
The global aluminium market is likely to experience a supply crunch through 2028, even as producers prepare to bring additional capacity online. According to Emkay Global Financial Services, an annual deficit of around 400,000 tonnes has been estimated in both 2027 and 2028. Although capacity additions and the smelter restarts by Emirates Global Aluminium (EGA) and Aluminium Bahrain (Alba) in the Middle East, low inventories, rising production costs and supply disruptions are expected to keep aluminium availability constrained. As expectations of improving supply have risen, global aluminium prices have fallen. This quarter has seen an 8.4 per cent decline so far. However, the correction may not be a testament to an improvement in metal availability. London Metal Exchange (LME) aluminium...
Novelis has commissioned a new waste heat recovery system at its Nachterstedt aluminium recycling plant in Germany, with the EUR 2.6 million (USD 2.86 million) investment expected to generate approximately 8.2 million kilowatt-hours (kWh) of electricity annually. The system will convert heat generated during aluminium scrap processing into electricity, potentially meeting around 15 per cent of the facility's annual power demand while avoiding an estimated 3,000 metric tonnes of CO2e emissions each year. The new system captures waste heat produced during decoating, a stage of aluminium recycling in which coatings and other organic materials are removed from scrap before the metal is remelted. Instead of allowing this heat to go unused, the technology converts it into electricity for...
Grow with
AL Circle

ICICI Securities has reiterated its Hold rating on National Aluminium Company (NALCO), assigning a target price of INR 246 (approximately USD 3) per share. This review followed NALCO’s strong financial performance in Q2 FY2026, with EBITDA gaining 29 per cent to INR 19.2 billion (USD 230 million approximately). Explore- Most accurate data to drive business decisions with 50+ reports across the value chain The outperformance was mainly due to a strong jump in alumina sales volumes during the quarter. NALCO expects to sell between 1.25 and 1.28 million tonnes of alumina in FY26 , consistent with its annual guidance. The company’s ongoing refinery expansion, which will add 1 million tonnes per annum (MTPA) of alumina capacity, is expected to be completed in the first quarter of FY27. Once...

Nimba Mining Company, Guinea-Conakry's newly established state-owned enterprise, have sent out its first shipment. The loaded shipment carried 200,000 tonnes of bauxite from the Tinguilinta mine via the Port of Kamsar. The shipment was sent out after the firm signed a 1.5 million tonne agreement back in October 2025. With nearly 400 million tonnes of bauxite deposits, the Tinguilinta mine is deemed to be one of the largest bauxite reserves. This has been advantageous for Nimba Mining Company and is eyeing four major areas in particular. These include the bauxite, refining, mining and gold, all aimed towards creating a robust industrial partnership. Apart from its mining activities, the firm also manages the Kamsar port facilities. The CEO of Nimba Mining Company, Patrice L'Huillier,...

On November 11, LME aluminium prices recorded minor declines across key contracts compared to November 10. The cash bid price stood at USD 2,840 per tonne, down 0.94 per cent from USD 2,867 per tonne a day earlier, while the cash offer slipped 0.92 per cent to USD 2,841 per tonne, compared with USD 2,867.5 per tonne previously. For the 3-month contract, the bid price fell 0.61 per cent to USD 2,865 per tonne from USD 2,882.5 per tonne, and the offer price eased 0.59 per cent to USD 2,866 per tonne, down from USD 2,883 per tonne. The December 26 contract also weakened, with the bid at USD 2,897 per tonne, marking a 0.38 per cent drop from USD 2,908 per tonne, while the offer price decreased to USD 2,867.5 per tonne from USD 2,913 per tonne, representing a decline of 1.56 per cent. In...

The new model of Benelli, TRK 602 X, has taken over the older model TRK 502 by incorporating several improvements, like its performance, design of the chassis and other onboard technology. The new edition includes the aluminium tubular section at the front, accompanied by a lighter rear subframe, which in turn lowers the seat height to 825 mm. TRK 602 X has preserved the spirit of the older model and has made itself to the Milan Motorcycle Show, Italy. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain TRK 602 X has used aluminium in its frame and swingarm to improve the efficiency of the bike by making it more lightweight and stable. This would help to increase the overall durability of the bike, along with its ease of handling by the users....

Scandium Canada has signed a Memorandum of Understanding (MoU) with Gränges Powder Metallurgy (GPM), a global supplier of spray-formed aluminium products and aluminium powders for additive manufacturing. The partnership is aimed at integrating Scandium Canada’s scandium-modified alloys into spray-formed aluminium products and aluminium powders. This move brings the company’s patent-pending materials into one of the fastest-growing areas of aluminium engineering - additive manufacturing. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain Scandium Canada's Chief Science Officer Luc Duchesne emphasised that the firm’s proprietary alloys address the need for “printable, high-strength and lightweight metals in sectors such as aerospace, automotive...

A new £13.5 million (USD 16.74 million) metal recycling sorting facility has been approved for Wrexham Industrial Estate. Hydro Aluminium Deeside sought permission for the facility, which will increase scrap metal sorting and processing capacity to 100,000 tonnes per year. The facility will be located next to their existing aluminium recycling plant. (Image source: Google Street View) The proposed building will cover 2,878 square metres and stand approximately 15.7 metres high, matching the height of the existing facility. The new sorting facility will boost capacity by 30,000 tonnes annually, supporting increased aluminium recycling efforts. While planning officers had no significant concerns, Wrexham County Borough Council’s planning committee chair, Cllr Mike Morris, voiced...

On the evening of November 10, 2025, Aluminium buyers in the US physical market witnessed history unfold as the Midwest Premium surged to an all-time high of USD 1,950.15 per tonne , striking a sharp growth of 2.87 per cent overnight from USD 1,895.72 per tonne. The Midwest Premium, a surcharge on top of the London Metal Exchange (LME) price that reflects local delivery costs, logistics, and regional supply-demand dynamics, has become a direct casualty of US protectionist measures. Analysts attribute the latest spike to the combined effects of steep tariffs and mounting supply chain distortions, which have tightened domestic availability of the metal. Surges over several months However, this hike is not an overnight affair. The rally has been building steadily since the beginning of 2025....

A wave of demand is sweeping through Europe’s aluminium flat-rolled products sector, and this pace of growth is anticipated to reshape the entire market. Flat-roll products (excluding foil) have climbed from 3.95 million tonnes in 2020 to a projected 5.94 million tonnes in 2025. That’s a 50.38 per cent jump in just five years. And this is only the starting point. By 2032, consumption is expected to rise by around 123.3 per cent a surge tied from sustainability targets to changes in manufacturing techniques and the pressure to cut carbon emissions. The plates segment has been following the same upward path. In 2020, it stood at 580 thousand tonnes. By 2025, the figure is expected to reach 856 thousand tonnes — a 47.6 per cent increase. Looking further ahead to 2032, consumption is...

According to studies by the Council on Energy, Environment and Water (CEEW), recovering the metals and materials from abandoned solar panels could generate a circular economy of almost INR 3.7 billion (USD 444 million) by 2047. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain The research states that recycling of key materials such as aluminium, silicon, silver, and copper from old solar modules could meet up to 38 per cent of the raw material demand for India’s solar manufacturing sector. Simultaneously, it could reduce 37 million tonnes of carbon emissions by minimising reliance on virgin inputs. At present, India’s solar recycling industry is still at the developmental stage, with only a few commercial recyclers in operation. The twin CEEW...

Born from the 1992 UNFCCC (United Nations Framework Convention on Climate Change) treaty and signed at the Rio Earth Summit, the COP (Conference of the Parties) completes three decades of climate commitment meetings. The 30 th COP or the ‘2025 United Nations Climate Change Conference’ is being held at the heart of the Amazon (Belem, Brazil) and is currently in progress. Yet, when it comes to evaluating the achievements as opposed to targets or goals, the mass notion is that the majority of the countries have failed to achieve the agenda of the climate meets and only 15 have achieved the deadline set by the latest Paris agreement for 2025 (which was inscribed at the COP21). Let’s explore what is the ground reality of COPs versus aluminium in the past thirty years. Image source:...

India's one of the most prominent players in segments like bauxite, alumina, aluminium and power, National Aluminium Company (NALCO) reported a surge in its stock price by 13 per cent during the intraday trading on November 10, 2025. The rise in the share price comes soon after the firm revealed its Q2 FY26 financial performance. Share price on November 10, 2025 With a market cap of INR 465.95 billion (USD 5.61 billion), NALCO's share on November 10, 2025, closed at INR 257.35 (USD 3.10), showing a sharp increase of 9.46 per cent. Compared with the previous day's close, which recorded INR 234.40 (USD 2.82), the open gap recorded a rise of 2.49 per cent, where on November 9, the share price reached the intraday high of INR 259.65 (USD 3.13). Explore- Most accurate data to drive business...

The decline in output mainly reflected extended calciner suspensions in Hebei and Henan provinces triggered by ongoing air pollution alerts, as well as production adjustments in Shandong province, market sources said. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain In response to air pollution warnings initially scheduled to be lifted at the end of October, two alumina producers in Henan's Luoyang and Hebei's Tangshan each halted two calciners for 3-4 days during the prior week, as reported. When the two cities issued renewed smog alerts on November 3 and 4, the suspensions were extended through last week, further curbing output. In addition, a refiner in Shandong began a three-week maintenance check on one calciner early last week due to...

Indian aluminium producer Hindalco Industries Limited has released its Q2 FY26 performance for the period ending September 30, 2025. With the rising demand for aluminium within the country, the firm is enhancing production capabilities and is also pushing towards green initiatives via renewable energy use. Overall financial snapshot The group of companies (including Novelis) showed a robust performance across all its businesses in Q2 FY26, where the consolidated revenue reached INR 660.58 billion (USD 7.95 billion). It reflected an increase of 13 per cent from INR 5.83 billion (USD 7.01 billion) in Q2 FY25. The business segment EBITDA climbed by 6 per cent year-on-year, amounting to INR 0.91 billion (USD 1.10 billion), up from INR 0.86 billion (USD 1.03 billion) the previous year. Profit...

India’s engineering exporters have raised a fresh concern over widening tariff gaps that are eroding the country’s competitiveness in key Western markets. On November 10 2025, the Engineering Export Promotion Council of India (EEPC India) urged the government to place steel and aluminium products, especially those made by MSMEs, at the centre of ongoing bilateral trade talks with the US. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain Pressure from US Section 232 tariffs EEPC India said the 50 per cent US tariffs under Section 232 have significantly impacted engineering exports, deepening the disadvantage for Indian manufacturers. The tariff gap with global competitors has now widened to an average of 30 per cent, the council noted, warning...

The seventh edition of the Professor Alexander Adum Kwapong Lecture Series, hosted by UNU-INRA in Accra on November 6, brought together policymakers, researchers and industry voices with a single question: what should Africa make of its vast store of critical minerals? Image source:UNU-INRA This year’s theme — “Critical minerals: A new scramble or opportunity for green industrialisation in Africa” — took the discussion beyond geology and into the realm of strategy. Delivering the keynote, Sheila Khama, a Non-Executive Director working with companies listed across FTSE, Nasdaq, Saudi Stock Exchange and AXS, challenged the continent to shift its long-held perspective on raw materials. She walked the audience through the importance of cobalt, lithium, graphite, platinum and bauxite in...

The week opened with the London Metal Exchange (LME) aluminium prices moving upward and the inventories contracting. The LME cash bid rose by USD 27 per tonne or 0.95 per cent to finally settle at USD 2,867 per tonne, up from USD 2,840 per tonne. Concurrently, the LME cash bid rose by USD 26.5 per tonne or 0.93 per cent, reaching USD 2,867.5 per tonne, up from USD 2,841 per tonne. Both the 3-month bid and offer rose by USD 31.5 per tonne or 1.1 per cent and each adjudicated at USD 2,882.5 per tonne and USD 2,883 per tonne, up from USD 2,851 per tonne and USD 2,851.5 per tonne, respectively. A similar trend had been seen at the LME forward contracts when the December 26 bid and offer significantly rose by USD 30 per tonne or 1 per cent. December 26 bid settled rose from USD 2,878 per tonne...

Recently, Maan Aluminium has announced plans to accumulate INR 8.319 billion (USD 100 million approx.) through a preferential allotment of 5.9 million equity shares, priced at INR 141 (USD 1.70 approx) per share. The proposal will be discussed for shareholders’ approval at an Extraordinary General Meeting (EGM) scheduled for 29 November 2025. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain According to the company, the capital will be channelled towards key growth initiatives. Around INR 4 billion will go into aluminium extrusion projects aimed at expanding manufacturing capacity and modernising existing infrastructure. Additionally, an INR 2.8 billion (USD 33.73 million approx.) will be allocated towards capital requirements, while INR...

Global beverage firm Coca-Cola Europacific Partners (CCEP) Australia has initiated the introduction of reverse vending machines (RVMs) at its major manufacturing sites, like Moorabbin in Victoria. The unit is located within the Moorabbin facility, close to where bottles and cans are produced, effectively closing the loop on-site. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain A reverse vending machine collects empty plastic, aluminium cans, and glass bottles. These items are then directed into the recycling stream. Users typically receive deposit refunds, vouchers, or other rewards, a model that has already proven effective globally. Partnership with Return-It strengthens CDS Vic The trial is being run with Return-It, the eastern zone...