
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

Striking workers are back on the job at Nichols Aluminum in Davenport. The company president says around 80 workers have been brought back, after the union ended its strike last week. The walk-out began in January in a contract dispute. During that time, Nichols hired more than 100 full-time temporary replacement workers. The company president tells TV6 that a contract agreement has not been reached, but there are plans for the two sides to meet again this month. There are additional union workers who have not been called back to work yet. The union president said negotiations are ongoing.

In the future aluminum will be widely used in building, means of transport, consumption product and packing material. Especially the demand in China and India will increase largely while a lot of developed countries adopted lightweight aluminum to replace high density material since the improved awareness of environmental protection which will boost aluminum consumption further. On this occasion, China will expand alumina and primary aluminum production capacity continually. Thus, some professional persons expected that the production capacity and amount of consumption for primary aluminum was over 19,000 thousand tons in last year which was 50% higher than 4 years ago. But according to CNIA aluminum growth rate was only 8% in last year, about half of alumina capacity still dependence on...

Alcoa brought some much-needed good news to the market when it reported a surprise profit in the first quarter as productivity improved while higher aluminum prices and better product mix translated into solid earnings. Both revenues and profits were up on a sequential basis while earnings declined on a year-over-year basis. Lower realized alumina prices and higher input costs dented earnings to some extent. The general expectation was that the company would record its second consecutive quarterly loss. Alcoa is a world leader in the production and management of primary aluminum, fabricated aluminum and alumina, and competes globally with other companies like ArcelorMittal and US Steel. Alcoa’s results are closely eyed as it usually is the first Dow company to post earnings. We maintain...

Alcoa Inc.’s March quarter results provide clues to the performance of Indian aluminium firms in the quarter and the outlook in the forthcoming quarters. The company benefited from better aluminium realizations, which were up by 2.5% sequentially, but alumina’s realizations were down 8.5%. Alumina is an intermediate product that is processed further to get aluminium. Higher input costs continue to dog Alcoa’s performance, but it wrung out sizeable productivity gains, allowing it to post a better-than-expected profit of $94 million (around Rs. 483 crore today) from continuing operations. It had posted a loss of $193 million in the previous quarter. Since domestic firms’ product pricing is linked to international prices, companies such as Hindalco Industries Ltd, National Aluminium Co. Ltd...

Reuters reported that demand for US and Canadian aluminum products, measured as shipments from domestic producers plus imports rose by 6.0 percent in January over the year ago period and jumped 14.8% over February. According to the Aluminum Association's Aluminum Situation report, total demand increased to an estimated 1.816 billion lbs in January from 1.714 billion in January 2011 and was up from 1.583 billion lbs shipped in March.

China's production of refined copper and primary aluminium in March rose to the second-highest recorded level as producers expected stronger demand in March to May and new capacity increased operation rates. China is the world's top producer and consumer of most base metals. "Expectations of stronger demand in the peak consumption period has led to higher copper and aluminium production," said Fu Bin, analyst at Jinrui Futures, a subsidiary of top copper producer Jiangxi Copper Co Ltd . Production of refined copper in March was up 16.7 percent from a month earlier to 510,000 tonnes, and rose 8.5 percent from a year earlier to the highest level since a record 518,000 tonnes in August 2011, according to data from the National Bureau of Statistics on Friday. In the first quarter, refined...

According to China Custom that the import volume of unwrought aluminum and aluminum products in March was 120,494 tons which was lower than the former month. From January to March imported 175,157 tons of unwrought aluminum that increased 10.6% when compared with the same period of last year. In March imported aluminum scrap 220 thousand tons, lower than the former month. Moreover, China exported 67,983 tons of unwrought aluminum in March which was higher than last month. In March imported alumina 440 thousand tons up 55.3% compared with last year. The total import volume of alumina was 1,160 thousand tons, the same period in last year this figure was 700 thousand tons, increased 65.8%.

The European aluminum market saw premiums remaining firm last week, with lower prices on the London Metal Exchange, physical tightness and the start of the second quarter bringing consumers back into the market. “The lower LME price is attracting consumer buying,” said a European trader. “There is more back-to-back business.” A producer agreed and said he had seen an increase in the number of inquiries over the past week and that the European market was definitely tighter on the supply side. “Volumes are up and there are more inquiries. Customers need the material and we are already seeing tightness,” he said. The producer said there is not a lot of material being imported into Europe and that, with production cutbacks at some European smelters, there was the feeling that availability of...

Commodity prices have fluctuated substantially over the past few years. The controversial question is, are financial speculators to blame? In general, prices are determined by underlying forces of physical supply and demand. But with regard to at least one commodity -- aluminum -- and at least for brief periods of time, new research suggests that financial flows can indeed influence prices significantly. Over the past decade, commodity prices have risen by an average of 9 percent a year, according to the composite index assembled by the Commodity Research Bureau. Aluminum prices, which have been through some dramatic ups and downs, have gained a bit less rapidly over that time. The average closing price for aluminum on the London Metal Exchange went from less than $1,500 per metric ton in...

CME Group Inc said on Wednesday it plans to launch an aluminum swap futures contract based on the Midwest physical premium, in a move to take advantage of a burgeoning over-the-counter market and compete with the London Metal Exchange's own swap products. The swaps, which are designed for hedging in the physical market, are likely to capture a large OTC market in North America and could see the exchange take on the LME, which launched its own aluminum swaps in January. Major North American aluminum consumers and traders already use OTC contracts based on an average monthly Midwest premium to hedge their purchases through their broker. By clearing the business, they reduce their exposure to counterparty risk. While there is not thought to be a link between MF Global's demise and the...

The Aluminum Association has elected three new members to its board of directors. The three new board members are Matt Aboud, vice president and managing director of Hydro Aluminum's Metal Markets in North America; Anthony Farraj, commercial vice president of Global Packaging for Alcoa Global Rolled Products; and Tom Walpole, senior vice president of Novelis and president of Novelis North America. "Matt, Tony and Tom have diverse experience and expertise in critical areas of the U.S., North American and global aluminum industry," says Tom Brackmann, president of Nichols Aluminum and chairman of the Aluminum Association's board of directors. "They will be a vital part of leading the association over the next several years as the association continues its long-term commitment to researching...

It takes money to make money. Most investors know that, but with business media so focused on the "how much," very few investors bother to ask, "How fast?" When judging a company's prospects, how quickly it turns cash outflows into cash inflows can be just as important as how much profit it's booking in the accounting fantasy world we call "earnings." This is one of the first metrics I check when I'm hunting for the market's best stocks. Today, we'll see how it applies to Kaiser Aluminum (NAS: KALU) . Let's break this down In this series, we measure how swiftly a company turns cash into goods or services and back into cash. We'll use a quick, relatively foolproof tool known as the cash conversion cycle, or CCC for short. Why does the CCC matter? The less time it takes a firm to convert...

The production volume of aluminium castings has declined by 40% in the past decade, Aluminium Federation of South Africa (Afsa) vice-chairperson Bob Stone tells Engineering News. This is despite South Africa’s growing automotive industry, which will inevitably develop a need for more metal casting components from foundries, he says, adding that foundries are struggling to secure contracts to supply components to the automotive industry. Many, in fact, have closed shop, with many more struggling to keep up with rising electricity costs. Major automotive piston manufacturers Federal-Mogul and Kolbenco for instance, had to shut their doors in 2007 and 2008 respectively, leaving South Africa with no local automotive piston manufacturers. Stone attributes this to the high price of raw...

C.S. Aluminum Corp., an affiliate of the CSC Group, has recently decided to budget NT$25 billion to expand capacities in Taiwan and China, the completion of which will enable the supplier to integrate upstream and downstream operations, including melting, refining and production of high-end aluminum products for automobiles. Such move will help the company to markedly improve operations and boost international recognition, in addition to helping southern Taiwan-based manufacturers of aluminum products to build sales. Fully CSC owned, C.S. Aluminum is Taiwan’s largest manufacturer of aluminum products, backed by wide-ranging facilities to processing aluminum billets, coils etc., which are extensively used in the food packaging, electronics, machinery and construction sectors. With support...

Aluminum products maker Novelis Inc, which has cut its fiscal 2012 earnings estimate because of lower shipments and soft demand, will close its Saguenay Works in Jonquiere, Quebec. The plant has 157 staff and production employees and makes aluminum coils to supply other Novelis facilities. It will cease production in August, said Novelis, the U.S. unit of India's HindalCo Industries Ltd. "While the long-term growth potential of Novelis remains strong, we must continue to optimize our footprint to more efficiently support our overall business objectives to drive profitable growth," President and Chief Executive Officer Philip Martens said on Thursday. Novelis said after a review of its manufacturing operations in North America, it determined the Saguenay closure was necessary to...

The case for the suitability of aluminium for the fabrication of fire protection products is made strongly by leading building envelope and solar products specialist, Schueco UK Limited, whose range of specialist glazed aluminium doors, façades and windows is the most comprehensive in the UK market. Based on many years of experience, independent test evidence and assessment, Schueco’s aluminium fire protection systems fully satisfy Building Regulations’ requirements. Almost indistinguishable in appearance from standard products, they meet all the criteria for Integrity (E) – the prevention of the spread of flame – and Integrity/Insulation (EI) – the prevention of the spread of flame and the provision of a barrier to heat. Single and double Schueco ADS 80 FR doors can be specified with...

The situation in the Bauxite Mines is getting worse, after its electricity supply was cut off on Monday, and since it could be disconnected from the water distribution network in two days. According to unofficial information, the company s electricity debt, which has been accumulated for several years, amounts to approximately 110,000, while its debt to the private security company Don amounts to 62,000.

Alcoa says two of its alumina refineries in Western Australia have achieved record production and remain among its lowest-cost plants globally. Alcoa, which is closing and curtailing smelter capacity across its global operations in response to weak market conditions, has singled out Wagerup and Pinjarra in WA as being the stand-out plants in its portfolio. Alcoa global chief executive Klaus Kleinfeld said production at the facilities rose to record levels last year while their profitability had risen by 23 per cent. "All of that was no extra capital," Mr Kleinfeld told a briefing on Tuesday after Alcoa posted an improvement in fourth quarter earnings. "That's the best thing that you can get, right?" Alcoa also operates an aluminium smelter at Kwinana, south of Perth. The company did not...