Calculate Embedded Emissions for Unwrought Aluminium (HS7601)

Enter your input

Payable emissions (tCO₂e/t)

Total CBAM Cost (€)

Notes:
There may be a difference when calculating the price with respect to import volume, carbon price, and benchmark emissions, as the embedded formula may result in minor variations due to decimal rounding. Therefore, the actual value may vary.

CBAM is applicable to trade volumes starting from 50 metric tonnes. For trade volumes below 50 metric tonnes, CBAM does not apply.

Usage Procedure – How to use the CBAM Calculator Sheet

Enter or update values only in the INPUT
PARAMETERS section (Highlighted in blue) , including
the carbon price, benchmark emissions, CBAM
chargeable percentage (as per the phase-in year),
and imported quantity.

The system will automatically calculate the payable
emissions and the total CBAM cost (€) based on the
inputs provided.

Notes:
• Change any input value to automatically update CBAM cost.
• Formula used: Carbon price × payable emissions × quantity.
• Model aligned with CBAM supplier-side illustrative methodology.

08 MAY 2019 AL CIRCLE

Shanxi Chinalco Huarun to commission 52 electrolytic baths for more aluminium alloy production

EDITED BY : DEBANJALI SENGUPTA 1MINS READ

According to an update from Shanghai Metals Market, Shanxi Chinalco Huarun is set to commission 52 more electrolytic baths, in a bid to reach to full production of its phase-one aluminium alloy project.

{alcircleadd}

As per the report, Shanxi Chinalco Huarun intends to achieve this by mid to late June. Previously, April 22, it had put 40 electrolytic baths into use, learned SMM further.

The commissioning of 52 more electrolytic baths will bring the total number to 92, with a capacity totalling at 125,000 tonnes. Till August 31, the project will enjoy a preferential electricity price of RMB 0.286 per kWh. Nonetheless, from September the prices will not be higher than RMB 0.3 per kWh.

SMM learned there is more capacity in the pipeline, with construction likely to complete by the end of this year.

The phase-one project, designed with an annual capacity of 430,000 tonnes aluminium alloy, had started in May 2018 and operated under one-fourth of the capacity.

Tagged with: