Calculate Embedded Emissions for Unwrought Aluminium (HS7601)

Enter your input

Payable emissions (tCO₂e/t)

Total CBAM Cost (€)

Notes:
There may be a difference when calculating the price with respect to import volume, carbon price, and benchmark emissions, as the embedded formula may result in minor variations due to decimal rounding. Therefore, the actual value may vary.

CBAM is applicable to trade volumes starting from 50 metric tonnes. For trade volumes below 50 metric tonnes, CBAM does not apply.

Usage Procedure – How to use the CBAM Calculator Sheet

Enter or update values only in the INPUT
PARAMETERS section (Highlighted in blue) , including
the carbon price, benchmark emissions, CBAM
chargeable percentage (as per the phase-in year),
and imported quantity.

The system will automatically calculate the payable
emissions and the total CBAM cost (€) based on the
inputs provided.

Notes:
• Change any input value to automatically update CBAM cost.
• Formula used: Carbon price × payable emissions × quantity.
• Model aligned with CBAM supplier-side illustrative methodology.

26 NOVEMBER 2021 AL CIRCLE

Greek aluminium extrusion company Elvial procures a second furnace from Nitrex

EDITED BY : RUPANKAR MAJUMDER 1MINS READ

The globally leading provider of fully integrated heat-treating solutions and technologies, NITREX METAL’s emphasis on quality and customer satisfaction sustains to pay off, as ELVIAL S.A., one of the largest aluminium extrusion companies in Greece has procured a second NX-815 E furnace from NITREX to fulfil the demands which are developed following its plant expansion and scaling production capacity.

Elvial procures a second furnace from Nitrex

{alcircleadd}

Marcin Stokłosa, Project Manager at Nitrex said: “This additional NX-815 E furnace, which was installed and began production in July 2021, will help increase the production of building materials by the company, while the first furnace has been operational since 2016”.

However, according to Marcin Stokłosa, an ELVIAL representative cited good equipment, technology and service to explain why ELVIAL chose to do business with NITREX once again.

Global Aluminium Foundry

The NX-815 E is a retort furnace used for extrusion. It operates with NX Connect software and uses the NITREG®-C (nitrocarburizing) and NITREG® (gas nitriding) technologies for extrusion dies. The machine is equipped with air conditioning, an INS series exhaust gas neutralizer and a racking of 750 kg made from Inconel 600. The order also included a lifting device and all processes for this furnace are compliant with AMS 2759/10.

Tagged with: