Calculate Embedded Emissions for Unwrought Aluminium (HS7601)

Enter your input

Payable emissions (tCO₂e/t)

Total CBAM Cost (€)

Notes:
There may be a difference when calculating the price with respect to import volume, carbon price, and benchmark emissions, as the embedded formula may result in minor variations due to decimal rounding. Therefore, the actual value may vary.

CBAM is applicable to trade volumes starting from 50 metric tonnes. For trade volumes below 50 metric tonnes, CBAM does not apply.

Usage Procedure – How to use the CBAM Calculator Sheet

Enter or update values only in the INPUT
PARAMETERS section (Highlighted in blue) , including
the carbon price, benchmark emissions, CBAM
chargeable percentage (as per the phase-in year),
and imported quantity.

The system will automatically calculate the payable
emissions and the total CBAM cost (€) based on the
inputs provided.

Notes:
• Change any input value to automatically update CBAM cost.
• Formula used: Carbon price × payable emissions × quantity.
• Model aligned with CBAM supplier-side illustrative methodology.

23 OCTOBER 2018 AL CIRCLE

Primary aluminium production in North America slightly up in September; semi-finished shipments drop

EDITED BY : BEETHIKA BISWAS 2MINS READ

The Aluminum Association, in cooperation with the Aluminium Association of Canada, reported primary aluminium production in North America (U.S. and Canada) was at an annual rate of 3.83 million tonnes during September 2018, advancing 11,272 tpy (+0.3%) over the August 2018 rate of 3.82 million tonnes.

The production rate in the U.S. was up 4.4 per cent m/m, while the Canadian rate fell 1.0 per cent. On a YoY comparison, the North American annual rate was down 2.8 per cent from September 2017. Actual production in September 2018 totalled 314,921 tonnes.

{alcircleadd}

According to the Association, net new orders of aluminium mill products or semi-finished products for September 2018 dropped 9.6 per cent from August 2018. Orders for flat roll products (sheet, plate, can stock and foil) were off 8.3 per cent, while orders for extruded products decreased 17.1 per cent and orders for redraw rod rose 7.1 per cent. YoY the orders dropped slightly from September 2017. Domestic orders were up 4.2 per cent through September over YTD 2017.

Shipments of can stock by domestic producers were off 2.6 per cent YoY to 314.2 million pounds during September 2018. Month on month, shipments decreased 7.2 per cent from the August 2018 total of 338.5 million pounds. YTD shipments through September 2018 dropped 1.6 per cent to 1.37 million tonnes from YTD 2017. Compared to September 2017, domestic shipments of can stock to U.S. markets rose slightly while exports decreased 19.9 per cent.

Estimated net shipments of Aluminum Sheet and Plate by U.S. and Canadian producers increased 6.2 per cent YoY to 741.4 million pounds during September 2018. Compared to the previous month, shipments decreased 4.8 per cent from the August 2018 revised total of 778.4 million pounds. YTD shipments through September 2018 were up 3.1 per cent to 3 million tonnes from the same period of 2017.

Tagged with: