
The global aluminium market is likely to experience a supply crunch through 2028, even as producers prepare to bring additional capacity online. According to Emkay Global Financial Services, an annual deficit of around 400,000 tonnes has been estimated in both 2027 and 2028. Although capacity additions and the smelter restarts by Emirates Global Aluminium (EGA) and Aluminium Bahrain (Alba) in the Middle East, low inventories, rising production costs and supply disruptions are expected to keep aluminium availability constrained. As expectations of improving supply have risen, global aluminium prices have fallen. This quarter has seen an 8.4 per cent decline so far. However, the correction may not be a testament to an improvement in metal availability. London Metal Exchange (LME) aluminium...
Novelis has commissioned a new waste heat recovery system at its Nachterstedt aluminium recycling plant in Germany, with the EUR 2.6 million (USD 2.86 million) investment expected to generate approximately 8.2 million kilowatt-hours (kWh) of electricity annually. The system will convert heat generated during aluminium scrap processing into electricity, potentially meeting around 15 per cent of the facility's annual power demand while avoiding an estimated 3,000 metric tonnes of CO2e emissions each year. The new system captures waste heat produced during decoating, a stage of aluminium recycling in which coatings and other organic materials are removed from scrap before the metal is remelted. Instead of allowing this heat to go unused, the technology converts it into electricity for...
Grow with
AL Circle

Aluminium Corporation of China Limited (CHALCO), a global enterprise in the aluminium industry, has announced robust earnings for the nine months ended September 30 2025, signalling stable progress despite volatile market conditions. The company reported sales of RMB 17.65 billion (approx USD 2.48 billion), up from RMB 17.38 billion (approx. USD 2.44 million) a year earlier. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain Net income of Chalco climbed to RMB 10.872 billion (USD 1.48 billion), compared to RMB 9 billion (USD 1.23 million) in the previous year, reflecting a notable year-on-year improvement in profitability. Basic earnings per share from continuing operations rose to RMB 0.635 (USD 0.087) from RMB 0.525 (USD 0.072), while diluted...

Kaiser Aluminum Corporation has shared plans to issue USD 500 million in senior notes that will mature in 2034. This offering will be conducted through a private transaction, which means it’s exempt from the registration requirements outlined in the Securities Act of 1933, as amended. Issuing of these notes will be backed by all current and future domestic subsidiaries of the firm that act as borrowers or guarantors under the company’s revolving credit facility. The firm is looking to use the money raised from its upcoming senior notes offering, along with funds from its revolving credit line and current cash reserves, to pay off all of its outstanding 4.625 per cent senior notes that are due in 2028. However, the success of the notes offering will depend on the current market conditions....

Tata Motors has shown a solid performance in the third quarter, due to its strong position in the electric vehicle (EV) market and the impressive contributions from Jaguar Land Rover (JLR). Although some domestic sectors have seen a slowdown, the company’s commitment to innovation, operational efficiency and sustainability is driving its growth. Tata Motors’ performance Tata Motors, a major player in India's automotive industry, has just shared its financial results for the third quarter, showcasing a solid performance across its various business divisions. The company's consolidated revenue reached INR 119.5 thousand crore (USD 14.4 billion), reflecting a slight year-on-year growth of 0.4 per cent. Additionally, the company’s EBITDA reached INR 16.7 thousand crore (USD 2.0 billion), due...

Qatar Aluminium Manufacturing Company (QAMCO) reported a strong performance for the third quarter and the nine months ended 30 September 2025, driven by firmer aluminium prices, steady output, and solid market demand. In Q3 2025, the company produced 172 thousand metric tonnes of aluminium, a small but steady rise from 171 thousand metric tonnes in Q2 2025 — roughly a 1 per cent increase. The gain came mainly from stable plant operations and smoother production efficiency. Sales saw a much sharper rise. QAMCO sold 189 thousand metric tonnes in the third quarter, compared with 167 thousand metric tonnes in Q2, marking a 13 per cent increase. The improvement was largely driven by better demand for extrusion ingots, as downstream sectors picked up pace. The company’s share of JV revenue grew...

There’s a neat paradox at the heart of the clean-energy debate: richer societies typically use more energy, yet the latest modelling from the Energy Transitions Commission (ETC) suggests we can (provided that we choose to) have a lot more of the good things that energy delivers (travel, cooling, manufacturing) while using less energy overall. The ETC’s October 2025 briefing argues that smart electrification, appliance efficiency and material recycling could let the global economy more than double by 2050 while cutting final energy demand by about 24 per cent compared with today. Image source: https://en.wikipedia.org/ Also read: High time to invest in Africa’s solar potential! Why? It records the highest ‘sunshine’ on Earth That claim is startling because it rewrites a default storyline:...

Australia’s leading independent architectural aluminium finisher, Australian Aluminium Finishing (AAF), has announced a major upgrade to its aluminium finishing operations. Following the introduction of the latest powder coating technology, the company is now focused on expanding its decorative finish ranges, which are more sustainable for architectural and industrial applications. Latest powder coating technology promises premium finishes AAF has reportedly made a major investment in modernising its powder coating application systems with top-notch equipment to deliver premium-quality aluminium finishes. The upgrades feature high-density powder flow technology, which is typically reserved for vertical lines. Leveraging the same, AAF has adapted it to align with its flexible horizontal...

Egyptalum or Egypt Aluminum, the largest aluminium producer in Egypt and a key player in Africa's industry, has announced a significant 43 per cent drop in net profits for the first quarter of FY2025/26 compared to last year. Net profit According to its most recent financial report, the Egypt-based company has seen a significant drop in net profit after tax, plummeting by 43 per cent year-on-year. In the first quarter of FY2025/26, their profit fell to EGP 2.415 billion (USD 50.7 million), down from EGP 4.232 billion (USD 88.9 million) during the same period last year. Earnings per share The company has announced its basic earnings per share (EPS) for the first quarter of FY2025/26, which stands at EGP 5.86 (USD 0.12). This represents a notable drop compared to EGP 10.26 (USD 0.22) from...

London Metal Exchange (LME) aluminium prices strengthened between October 24 and October 27, supported by steady demand and tightening inventories. On October 27, the LME aluminium cash bid stood at USD 2,878.50 per tonne, up USD 26 from USD 2,852.50 on October 24. The cash offer also rose USD 26, to USD 2,879 per tonne from USD 2,853 earlier. Similarly, the 3-month bid price climbed USD 25.50 to USD 2,876.50 per tonne, while the 3-month offer increased USD 25 to USD 2,877 per tonne. The December 26 contract also recorded gains, with the bid price rising USD 31 to USD 2,898 per tonne and the offer advancing USD 31 to USD 2,903 per tonne. The LME aluminium 3-month Asian Reference Price was reported at USD 2,874.50 per tonne on October 27. On the inventory front, the LME aluminium opening...

Tournaire, a French aluminium packaging solution provider, has unveiled its new Omni Plus aluminium bottle range. The launch sets a new benchmark for sustainable packaging as it combines strength with sustainability. Each bottle features a mono-bloc aluminium construction, extruded from a single piece of metal. Tournaire says the design eliminates weak points found in material joints. It also provides better protection against leaks, cracks and contamination. The Omni Plus bottles are 7 per cent lighter than conventional versions, thanks to a precision deep-drawing process that micro-adjusts wall thickness to achieve what the company calls the perfect balance between strength and weight. The closure system also supports easy dismantling after use, allowing the collar, cap and body to...

Odisha's Chief Minister Mohan Charan Majhi met with Vedanta Group Chairman Anil Agarwal on Thursday to lay out a strategic investment plan aimed at boosting the state's industrial and economic growth. Their discussion centred on how Vedanta's ambitious development projects can align with the Prime Minister's vision of "Viksit Odisha for Viksit Bharat." October 2024: Vedanta's assurance to the Odisha government The company is to invest around INR 1 lakh crore (USD 12.05 billion) in Odisha. This investment will fund the establishment of a 6 million tonnes per annum alumina refinery and a 3 million tonnes per annum aluminium smelting and production plant. These projects will harness renewable energy sources, aim to create approximately 2 lakh jobs and foster a robust ecosystem of MSMEs,...

China’s manufacturing industry, which has been the world’s largest for fifteen consecutive years, appears to be sputtering in 2025, weighed down by global trade tensions and waning domestic demand. Yet amid the broader industrial slowdown, one segment has quietly kept the aluminium sector afloat and that is the country’s resilient automobile industry. Manufacturing momentum falters Accounting for nearly 30 per cent of global manufacturing value and 26 per cent of the domestic GDP, China’s manufacturing sector has long been the backbone of the nation’s economy. However, since early 2025, signs of fatigue have been unmistakable. The Purchasing Manager’s index (PMI) – a key gauge of industrial activity - started the year in contraction, standing at 49.1 in January, according to the data...

In Bali, a small team of craftsmen is doing what many would think impossible — rebuilding some of history’s most iconic cars without ever seeing the originals in person. Image for representational purpose Known as Tuksedo Studio, these artisans remake classic Aston Martins, Toyotas, and Mercedes-Benzes entirely out of aluminium, and their precision is so extraordinary that the replicas could pass for genuine 1960s classics. Because Indonesia bans the import of luxury cars like the Aston Martin DB5, they chose a different path: if you can’t buy one, build one. That belief fuels their workshop — a place where patience, skill, and imagination turn into metal masterpieces. Each car begins from simple internet photos. From those, the team builds wooden frames, bends wire skeletons, and then...

Ardagh Metal Packaging S.A. (AMP) reported a firm third-quarter performance, backed by higher sales, better profitability, and improved efficiency across its regional operations. The company also raised its full-year guidance on the back of steady demand for beverage cans and disciplined cost management. For the three months ended September 30, 2025, AMP’s revenue rose to USD 1.43 billion, up from USD 1.31 billion a year earlier — an increase of 9 per cent, or 6 per cent on a constant currency basis. The improvement was largely supported by higher shipments in Europe and North America, along with a healthier mix of products that cushioned softer sales elsewhere. Net profit for the quarter came in at USD 27 million, compared with USD 18 million last year. Adjusted EBITDA rose 6 per cent to...

One of the major shareholders in the Tomago aluminium smelter, situated north of Sydney, has decided to write down the value of its investment in the facility to zero. This move raises serious concerns about the smelter's long-term viability as the largest single consumer of electricity in Australia's national grid. The future of the smelter is looking increasingly challenging, especially with rising energy costs and ongoing market uncertainties. Hydro's share in the Tomago aluminium smelter Norsk Hydro, which employs more than 1000 people, with the majority ownership held by Rio Tinto, has informed its investors about its challenging situation in finding renewable power which is affordable, indicating uncertainty in the near future concerning the plant. The firm owns a 12.4 per cent...

Alireza Jaanabadi, the Managing Director of an Iranian nanotechnology company, unveiled a significant step forward in welding material technology, copper–alumina nanocomposite tips designed to replace conventional copper alloys in resistance welding. Image for representational purposes only Explore- Most accurate data to drive business decisions with 50+ reports across the value chain Jaanabadi stated that the nanocomposite structure used in the product has been able to provide a more stable and resistant alternative to conventional alloys in resistance welding . He explained that one of the biggest challenges in traditional copper alloys is their loss of strength at elevated temperatures. The softening of the crystal structure often limits electrode performance in high-heat industrial...

After the unfortunate fire incident in its Oswego aluminium plant, the renowned aluminium producer Novelis experienced a massive production setback. However, the aluminium producer, Novelis, now expects to restart operations in the same facility before the end of 2025, which is several months earlier than originally anticipated. Image source: https://images.wsj.net/ Explore- Most accurate data to drive business decisions with 50+ reports across the value chain The company had initially warned that the outage could continue into the first quarter of 2026. However, Chief Executive Steve Fisher said repair work had progressed faster than expected, and teams on site were now working extended hours to complete the rebuild by December. “We have a lot of confidence in that,” Fisher said in a...

Evonik has launched Alu5, the business’s first fumed alumina manufacturing plant in Yokkaichi, Japan. It is a remarkable step forward for the company’s expansion across Asia, strengthening its ability to deliver high-quality aluminium oxide solutions for a wide range of industrial applications. The facility, backed by a bulky investment, highlights Evonik’s ongoing commitment to innovation, dependable supply chains, environmental responsibility, and closer collaboration with customers throughout the region. Image source: https://thebamabuzz.com/ Explore- Most accurate data to drive business decisions with 50+ reports across the value chain Strengthening access to advanced aluminium oxide products In the words of Emmanuel Auer, Head of Evonik’s Smart Effects business line, “The launch of...

Reginald Thorpe, a veteran safety expert in Jamaica’s bauxite industry, has been honoured for 37 years of service. Losing his mother and grandfather at six, the Clarendon native overcame early adversity. Moving to Brown’s Town, St. Ann, he attended Brown’s Town Secondary School and later pursued agriculture at Brown’s Town Community College. Image source: https://jis.gov.jm/ Explore- Most accurate data to drive business decisions with 50+ reports across the value chain “I must say categorically, I am, indeed, first of all thankful to God because I am a firm believer in God. Secondly, I am humbled by the fact that the Government can recognise the contribution that I have given over these years. For me to be singled out to receive this award, I am very much honoured. I am very grateful, and...