Alumil India, the fully-owned Indian subsidiary of Alumil Group, has successfully delivered advanced fenestration solutions for NICMAR University in Pune, transforming a precast campus vision into a functional, durable and future facing learning environment. The project required approximately three hundred windows within a tight timeline which was successfully delivered by Alumil India. The project deployed Alumil’s top-hung window systems combined with sleek mullions and glazing. “NICMAR University presented an opportunity to demonstrate how fenestration can become an integral part of both a building’s architecture and its performance. The project required us to respond to large openings, intensive daily usage, acoustic and weather considerations, safety, and the specific challenges of...
Anshika Jain resigned as Company Secretary and Compliance Officer of Golkonda Aluminium Extrusions Ltd. on October 24, 2026, citing personal reasons. The company informed the Bombay Stock Exchange about her resignation under Regulation 30 of the SEBI Listing Obligations and Disclosure Requirements Regulations, 2015. To know the global production, demand and consumption forecasts of aluminium extrusions, explore our report " The World of Aluminium Extrusions to 2035 " In her letter, Jain said there were no other reasons for her resignation beyond the personal reasons mentioned. She also asked the Board to accept her resignation and complete the required formalities under the Companies Act, 2013. Managing Director Geeta Sethi signed the disclosure on behalf of the company’s Board. The...
Grow with
AL Circle
Crucial Engineering a Bradford-based company specialising in aluminium doors and security access systems has bagged a £250,000 loan from NPIF II – Mercia Debt Finance, a part of the Northern Powerhouse Investment Fund II (NPIF II), to fuel its growth. The funding will empower Crucial Engineering to take on larger projects, building on its recent expansion into bigger premises and a series of high-profile contract wins. Image Source: Crucial Engineering website The £660m Northern Powerhouse Investment Fund II (NPIF II) supports businesses across the North of England, offering loans from £25,000 to £2 million and equity investments of up to £5 million. Its mission is to drive sustainable economic growth by fostering innovation and creating local opportunities for startups and scaling...
Maan Aluminium Limited, a manufacturer and trader of aluminium profiles, has reached a new 52-week low, signalling industry volatility and underperformance. Performing below average in the aluminium sector by 3.63 per cent, Maan’s stock price has hit as low as INR 85.2 (US$0.98). Maan’s stock has been trending down consistently since February 25, when the price stood at INR 97.50 (US$1.12). After a brief holiday on February 26, the stock price on February 27 decreased to INR 92.74 (US$1.06) and dropped below INR 90, reaching INR 89.56 (US$1.03) on February 28. Thus, Maan Aluminium’s stock price has plunged by 12.6 per cent since February 25. The company’s performance over the past year has been challenging, seeing a decline of 41.2 per cent, representing a striking contrast with the...
On February 27, 2025, Press Metal Aluminium Holdings Berhad announced the signing of a Memorandum of Understanding (MoU) with Bintulu Development Authority (BDA) to build an aluminium solar frame manufacturing facility with an annual production capacity of 80,000 tonnes. Under the JV signed, the two parties have agreed to form a cooperative framework to conduct commercial viability, feasibility, and necessary terms for the successful implementation of the project. Effective from the date signed, the MoU will remain in force and effect for a valid term of three months unless the parties terminate the agreement early. The facility is proposed to be located in Bintulu, Malaysia, and is estimated to require an investment of RM600 million. Initially, 20 per cent of the capital needed for the...
Aluminium wire rods may not grab headlines daily, but they are the silent workhorses powering everything from the lights in our homes to the vehicles on the road. These cylindrical rods, celebrated for their high conductivity, strength, and adaptability, are vital to electrical transmission systems, building infrastructure, and manufacturing processes. What makes aluminium wire rods so special? Their excellent conductivity and lightweight properties make them the go-to choice for cable production, overhead power lines, and electrical wiring. Beyond the electrical world, their corrosion resistance and recyclability make them indispensable in the automotive, aerospace, and industrial sectors—helping companies meet their sustainability goals by offering energy-efficient, lightweight...
Jaguar Land Rover (JLR), in collaboration with Novelis, has successfully completed large-scale trials of a pioneering aluminium skin alloy. This innovative material contains up to 85 per cent recycled content and offers up to 95 per cent greater energy efficiency in production compared to conventional methods. Image Source: JLR website New milestone unlocked The development of the new aluminium skin alloy marks another milestone in JLR’s enduring partnership with aluminium recycling leader Novelis. Their collaboration dates back to 2008 with the launch of the REALCAR project — Europe’s first closed-loop recycling system. This initiative enables aluminium scrap from vehicle production to be collected, recycled by Novelis, and reused in new car bodies, significantly reducing reliance on...
India and the UK have resumed negotiations for a free-trade agreement (FTA) after an eight-month break on Monday, February 24, with the two sides of the table focussing on a triple hike in bilateral trade with a ‘mutually beneficial and forward-looking’ deal by going past tariff and non-tariff issues while protecting each other’s ‘sensitivities’. The statement of affirmation was mutually declared by India’s commerce minister, Piyush Goyal, and UK Secretary of State for Business and Trade, Jonathan Reynolds. The Bilateral Trade Agreement sessions between the United Kingdom and India involve negotiation on 26 tangents, which include goods and services, intellectual property rights, sustainability along with labour rights for both nations. According to the International Monetary Fund...
Scandium Canada, dedicated to advancing strategic metals and gold projects across Québec, has announced its voluntary delisting from the US OTCQB equity market, effective March 1, 2025. This strategic move aims to redirect resources towards establishing a new division dedicated to commercialising the company’s two aluminium-scandium powders. Following a comprehensive review of its primary listings on the TSX Venture Exchange and OTCQB, the company concluded that the costs associated with maintaining a dual listing were not justified at this stage. The savings generated from delisting will be reinvested to support the growth and development of the new division, which was first announced in November 2024. About the upcoming divisions By streamlining its market presence, Scandium Canada...
Constellium, the Paris-based aluminium business, has joined "Project M-LightEn," a bold initiative to create ultra-lightweight, sustainable vehicle chassis structures. Over the next three years, the consortium will work to revolutionise unibody vehicle architecture, targeting a 50 per cent reduction in carbon intensity and a 25 per cent decrease in weight. Image Source: Constellium website Led by the Gordon Murray Group (GMG) and backed by Innovate UK and the Advanced Propulsion Centre (APC), the project brings together Constellium, Carbon ThreeSixty, and Brunel University London. As part of Project M-LightEn, Constellium will provide ultra-high-strength aluminium solutions composed of 80 per cent recycled UK consumer scrap. "Alongside Gordon Murray Automotive's niche supercar...
A Global Trade Research Initiative’s (GTRI’s) flagship report on Friday has put the spotlight on a plethora of possibilities for the Indian Government to tackle US President Donald Trump’s reciprocal tariffs that can potentially hit the Indian trade setup hard enough. One of which has pulled many eyeballs, including the government itself — India can consider a ‘zero-for-zero’ tariff approach, which is practically lowering import duties on select products that it does not import in higher quantities from the US as part of the proposed Bilateral Trade Agreement (BTA). On this note, government officials have revealed to a national media publication that the consideration was in full swing, and discussions commenced with stakeholders in sectors like automobiles and auto components, in which...
Horn has expanded its DM range of polycrystalline diamond (PCD) cutting tools with newly developed mills designed for high-efficiency aluminium machining. These tools feature optimised cutting geometries that enhance chip control, minimise cutting forces, and deliver exceptional surface finishes. Image Source: Horn website With over 30 years of expertise in developing and manufacturing precision tools from ultra-hard cutting materials, Horn provides a comprehensive selection of PCD milling cutters designed for efficient and high-performance aluminium machining. Covering a range from simple end mills to advanced modular combination tools, the latest additions are engineered to address the specific challenges of aluminium machining, ensuring superior performance in chip formation, cutting...
Sundaram-Clayton Ltd (SCL), a leading automotive components manufacturer, announced that its Board of Directors has approved the sale of its aluminium die-casting businesses at the Hosur plant to third-party buyers. The decision was made during a board meeting on Wednesday, February 19. Image Source: SCL website Updates about the transaction As disclosed to stock exchanges, the company will divest both high-pressure and low-pressure aluminium die-casting operations at the Hosur facility. However, key details of the transaction, such as the final deal structure, the identity of the potential buyer, and the sale consideration, remain undetermined. The Chennai-based company, formerly Sundaram-Clayton DCD Limited, informed BSE Limited and the National Stock Exchange of India that it would...
Constellium, the Paris-based aluminium business, has determined to increase a minimum price of USD 0.15 per pound for all flat-rolled products shipped in the US, owing to the recent market conditions and revolving economic drivers. The price increase is to be effective immediately after announcements, as per the contracts’ appropriation. As a result, select products may require higher increases. The global manufacturer of aluminium rolled products, extruded products, and structural parts based on a large variety of advanced alloys counts close to 12,500 employees worldwide and operates more than 28 manufacturing sites in North America, Europe and Asia. It also holds a research and development unit in China. In a recently conducted survey, unforeseen consumer demand, elevated trade...
Officials from the Bureau of Indian Standards (BIS) raided Ibex Engineering Pvt. Ltd. on Monday, sealing the factory for operating illegally for the past two years. The company, engaged in aluminium casting for manufacturing, storing, and selling aluminium cast products, had been operating without the mandatory license introduced in 2023. The officials seized approximately 5,000 unlicensed products produced and stored on-site. BIS had provided a two-year window, requiring companies to obtain the necessary Quality Control Order (QCO) license by December 1, 2024. However, Ibex Engineering failed to comply with the regulations. During a primary inspection conducted by the Bureau of Indian Standards (BIS) in January 2025, it was discovered that the factory was manufacturing products without...
Founded in 2002, China-based Henan Wanda Aluminum, known for specialising in producing and selling aluminium sheets, strips, and foils, was recently recognised as an innovative enterprise for 2024. In collaboration with relevant departments, the Provincial Department of Science and Technology announced the selection of 166 innovative enterprises for 2024. The "Implementation Plan for the Step-by-Step Cultivation of Innovative Enterprises in Henan Province (2024-2026)" outlined the review and selection process for innovative enterprises. Innovative enterprises are defined as those with significant influence and leadership in their respective industries, known for their strong innovation capabilities, extensive industry experience, and promising market prospects. Being selected as one of...
Chinalco Ruimin has successfully passed the re-examination for 'National High-Tech Enterprise' status and has been awarded the national high-tech enterprise certificate. The certificate is jointly issued by the Ministry of Science and Technology, the Ministry of Finance, and the State Taxation Administration of the People's Republic of China. The re-evaluation of national high-tech enterprises has reaffirmed that Chinalco Ruimin meets the highest national standards across multiple key areas like: the accumulation of independent intellectual property in core technologies the establishment of strong R&D teams a high proportion of revenue from high-tech products efficient organizational management operational excellence growth potential ability to transform scientific and technological...
Groundbreaking designs have demonstrated that aluminium components used across various transport modes can be made nearly 50 per cent lighter without sacrificing strength. Coventry-based casting firm Sarginsons Industries has unveiled new designs showcasing a significant breakthrough in automotive lightweighting. However, did you know that the global aluminium castings consumption is on a steady rise and is expected to reflect a 3.36 per cent growth in 2025? To learn more, get your hands on AL Circle's recently curated report, "Global Aluminium Industry Outlook 2025," which provides more information about the industry. About the technology These designs are the initial outcomes of the Performance Integrated Vehicle Optimisation Technology (PIVOT) project, led by Sarginsons in...
Chinalco Shanxi New Materials commissioned the China Nonferrous Metals Industry Association to assess two key achievements: the "Comprehensive Utilisation and Industrial Application of Secondary Aluminum Ash in Clinker Kiln Resources" and the "R&D and Application of an Automated Aluminum Bar Cutting Device." Image Source: MDPI After reviewing technical reports, examining data, and engaging in discussions, the expert panel concluded that both projects have achieved an internationally leading level of scientific and technological advancement. The project on the comprehensive utilisation and industrial application of secondary aluminium ash in clinker kilns has successfully developed innovative technologies and processes for the collaborative resource utilisation of secondary aluminium ash...
Novelis Inc., the international arm of Hindalco Industries Limited and the world leader in aluminium rolling and recycling, has announced its third-quarter results demonstrating a further downfall in financial performance. According to Steve Fisher, president and CEO of Novelis Inc., the increased competition in the scrap aluminium industry, with many more players joining, is creating significant pressure on pricing and eventually impacting their financial results. According to the Q3 report, Novelis' net income stood at $110 million, further down by 14 per cent from $128 million in the previous quarter and 9 per cent lower than $121 million during the corresponding period of the last year. Net income attributable to common shareholders, excluding special items, was $119 million versus...
