spoke to delegates attending the American Metal Market’s Aluminium Summit in New York this week. Scheps said that as markets around the world tighten fuel standards, carmakers are forced to react. “We have every car maker calling us, wanting to increase their aluminium content, wanting to start...

Bloomberg quoted Mr Gerardo Solorio an analyst at Harbor Intelligence said China demand for scrap aluminum will continue to outpace domestic supply, keeping the global market for the metal tight and supporting prices. He said that supply tightness is being exacerbated by growth in the North American automotive industry which is making up for sluggishness in Chinese car production.

The winners of the 2012 Cans for Cash(TM) City Recycling Challenge were announced yesterday by the United States Conference of Mayors and Novelis Inc., the global leader in rolled aluminum products and aluminum can recycling. Established in 2004, Cans for Cash(TM) is a national contest that rewards U.S. cities for recycling aluminum beverage cans. The six winning municipalities were recognized at the 80th Annual Meeting of The United States Conference of Mayors in Orlando, Fla. Combined, cities that participated in the 2012 Challenge collected 114,284,354 aluminum beverage cans during the challenge period. The amount of energy saved by recycling these cans could supply enough energy to power 10,884 U.S. homes for an entire day. Grants were made in two categories: Most Cans Collected and...

Fitch Ratings has affirmed aluminium manufacturer China Hongqiao Group Limited's (Hongqiao) Long-Term Foreign and Local Currency Issuer Default Ratings (IDR) at 'BB'. The Outlook is Positive. Fitch has also affirmed Hongqiao's senior unsecured rating at 'BB'. The ratings are currently constrained by uncertainty over long-term alumina supply following the Indonesian bauxite export ban announced in May 2012. As a result, Fitch has not upgraded Hongqiao despite its 2011 performance exceeding the agency's expectations. Hongqiao's main alumina supplier, Gaoxin Aluminium and Power, sources all of its bauxite from Indonesia. Due to regulatory uncertainty in Indonesia which resulted in the May 2012 ban, Hongqiao in Q411 started building in phases its own two million tonnes per annum (mtpa)...

Dropping 0.9 percent on the LME, the cash price of primary aluminum was the biggest mover on June 13, 2012, closing at $1,925 per metric ton. Also on the LME, the 3-month price of aluminum declined 0.8 percent to $1,965 per metric ton. The cash price of primary Indian aluminum changed direction with a 0.5 percent drop. Meanwhile, Chinese aluminum prices were mixed for the day. The cash price of Chinese aluminum closed in the mid-$2,000s per metric ton; following a couple days of improvement, prices fell by 0.9 percent. The price of Chinese aluminum scrap, aluminum billet and aluminum bar saw little movement.

Asian aluminum premiums are expected to continue on their recent upward trajectory during the third quarter of the year due to supply constraints, market participants said Thursday. London Metal Exchange prices are below production costs for many smelters, making further cutbacks likely, and large volumes of metal are moving into long-term financing deals, adding up to tight supply and further increases in premiums, market participants said. Asian premiums have soared this year even as demand remained mostly muted. Third-quarter Japanese contract premiums, an Asian benchmark, settled earlier in June at $200-$210 a metric ton, a sharp increase from $115-127/ton for the second quarter. "I see a lot more upside for premiums during the third quarter," one producer who supplies Asian markets...

Aluminum Corporation of China Ltd., a subsidiary of Chinalco Aluminum Corporation of China (CHALCO), an aluminum exploration company, intends to make a proportional takeover bid to acquire all issued and outstanding shares of SouthGobi Resources Ltd., a coal production and Development Company from Ivanhoe Mines, a mining company. Scope - The report provides a brief of the planned majority acquisition bid to acquire all issued and outstanding shares of SouthGobi Resources Ltd., a coal producing company. - It describes the deal in brie together with a brief explanation of CHALCO's diversification into coal, the latter's shareholding structure, expected benefits to CHALCO and Ivanhoe mines and other Mongolian coal deals. Reasons to buy - Obtain an understanding of the planned majority...

Research and Markets has announced the addition of a report to their offering: “Aluminum Industry in China - Market Opportunities and Entry Strategies, Analyses and Forecasts to 2016: Market Profile” China is the largest producer and consumer of aluminum in the world. China's aluminum consumption grew at a robust during the review period, and is projected to record a growth over the forecast period. Despite the rising aluminum consumption from China's end users, which considerably increased consumption during the review period, the per capita consumption of aluminum is still relatively low in China. China's domestic aluminum supply is expected to marginally exceed demand in 2012, although demand is expected to exceed supply during 2013-2016. Transport is the largest end user of aluminum...

“There’s nothing new under the sun — history is a good way of analyzing the future.” With that, Jorge Vazquez began wrapping up this year’s Harbor Aluminum Outlook conference with his final forecast of the price of aluminum for the year. (If you’d like the exact numbers, check out Harbor’s value proposition — their analysis and forecasting is generally always solid.) However, even Harbor’s forecast from last year was much too bullish for what the market is seeing now — severe undervaluation, with LME prices hovering around $1,950 per ton. The intelligence firm has had to reevaluate, and now doesn’t see prices rebounding for another few quarters at the very least. (For some drivers of the forecast, here’s an earlier post.) The consensus view, according to Vazquez is that most other...

BHP Billiton may have to write $2 billion off the value of its aluminium assets as the global economy struggles, industry experts say. And more writedowns could follow if there is no let-up in the poor conditions buffeting the sector, they say. According to research published by Bank of America analysts, BHP's aluminium business is experiencing "very difficult" conditions. The bank may soon need to cut the value of the unit by $US2 billion ($2.02 billion) in a "worst case" scenario, the analysts say. BHP merged its aluminium and nickel operations last month. In February, rival Rio Tinto wrote almost $US9 billion from the value of its aluminium division. The Bank of America assessment follows reports in Britain that BHP has cut its forecasts for medium term commodity prices. According to...

In a limited activity, tin, brass and select aluminium prices fell at the non-ferrous metal market here today on subdued industrial offtake on the back of bearish London Metal Exchange (LME) advices. Meanwhile, Nickel spurted on renewed demand from alloy industries. Industrial metal were trading sluggish at the LME, on cautiousness ahead of Italian debt option and Greek election this weekend, amidst weak retail sales data from US. Tin dropped by Rs 5 per kg to Rs 1,335 from Wednesday's closing level of Rs 1,340. Brass utensils scrap and brass sheet cutting declined by Rs 3 per kg each to Rs 315 and Rs 324 from Rs 318 and Rs 327. respectively. Aluminium utensils scrap also softened by Re 1 per kg to Rs 113. However, Nickel climbed by Rs 5 per kg to Rs 1,110 from Rs 1,095.

Australian Bauxite Limited announced a Share Purchase Plan (SPP) offering eligible shareholders the opportunity to purchase shares in ABx without brokerage or other related charges. Shareholders can purchase for $0.39 per share, which is the same price paid by brokers and professional investors in the recently completed placement. Participation in the Offer is optional and is open to Eligible Shareholders who were holders of Shares in ABx at 5.00 pm (EST) on 7 June 2012 and whose registered address is in Australia or New Zealand. Shareholders can purchase shares totaling up to $15,000. Funds raised through the SPP will be used to progress the company's drilling and development programs and to provide working capital. Shares issued under the SPP will rank equally with existing shares.

The amount of bauxite shipped out of Ghana in 2011 reduced significantly by 22%, the Ghana Chamber of Mines said in its latest mining sector report released June 6, 2012. The Chamber’s report indicated that 400,069 tonnes were shipped in 2011 down from 512,208 tonnes in 2010. As a result of the decrease, there has been a decline in sales from bauxite exports. “… bauxite shipments reduced significantly by 22% from 512,208 tonnes in 2010 to 400,069 tonnes in 2011 leading to a corresponding decrease in export sales from $15,145,755 in 2010 to $13,406,433 in 2011,” the Chamber’s report said. Meanwhile the export of manganese increased by 53% from 1,193,665 dry tonnes in 2010 to 1,827,692 dry tonnes in 2011, according to the report.

Gujarat Minerals Development Corporation Ltd (GMDC) on Thursday said it has inked a pact of sale of non-plant grade bauxite with a Hyderabad-based company. This would make GMDC earn Rs 20 crore. GMDC, known for its multi-mineral and mining expertise, said it would provide bauxite from its Gadhsisa bauxite mines in Kutch district. After a bidding process, GMDC struck a bulk sale deal to sell 2.35 lakh tonnes (mt) of bauxite with alumina content ranging from 40-52 per cent to the Hyderabad-based Anrak Aluminium Ltd for value addition. Anrak has offered the highest bid of Rs 743 a tonne of bauxite, the GMDC Managing Director, Mr V.S. Gadhvi, said here on Thursday in a statement. This sale will generate about Rs 20 crore for GMDC. It is pertinent to note that in light of GMDC's ongoing...

Recently, the GM of Shandong Yankuang Group attended ALUMINUM CHINA 2012 which was held in Shanghai and said that through acquisition and investment of 90% shares in Western Australia they’ve purchased the bauxite mining right of two companies. This bauxite occupied about 24,000sq.km. ore grade was about 40%-50%, bauxite content was expected to near 1 billion tons. The approved 50,000 thousand tons of aluminium ore were met Australian Standard, nearly 0.18 billion tons still will be approved at the end of this year and will built an alumina base at local place according to the plan. This was the biggest overseas bauxite exploration project that has won the support from Ministry of Land and Resources and Ministry of Finance of the People’s Republic of China, as well as 52,900 thousand yuan...

Chinalco Southwest Aluminium hosted May Economic Analysis meeting on June 13. General Manager Li Fengyi and other company leaders attended the meeting. Southwest Aluminium maintained stable production and management in May. Total Industrial Output Value in May increased by 1.87% on YoY basis. Administrative expense reduced by 18.77% in May on YoY basis. Li pointed that faced by the current tough economy, all the staffs should be confident in overcoming difficulties so as to guarantee the third quarter business performance.

Alcoa (AA) was recognized with two awards for aluminum excellence yesterday at the American Metal Market 2nd Annual Aluminum Summit held in New York. Alcoa was the recipient of an Innovation Award for its next-generation of aluminum-lithium alloys for the aerospace industry. The award was accepted by Eric Roegner, President of Alcoa Forgings and Extrusions, and Mark Vrablec, President of Alcoa Aerospace, Transportation and Industrial Products. Together, Roegner and Vrablec oversee Alcoa businesses serving the aerospace structures and propulsion market. "Aluminum-lithium alloys are winning over composites, titanium and legacy alloys in the aerospace industry," said Roegner. "Customer demand for aluminum-lithium alloys has led to the development of a new state-of-the-art facility next to...