
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

Keynote presentation looking at "the key strategic threats for aluminium producers" with Saeed Fadhel Al Mazrooei, President and CEO, EMAL, Jacynthe Côté, CEO, Rio Tinto Alcan, Abdulla J.M. Kalban, President and CEO, DUBAL, Phil Martens, President and CEO, Novelis Inc, Chris Ayers, EVP and President of Global Primary Products, Alcoa CRU's 17th World Aluminium Conference will take place from 30 April - 2 May 2012 during an event filled week for the aluminium industry in Abu Dhabi, which includes the Gulf Aluminium Dinner and other important industry meetings. With so many top executives in the region, and an expected audience of over 300, the conference promises to be the definitive aluminium conference of the year. The programme will decipher the avalanche of industry news and focus on...

Alcoa, the largest US aluminium producer, reported an unexpected first-quarter profit after orders rose and it closed higher-cost smelting capacity. The shares advanced in German trading. Net income fell to $94 million (Dh345.2 million), or nine cents a share, from $308 million, or 27 cents, a year earlier, New York-based Alcoa said on Tuesday in a statement. Profit, excluding restructuring costs and other items, was ten cents a share, compared with the average estimate for a four cent loss from 19 analysts surveyed by Bloomberg. Sales rose 0.8 per cent to $6.01 billion, beating the $5.77 billion average of 12 estimates. The earnings were "driven by higher-than-expected profitability from every operating segment," Brian Yu, an analyst at Citigroup in San Francisco who estimated a six cent...

China’s aluminum demand is expected to grow at 8 to 10 percent annually on average for the next five years, supported by use in beverage cans and automotive sheets, according to Novelis Inc., the world’s largest user. The company is “very bullish” on a range of aluminum usage, Philip Martens, chief executive officer, said in an interview today in Changzhou city, Jiangsu province. Novelis said it will invest $100 million to build its first automotive sheet manufacturing plant in China in the city with an annual capacity of 120,000 metric tons. The nation, which accounts for about 40 percent of global consumption, is likely to see a slowdown in growth. China’s gross domestic product may have gained 8.4 percent in the first quarter from a year ago, according to the median estimate of 38...

East China Aluminum: Futures Fail to Rise, Spot Prices Stabilize with Light Trading SHANGHAI, Apr. 13 (SMM) – Traded prices of spot aluminum in Shanghai were between RMB 15,960-15,990/mt on Friday, with discounts of RMB 10/mt to premiums of RMB 20/mt over the SHFE current-month aluminum price. Low-iron aluminum was traded between RMB 16,060-16,090/mt in Shanghai. Traded prices of spot aluminum in Wuxi were between RMB 15,980-16,000/mt. The SHFE current-month aluminum price opened higher at RMB 16,000/mt and moved between RMB 15,965-16,000/mt. Sellers were not willing to move goods at low prices, leaving main transactions made at RMB 15,970/mt. As China’s 1Q GDP growth was reported worse than expected, coupled with the upcoming delivery for SHFE aluminum contract, traders in spot markets...

The successful bond auction by Italy and Fed’s consideration of QE3 as disclosed by New York Fed President had sent LME aluminum above the 10-day moving average to USD 2,126/mt on Thursday. Sell-off at higher prices had eroded most of these gains, however, with the light metal settling up only USD 8/mt or 0.38% at USD 2,106/mt and recording the weakest performance among base metals. Today’s market focus will be whether the drop in Chinese GDP growth will exceed expectations. LME aluminum is expected test support at USD 2,100/mt and move between USD 2,095-2,140/mt during today’s trading. The most active SHFE aluminum contract for July delivery is expected to hover between RMB 16,150-16,230/mt. Whether it can consolidate above the RMB 16,200/mt mark has yet to be determined by the GDP data....

Vimetco NV (LSE: VICO), the global producer of primary and processed aluminium products, today announces that its Chinese unit, Henan Zhongfu Industry Co., Ltd., has decreased its energy consumption to the lowest level worldwide, following a commercial test of new technology. "We will be able to significantly reduce the power consumption of the aluminium electrolysis process under low temperatures and low voltage using this advanced technology", explained Gheorghe Dobra, CEO of Vimetco. "This is an extremely important achievement for our R&D team in China that will allow us to increase the efficiency of our aluminium smelters. This also secures our role as a leading innovation-oriented company, which was a pioneer in using 400 kA new generation effective electrolyzers on an industrial...

Demand for aluminum in China is growing heavily and the country isn't likely to slow down production, Alcoa Inc.'s (AA) chief executive told Fox Business Network on Wednesday. Klaus Kleinfeld said that despite having to import most of its bauxite and the high cost of energy to produce aluminum, China will continue ramping up production to meet demand. World aluminum demand growth, he said, is at 7%. Increased production of Chinese aluminum isn't a threat to the global market because China isn't going to export the lightweight metal, Kleinfeld told Fox Business. He also said the country is likely to restructure its heavy energy industry, which aluminum is part of.

Aluminum stocks at major Japanese ports at the end of March had declined 7.3% from a month earlier, a trader at a major Japanese house said Wednesday. Aluminum stocks totaled 245,100 metric tons, with 126,100 tons in Yokohama, 104,000 tons in Nagoya and 15,000 tons in Osaka. End-February stocks totaled 264,500 tons. Stocks rose 21.8% from a year earlier, when inventories totaled 201,200 tons. Japanese demand for aluminum has strengthened slightly since the start of the year due to a modest pickup in the construction sector. The supply of aluminum in Asia outside China has tightened since the beginning of January due to the movement of large volumes into longterm financing deals, which can keep aluminum off the market for years at a time. The tighter supply has boosted premiums in Asia,...

The government is encouraging the development of aluminum refinery plants in Indonesia’s two largest bauxite producing provinces; Riau Islands and West Kalimantan. The provinces have a total bauxite reserve of 3.47 billion tons, Energy and Mineral Resources Ministry’s data shows. As a bauxite-producing nation, Indonesia does not yet have smelters to process bauxite into alumina and therefore all ore produced in the country is exported to Japan and China, while to supply alumina to aluminum plants in the country, material is mostly imported from Australia. In Riau Islands, there are 32 companies holding mining licenses over 34,993 hectares. The estimated reserves in the province are estimated to be 180.97 million tons, scattered across four regions — Lingga (93.36 percent), Bintan (2.33...

Alcoa Inc. (NYSE:AA) reported its first quarter earnings and discussed the following topics in its earnings conference call. Take a look. Portfolio Changes Michael Gambardella – JPMorgan: I have a question. Klaus, you’ve mentioned the word ‘portfolio’ when you were talking about your businesses, and it is a portfolio of different businesses that you have, and some are doing very well, some Downstream businesses, some have more work to go like the primary side of the business. Would you consider maybe changing the portfolio and maybe selling some of the things that are doing extremely well now, like record profit and putting more of that money to work in some of the things that maybe aren’t showing as good a results right now, but do you think it has promise them? Klaus Kleinfeld –...

Orbite Aluminae Inc. ("Orbite" or the "Company") (TSX:ORT) confirms its choice for hydrochloric acid ("HCl") recovery technology for its smelter grade alumina ("SGA") plant operations based on data from SMS Siemag and ThyssenKrupp supporting the hydrothermal process efficiency and recovery rates. Part of the design of the SGA plant implies the recovery and the regeneration of hydrochloric acid. Key decision factors in selecting this technology include the high yield recovery of acid, economic viability, as well as environmental friendliness. Orbite's engineers conducted a thorough technical due diligence of the technologies available including spray roasting, fluidized beds and hydrothermal process. The selection process included sites visits of such commercial scale operations. As a...

BELIEVE it or not, there's a silver (actually, aluminium) lining to Wall Street's 1.5 per cent nervy turn overnight and it comes from this year's second worst-performing main metal (behind only nickel). Kicking off the US quarterly earnings season, Pittsburgh plodder Alcoa reported earnings of $US94 million ($91.4m) and earnings per share of 9 US cents, compared with $US309m previously. Alcoa is the first of the 30 stocks in the Dow Jones index to report its quarterly numbers, so expect a better performance tonight. (Our market this morning confined itself to a 0.75 per cent loss but it's hard to know whether that's Alcoa-related). Of course a 69 per cent profit slump is nothing to enthuse about - at least until you consider that the market was expecting Alcoa to post an EPS loss of 4 US...

Matt Aboud, vice president and managing director of Hydro's Metal Markets business in the U.S., will join the Board of Directors of the Aluminum Association, an organization that works globally to promote aluminium as a sustainable and recyclable material. “I think there still is a lot of potential in promoting aluminium as the metal of the future, and I’m very much looking forward to taking on this challenge,” says Aboud, who already holds the position of chairman of the Aluminum Association’s Statistical and Market Research Committee.The Aluminum Association, based in Arlington, Virginia, works globally to promote aluminium as the most sustainable and recyclable automotive, packaging and construction material in today's market. The Association represents U.S. and foreign-based primary...

Firstcall Research is bullish on Parekh Aluminex and has recommended buy rating on the stock with a target of Rs 385 in its April 10, 2012 research report. "Parekh Aluminex Ltd a Mumbai based company established in 1994, headed by Mr. Amitabh Parekh (Chairman and Managing Director). The Company engaged in the manufacture of aluminium foil containers (AFC), aluminium lids and aluminium foil rolls of various sizes, shapes and thicknesses as per customer requirements. The Company's products are used in packaging food items in households, travel and hospitality sectors (airlines, railways, fast food chains, restaurants, hotels, among others). An increasing number of people prefer to use aluminium food packaging containers today and eight out of ten aluminium packaging containers used in India...

Aluminium-rolled products maker Novelis today said it will invest $100 million to set up a manufacturing plant at Changzhou in China with a capacity of 1.2 lakh tonne a year to cater to the auto sector. The company, a subsidiary of Aditya Birla Group flagship Hindalco Industries, signed a pact with the Changzhou National Hi-Tech district to build its first automotive sheet making facility in China, it said in a statement. "The agreement including the land use rights to more than 160 acres was signed today at a formal ceremony in Changzhou City in Jiangsu Province of China. The wholly-owned, $100 million plant will have a capacity of 120,000 tonnes a year," it said. The plant would be commissioned in late 2014, it added. Novelis is a leading producer of rolled aluminium for the global...

China’s aluminum demand will grow 8 to 10 percent annually on average for the next five years on uses from beverage cans to cars, driving up prices over time, according to Novelis Inc., the world’s biggest user. “One would expect the demand in China and Asia to drive up the aluminum price, given the scarcity of aluminum that’s available to the market,” Philip Martens, chief executive officer, said in an interview today in Changzhou city, Jiangsu province, where it will build its first automotive sheet manufacturing plant in China. Prices in London may return to $2,500-$2,700 a metric ton, he said, without giving a timeframe. China accounts for about 40 percent of global consumption of aluminum. The metal, used in construction, beverage cans, electronics and the automotive sector, has...

Through 5 years of hard work and thousand times of experiment the first aluminum alloy semitrailer made in Hebei Putai Machinery Manufacturing Co.,Ltd in Jing County. At present, this skill has passed the recognition of CAA. This kind of semitrailer long 13 meters, made of aluminum structure, adopted disc brake, can realize frequent braking. The total weight was 3.5 tons lighter than iron trailer can save oil more than 7%. The service life was as long as 10 years will created another more economic benefits of 180 thousand yuan per year. After this project put into volume production can produce 2000 units of semitrailer with 1 billion yuan of sales revenue.

FAWER Visteon Climate Control Systems (FVCC), a joint venture of Visteon and FAWER Automotive Parts, has opened a new plant in Chengdu in southwest China to manufacture aluminum radiators for vehicle manufacturers. The new Chengdu plant is a subsidiary of FVCC and will support the FAW-Volkswagen manufacturing base in Chengdu, as well as other automakers in southwest China. Visteon product group president Joy Greenway said the opening marks the company's first climate manufacturing facility in Chengdu. "This strategic location reinforces our ability to support domestic and global automakers in China, the largest automotive market," Greenway said. The new 3,700sq m plant specializes in manufacturing mechanically assembled aluminum radiators and is expected to have an annual production...