
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

Indian non-ferrous metals producer Hindalco Industries is sounding out markets for a potential 10-year bond sale, with the aim of raising up to 15 billion rupees ($291.66 million), three sources with knowledge of the discussions said. The company, part of the diversified Aditya Birla Group, may hit the market as soon as this week, two of the sources added. ($1 = 51.4300 Indian rupees)

Below are the three companies in the Aluminum industry with the highest forward price to earnings (P/E) ratios. Forward P/E uses estimated earnings to compare relative value among companies in the same industry. Generally, the lower the forward P/E, the more undervalued a company is believed to be.Kaiser Aluminum ranks highest with a a forward P/E ratio of 13.22. Alcoa is next with a a forward P/E ratio of 10.03. Alumina ranks third highest with a a forward P/E ratio of 9.98. Century Aluminum follows with a a forward P/E ratio of 9.05, and Noranda Aluminum rounds out the top five with a a forward P/E ratio of 6.83. SmarTrend recommended that its subscribers protect gains by selling shares of Noranda Aluminum on March 8th, 2012 by issuing a Downtrend alert when the shares were trading at...

To strengthen its northern operations, Total Aluminium Systems Limited, the authorised representative of SUNSTONE, one of the leading stone chip coated roof brands in Nigeria, has inaugurated its Abuja factory. The decision to open the factory, which is built on two hectares of land, is in response to the yearnings of the consumers, especially northern distributors and other trade partners who have for years been urging the company to site a factory in the area to enhance easy access to the products. In his remarks at the event, the Chief Executive Officer of the company, Chief Frank Owelle, stated that; "As a corporate organisation, Total Aluminum Systems Limited regards feedbacks from trade partners as an important factor required for growth. What Nigerians will be witnessing in the...

Over two lakh tribals are expected to be adversely affected due to the two aluminium plants coming up in the tribal areas of Vishakhapatnam district in Andhra Pradesh. Union minister for tribal affairs and panchayat-raj Kishore Chandra Deo warns against widespread unrest in this areas as these tribals, spread across 270 villages, “are feeling extremely insecure and unsafe.” Speaking out forcefully in their favour, Mr Deo pointed out that mining sanctions have been granted in Schedule 5 areas which are constitutionally protected and where non-tribals are not allow to buy or take land. “I belong to a tribe from Andhra Pradesh but I am not allowed to lease or buy land in the tribal areas of Orissa, Jharkhand or Chhattisgarh. This law has been scrupulously followed in the last five decades...

Alumina Limited (ASX:AWC) will gain a fully-franked dividend of $US26 million from its interest in the Alcoa World Alumina & Chemicals joint venture. Alumina holds a 40 per cent interest in the venture, with the remaining 60 per cent interest held by Alcoa (ASX:AAI). Alcoa Incorporated (NYSE:AA), today rebounded to a first quarter net profit. Alumina has advised today the Alcoa World Alumina & Chemicals joint venture has been impacted by lower aluminium and alumina prices and a strong Australian dollar, but partially offset by continued productivity gains. Alumina’s net profit surged 266 per cent to $125 million in the 2011 financial year.

Anand Rathi Securities has chosen NALCO as value pick. It has recommended `Buy` on NALCO for target price of Rs 90 (Time horizon: 24 months). Prices to stabilize from Q4 2012 Aluminium prices have tumbled almost 30% in a year on worries about the strength of the global economy and thus potential industrial demand, particularly as the European sovereign-debt crisis continues. Aluminium prices have corrected sharply to below USD 2,109 a ton from a high of USD 2,807 in Q1 2011. Structural issues such as over-capacity and high inventories continue to be an overhang on aluminium prices. Few economic incentives to purchase aluminium have led to subdued aluminium imports from China as consumers focused on de-stocking. In addition, excess aluminium production over demand since September 2011 has...

Nalco Foundation, the CSR arm of Navaratna PSU National Aluminium Company Limited, will sponsor an Industrial Training Institute (ITI) to be set up at Marichamal in tribal-dominated Damanjodi in Odisha's Koraput district, at an estimated cost of Rs 4.08 crore. Nalco Foundation chairman B L Bagra handed over an advance cheque of Rs 2 crore for initial mobilisation to Odisha Chief Secretary B K Patnaik here, company sources said today.

LME aluminum closed down USD 36/mt or 1.71% at USD 2,070/mt last Friday as weaker-than-expected Chinese GDP data and rebounding Spanish debt yields strengthened risk aversion and helped the US dollar index return above the 80 mark. The light metal hit a low of USD 2,061/mt and recovered a little bit with some bargain-hunting. With buying support at low-end prices, SMM expects LME aluminum to test resistance at USD 2,100/mt and move between USD 2,050-2,095/mt during today’s trading. The most active SHFE aluminum contract for July delivery is expected to gap lower and hover between RMB 16,050-16,120/mt. Spot aluminum is expected to trade at premiums of RMB 0-30/mt over the current-month SHFE aluminum price this last trading day before delivery of the later. Some spot buyers will enter the...

The News reported that aluminum giant Alcoa swung into profit in the Q1 as it slashed production to cope with a softer global economy and high commodity prices. After the stock market closed, Alcoa the first member of the blue chip Dow Jones Industrial Average to report earnings this year, reported net income of USD 94 million following USD 191 million loss in the Q4 of 2011. Excluding special items, Alcoa earned 10 cents per share surprising analysts who on average estimated a loss of four cents. Sales also beat forecasts rising to USD 6.01 billion in the first 3 months of the year slightly more than in the prior and year ago quarters. Mr Jon Ogg an analyst said that “Alcoa Inc has managed to pull a rabbit out of its hat. While an improvement the Q1 profit was sharply below the year ago...

Can-Eng Furnaces International Limited has added a second plant facility for the manufacture and assembly of industrial furnaces. The new site, located in Port Colborne, Ontario, Canada is close to its main engineering and production shops. The need for additional floor space has been necessitated by strong demand for industrial furnaces in all market segments (aluminium foundry, steel, automotive, and aftermarket). Can-Eng Furnaces is a designer and manufacturer of thermal processing equipment for ferrous and non-ferrous metals.

SMM sources report that some aluminum smelters have been suffering losses due to weak aluminum prices, and aluminum smelters in Henan Province have cut production by over 400,000 mt since China raised the price of electricity for non-residential use in 2011. Although many aluminum smelters have suffered losses since 4Q 2012, few smelters cut or suspended production since production stoppages are costly for aluminum smelters. Industry insiders even said smelters will maintain production despite losses. Aluminum smelters in Henan have cut production by over 400,000 mt since the electricity price hike on December 1, 2011, and more production cuts are still in progress. SMM sources report that the 400,000 mt production cuts were seen at many smelters. Some aluminum smelters stockpiled goods...

According to a recent SMM survey, China’s spot aluminum inventories have fallen for three consecutive weeks (excluding the Qingming Festival). As of April 12, total stocks of aluminum ingot in Shanghai, Wuxi, Hangzhou, and Nanhai were 861,000 mt, down 11,000 mt from a week earlier and down 34,000 mt from a high of 895,000 mt last seen in mid-March. Aluminum ingot inventories were down last week, with inventories in Nanhai falling by 16,000 mt. Some domestic aluminum producers and cargo-holders were unwilling to ship goods to warehouses given current high costs, causing regional aluminum inventories to fall. Meanwhile, improving downstream demand also helped reduce aluminum inventories. Some aluminum producers in Central China extended their internal industrial chain by improving their own...

Japanese traders are seeking to source ADC12 as well as 226 aluminum alloy stored in London Metal Exchange warehouses, as LME aluminum alloy prices have fallen below physical spot prices, market sources said Friday. One Tokyo trader said European sellers had approached his company offering physical cargoes of ADC12 aluminum as well as ADC12 from LME warehouses. "Sentiment is bad there. They don't think German car sales will support the market any more," he said. A Japanese diecaster source added that his company was interested in European material despite the fact that "the sizes are different. But we need to be flexible, need to learn to use various types." Japanese diecasters prefer 5 kg ingots, rather than European ingots that are 8 kg or larger. The LME aluminum alloy settled at...

Steel anode stubs are routinely replaced in all prebake aluminium smelters. With increasing automation, smelters have looked for ways to replace environmentally unfriendly gas cutting, at the same time eliminating the HES concerns of noise and hot metal. At some rodding plants, rods are unhooked from the overhead conveyor and stubs are cut using mechanical hacksaws or circular saws, a lengthy process. For more than ten years VHE of Iceland has supplied an efficient customised band saw, offering energy savings, a low noise profile, clean and precise cut surfaces, and easy and inexpensive blade replacement. The design is such that the rod remains hanging in the overhead conveyor whilst stubs are cut horizontally. The VHE stub saw is suitable for all types of yokes and spiders, including...

State-owned Nalco is looking to set up a new aluminium smelting facility of 5 lakh tonnes and 1,250 MW captive power plant in Odisha's Sundargarh district at an investment of Rs 18,000 crore, a top company official said. "An independent consultant has confirmed that there is no problem of water in Sundargarh district. Their report came a month back. Now, we are hopeful of getting state government's approval for the project," National Aluminium Company Ltd (Nalco) Chairman B L Bagra told PTI. He added the proposed plant will require Rs 18,000 crore investment and would be executed in phases. The Odisha-based company, which currently has an alumina refinery capacity of 2.1 MTPA and an aluminium smelter of 4.6 MTPA, has been looking to set up another smelter in the state for last three...

Aluminium recycling firm Novelis has resumed purchasing cans on the spot market after temporarily stopping earlier this year. The company had placed restrictions on can purchases for its 130,000 tonne capacity plant in Warrington during the early months of 2012. The move was prompted by a low demand for aluminium sheet, coupled with an excess supply of post consumer cans in late 2011. Cans from contracted suppliers continued to be accepted. Cans are now being traded at Novelis' Warrington plant after low demand had caused the firm to impose a temporary restriction on purchasing. Mr Andy Doran Novelis’ national recycling manager who has recently been promoted to an as yet unnamed role within the company, confirmed that the temporary restriction had been in place. But he revealed that as of...

Recently, aluminum industry leading company NOVELIS and Changzhou State HiTech Zone signed an agreement that will build automobile aluminum plate manufacturer in this area. The first phase will invest in 0.1 billion dollars and it is likely to provide products to Asia automakers after finished. When the whole project is completed will be the largest aluminum plate recycling and manufacture base in China. It is learned that NOVELIS covers over 50% in world automobile aluminum plate and aluminum pot plate market.

If you've been to the newly named James Bartleman Archives and Materials Centre, or simply live near Algonquin College, you might be familiar with the work of Kingston artist Don Maynard. Maynard was commissioned to build the sprawling abstract sculpture, simply titled "Archive," that adorns the Tallwood Drive facility. (That's it above, as seen from beneath.) And now, he's been asked by the city to install a new work—this time, a gigantic aluminum star—at the top of a toboggan hill at a brand new Barrhaven Park: The city announced today that Maynard had won the Half Moon Bay Park public art competition. From their release: An omen of good luck and harbinger of change and new beginnings, Falling Star will be a beacon of magical possibilities and imagination in a new and rapidly growing...