Australian Bauxite Limited updates on its Tasmanian bauxite resources

A 2 to 8 metres thick surface layer of gibbsite-rich, low silica bauxite occurs in moderate-sized blocks over the Tasmanian northern midlands area in the hinterland of Bell Bay where Australia's first alumina refinery and first aluminium smelter were established. In early 2012, ABx identified bauxite in Tasmanian locations, which are suitable for production. Drilling commenced in late August and will continue throughout 2013 to extend the areas of bauxite drill testing. Only 7% of targeted areas have been drilled to date and contain the following maiden resources
The resource is based on 377 holes totalling 2,652 metres, averaging 7 metres depth.
Typically there is 3.5 to 4 metres of bauxite beneath 0.5 to 2 metres of soil and overburden which will be selectively removed and replaced over mined-out areas to ensure that seeds and soils remain viable.
Approximately 50% of the bauxite layer is DSO grade Bauxite2 which can be mined and directly shipped.
However, if bauxite production proceeds successfully, other parts of the deposits will be extracted, screened and blended into the stockpile at the port. Once the screening and blending is established, a high quality gibbsite-rich bauxite product suitable for low-temperature alumina refineries can be exported, probably from Bell Bay, Tasmania.
Central Northern Tasmania has good infrastructure, with operating rail lines and heavy-duty haulage highways passing through the bauxite areas, linking directly to efficient operating mineral export ports at Burnie and Bell Bay that have spare port capacity (see Figure 2). Tasmania has a well-developed electric power grid based mainly on hydroelectric power and has ample water supplies. Natural gas from the Bass Strait field is distributed throughout Tasmania and there are many well-established population centres.
Tasmania has a proud mining heritage. Coal mining occurs in the Fingal Valley area east of the main bauxite areas and large cement works are operating in the area south of Devonport to the west of the bauxite areas. The Bell Bay aluminium smelter is operated by Rio Tinto Alcan .
Central Northern Tasmania has some of Australia's best steel fabrication and heavy machinery workshops as well as highly experienced earth moving, transport and construction contractors.
In summary, the Tasmanian bauxite project areas in central northern Tasmania are supplied with power, water, communications and transport infrastructure, near industrial centres serviced by efficient mineral export ports that operate all year round without seasonal interruptions.
Nalco's bauxite mine renewal plan under Naxal threat
Next articleNalco to be allowed mining at Panchapatmali
Grow with
AL Circle





























