Calculate Embedded Emissions for Unwrought Aluminium (HS7601)

Enter your input

Payable emissions (tCO₂e/t)

Total CBAM Cost (€)

Notes:
There may be a difference when calculating the price with respect to import volume, carbon price, and benchmark emissions, as the embedded formula may result in minor variations due to decimal rounding. Therefore, the actual value may vary.

CBAM is applicable to trade volumes starting from 50 metric tonnes. For trade volumes below 50 metric tonnes, CBAM does not apply.

Usage Procedure – How to use the CBAM Calculator Sheet

Enter or update values only in the INPUT
PARAMETERS section (Highlighted in blue) , including
the carbon price, benchmark emissions, CBAM
chargeable percentage (as per the phase-in year),
and imported quantity.

The system will automatically calculate the payable
emissions and the total CBAM cost (€) based on the
inputs provided.

Notes:
• Change any input value to automatically update CBAM cost.
• Formula used: Carbon price × payable emissions × quantity.
• Model aligned with CBAM supplier-side illustrative methodology.

05 JANUARY 2018 AL CIRCLE

Danieli to supply new billet and slab homogenizing furnace to Rusal smelter

EDITED BY : BEETHIKA BISWAS 1MINS READ

Rusal’s Krasnoyarsk Aluminium Smelter in Russia has ordered a new billet and slab homogenizing furnace from Danieli Olivotto Ferrè. Danieli will facilitate engineering, supply and delivery of the equipment and supervision of the erection and commissioning.

The new furnace would be designed for homogenizing of slabs and billets of all aluminium alloys in series 1 to 9. produced in the plant.

{alcircleadd}

The unit will heat-treat products with sizes ranging from 300x700 mm up to 800x3,200 mm, and diameters from 127 mm up to 1,320 mm, in lengths from 1,000 mm up to 6,800 mm. The machine will also cool the slabs and billets by means of air flow.

The plant will consist of one movable electrical homogenizing furnace on wheels with two fixed bases and one removable cooling system. The cooling system will be kept on the furnace roof when not in operation, in order to make the best use of the available space.

The best capabilities of the heating system (electrical type) and superior recirculation system (high-speed axial fan installed in each zone) will together optimise the metallurgical performances of the products.

Tagged with: