Calculate Embedded Emissions for Unwrought Aluminium (HS7601)

Enter your input

Payable emissions (tCO₂e/t)

Total CBAM Cost (€)

Notes:
There may be a difference when calculating the price with respect to import volume, carbon price, and benchmark emissions, as the embedded formula may result in minor variations due to decimal rounding. Therefore, the actual value may vary.

CBAM is applicable to trade volumes starting from 50 metric tonnes. For trade volumes below 50 metric tonnes, CBAM does not apply.

Usage Procedure – How to use the CBAM Calculator Sheet

Enter or update values only in the INPUT
PARAMETERS section (Highlighted in blue) , including
the carbon price, benchmark emissions, CBAM
chargeable percentage (as per the phase-in year),
and imported quantity.

The system will automatically calculate the payable
emissions and the total CBAM cost (€) based on the
inputs provided.

Notes:
• Change any input value to automatically update CBAM cost.
• Formula used: Carbon price × payable emissions × quantity.
• Model aligned with CBAM supplier-side illustrative methodology.

13 SEPTEMBER 2020 AL CIRCLE

CFRP-Aluminium hybrid wheel is set for series production, developed by Thyssenkrupp Carbon Components and the Hyundai Motor Europe Technical Center

EDITED BY : RUPANKAR MAJUMDER 1MINS READ

Thyssenkrupp Carbon Components and Hyundai have led a 19-inch wheel rim in CFRP-aluminium construction to series production. On a further note due to its low weight, it has reduced rolling noise.

CFRP-Aluminium hybrid wheel is set for series production

{alcircleadd}

Developed jointly by Thyssenkrupp Carbon Components and the Hyundai Motor Europe Technical Centre (HMTEC), the forged wheel comprised of an aluminium wheel spider and the rim base made of carbon using braiding technology is attached to it.

CFRP-Aluminium hybrid wheel is set for series production

As stated by the manufacturers, to fully certify the new type of construction, besides the usual tests for wheel trials, additional tests specifically tailored to the material CFRP were required. On test stands and in real vehicle tests, the developers have shown that they have increased acceleration, shorter braking distances and significantly reduced road noise. The thermal resistance was proven in downhill driving.

The HMTEC now certifies that the technology for the production of the hybrid bike is unrestricted for series production.

Note to readers: AlCircle brings two-day event for aluminium industry players. We look forward to meeting you virtually at “Global Aluminium Expo 2020”on October 6-7, 2020. For registration, visit www.alcircleevents.com

Tagged with: