
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

LME aluminum climbed USD 26.5/mt or 1.28% to USD 2,098/mt on Wednesday, with an unexpected report of profits and higher-than-expected revenue by Alcoa and dropping yields of Spanish and Italian 10-year debt. Total positions plunged by 18,599 lots as shorts moved to the sidelines. Strong resistance was seen at the USD 2,100/mt mark. SMM expects LME aluminum to struggle at the 5-day moving average and hover between USD 2,080-2,120/mt today as upward momentum is weak. The most active SHFE aluminum contract for July delivery is expected to test resistance at the 5-day moving average and move between RMB 16,100-16,195/mt. Spot premiums over the current-month aluminum price are expected to stay between RMB 0-30/mt even as the current-month aluminum price climbs a little bit. Deals will be seen...

Alcoa may have given a slumping Wall Street just what it needed: a surprise profit. The largest U.S. aluminum manufacturer said Tuesday that it earned 9 cents share in the first quarter. It surpassed analyst forecasts for a small loss by selling more aluminum to a wide range of customers, including car makers and aircraft manufacturers, and operating its plants more efficiently. Alcoa is considered a barometer for the economy. It's also the first of the 30 companies in the Dow Jones industrial average to report results. Its stock rose 5.3 per cent in after-hours trading, providing hope that the stock market might halt its longest and deepest slump of the year on Wednesday. "It looks like they're going to get the earnings season off on a good note," said Argus Research analyst Bill...

Alcoa Inc. AA -2.92% reported that first-quarter earnings fell 69% as the company was squeezed by lower aluminum prices and higher costs for energy. The company said it would contend with sluggish aluminum prices by cutting costs, limiting production and relying more on high-margin end products less vulnerable to slumping metal prices, such as bolts and wheels for cars and airplanes. The Pittsburgh-based company, viewed as a bellwether because it is typically the first major U.S. company to report quarterly results, posted net income of $94 million, or nine cents a share. That was down from $308 million, or 27 cents a share, a year earlier. Sales edged up 0.8% to $6.01 billion. The world's largest aluminum maker's results topped the average forecast of a loss of three cents a share in the...

Vedanta Resources announced that aluminum production for Q4 2012 was 4% higher at 177,000 tonnes in Q4 and 5% higher at 675,000 tonnes for the full year respectively as compared with the corresponding prior periods. The 500 kilo tonne per annum Jharsuguda I smelter produced 115,000 tonnes in Q4 up 6% while the 245 kilo tonne per annum BALCO-II smelter contributed 62,000 tonnes in line with the corresponding prior quarter. The Jharsuguda-I Aluminium smelter has stabilized with most of the key parameters including power consumption at normal operating levels. The BALCO-II smelter operated at its rated capacity for the full year. The 1 million tonne per annum Lanjigarh Alumina refinery has been operating near its rated capacity and its Alumina production was 30% higher at a record 240,000...

ALCOA left the future of 600 jobs at its Point Henry aluminium smelter in Geelong hanging despite reporting a surprise first-quarter profit in the face of depressed metal prices. Addressing analysts in the US for the group's March quarter profit report, Alcoa chairman and chief executive Klaus Kleinfeld gave the Geelong workers little reason to be hopeful the smelter would continue beyond June. The US aluminium giant is the managing 60 per cent partner in the ageing smelter, with Melbourne-based Alumina holding the remaining 40 per cent. Alcoa has responded to the collapse in aluminium prices to less than $US1 a pound by slashing its global aluminium production by 530,000 tonnes annually. “And by the way, I mean the 530,000 tonnes that we have taken off line may not be the end. I mean we...

MCX Aluminium plunged to 3-month lows by 0.9% or Rs 0.95 to Rs 106.15 per kg with its high at Rs 107.55 per kg and low at Rs 106.05 per kg on Tuesday, 10th April. Aluminium was interpreting a downtrend since March 2012 and further slumped to its 3 month lows amidst the huge short selling in the market with 7% rise in its open interest to 7721 lots. As the LME is opened after along weekend, the volume traded stood at 9859 lots compared to 1223 lots traded last day. The contract traded below 9-day EMA and RSI stood in oversold region at 23.8. Depreciation in Rupee cramped the metal from its further fall. At LME, Aluminium dropped for the third consecutive day and stood near to the 3-month lows. Aluminium edged down by 0.1% at $2089 per tonne on Tuesday. The weaker demand from China, gloomy...

Russia exported 547,800 metric tons of primary aluminum in January-February, 2.6% more than in the corresponding period last year, the federal customs service reported late Friday. The aluminum exported in January-February was worth $1.157 billion, compared with $994.5 million a year ago. Aluminum exports to countries outside the Commonwealth of Independent States in January-February totaled 538,000 tons worth $1.134 billion. Exports to CIS states totaled 9,800 tons worth $22.4 million.

Alumina Ltd : * Going forward, Alcoa world Alumina & chemicals will reduce annual Alumina production capacity in atlantic region by around 4% * Awac's production of Alumina for the first quarter was 4 million tonnes * Awac's results for Q1 continued to be impacted by lower aluminium and Alumina prices and the high Australian dollar

Alcoa Inc. continues to look for high-cost smelting and refining capacity for potential capacity cuts, a goal that chief executive Klaus Kleinfeld called a "strong commitment." Speaking to analysts on Tuesday's conference call after the aluminum giant released its first-quarter results, Chairman and Chief Executive Klaus Kleinfeld said: "We continue to look at our portfolio and we continue to monitor the outside world. And by the way, the 530,000 tonnes that we've taken offline may not be the end." In early January, Alcoa announced it would slash its global smelting capacity by 12 percent, becoming the first producer to take direct action to cut costs amid a steep drop in metal prices. On Tuesday, Kleinfeld named as possible facilities for capacity cuts Alcoa's Point Henry smelter in...

Tajikistan Aluminum Co. said Monday that it produced 73,362 metric tons of primary aluminum in January-March, 8% more than in the fourth quarter 2011. The company plans to increase its output this year by 20%, to 332,500 tons. In 2011 the company's output fell by 20% on the year to 278,000 tons because of problems with electricity supplies. A small proportion of the primary aluminum produced by the company is processed in Tajikistan every year, the rest goes for export. In 2011 Tajikistan exported 277,700 tons of aluminum. Aluminum exports accounted for 52.9% of Tajikistan's total in that year.

Alcoa Inc. said on Tuesday it lowered by 1 percentage point its outlook for China's aluminum consumption growth in 2012, but kept its forecast for global demand growth at 7 percent. In 2011, global primary aluminum use grew by 10 percent. Alcoa now expects China's aluminum demand will grow by 11 percent in 2012, down from the 12 percent pace it projected in early January, Chairman and Chief Executive Klaus Kleinfeld told analysts on the company's first-quarter conference call. It also trimmed its projected 2012 outlook for Asian aluminum use minus China to 8 percent from 9 percent previously. Consumption increased by 15 percent in China and by 10 percent in Asia excluding China during 2011. The aluminum giant left its outlook for India's demand growth at 10 percent, matching last year's...

New Delhi: After Kakarapar Atomic Power Station (KAPS) in Gujarat, state-owned aluminium major Nalco is looking to set up another nuclear power plant in collaboration with Nuclear Power Corporation of India Ltd (NPCIL). An NPCIL-Nalco joint venture is already executing unit 3 and 4 of Kakarapar Atomic Power Station (KAPS) in Gujarat of 700 MW capacity each, which requires a total investment of about Rs 12,000 crore. "We are in talks with NPCIL for the second project. There are three options to set up the plant at West Bengal, Odisha and Rajasthan. We are looking at 1,500 MW atomic power project with 49 percent stake," National Aluminium Company Ltd (Nalco) Chairman B L Bagra said in an interview. NPCIL would be the operator of the project with 51 percent stake. He added that a final...

Aluminum producer Alcoa Inc on Tuesday reported a first-quarter profit after a loss in the fourth quarter of 2011 as a result of improved market conditions. Income from continuing operations in the first quarter was $94 million, or 9 cents per share, compared with a profit of $309 million, or 27 cents per share in the same quarter last year. Revenue rose slightly to $6 billion, Pittsburgh-based Alcoa said.

Aditya Aluminium Ltd, a unit of AV Birla group company Hindalco Industries, has lined up Rs 10,000-cr expansion plan to ramp up capacity of its aluminium smelter and captive power plant (CPP) proposed at Jharsuguda in western Odisha. The aluminium company intends to double smelter capacity from 0.36 million tonne per annum (mtpa) to 0.72 mtpa and scale up CPP capacity from 900 MW to 1650 MW. “Aditya Aluminium has presented a capacity expansion plan to the state government. But the expansion has not been referred to the High Level Clearance Authority (HLCA) yet. The Single Window committee has asked the company to abide by certain conditions recommended by the state task force on aluminium at its last meeting held in January this year,” a top official source told Business Standard. The...

CHANDIGARH: On Tuesday morning, residents of the Durga Garden colony, Jagadhari in Yamunangar district, woke up to a powerful blast, which took place in a factory running from a two-room house, leaving one worker dead, his co workers and three members of a family living next door, injured. Enquiries revealed that the incident took place at around 7.30pm when Mohammad Shehzad and Mohammad Aftab were working in the factory. Shehzaad died on the spot while Aftab, who suffered burn injuries, was rushed to the civil hospital. Meanwhile, the district police has sealed the premises which had a gas and diesel furnace used in melting the Aluminium for the molding purpose. Blast was so powerful that temporary sheds of room could be seen lying at some distance. While cracks appeared in the house...

Alcoa Inc N> has raised its forecast for aerospace demand growth this year by 3 percentage points, Chief Executive Officer and Chairman Klaus Kleinfeld said in an interview on Tuesday. Speaking with CNBC, Kleinfeld also reiterated the U.S. aluminum producer's 2012 demand growth forecast for the automotive and transportation sectors, with automotive demand expected to be back at pre-recession levels this year. The interview was broadcast after the company released its first-quarter financial results. Overall global demand will rise by 7 percent, he said, although the picture is mixed with improving economic data in the United States, a worsening European economy and Chinese economic growth seen at around 7.5-8 percent. "Europe is hovering along, muddling through," he said. Kleinfeld played...

Accuride Corporation (NYSE: ACW), a leading supplier of components to the commercial vehicle industry, today announced plans to expand aluminum wheel production capacity at its Kershaw County plant. The company will invest at least $8.73 million to add two machine lines as part of the expansion, which will generate at least 25 new jobs. The Kershaw County Council is expected today to vote in favor of a Fee in Lieu of Taxes (FILOT) agreement for the project; and the company is utilizing South Carolina's readySC worker training program for new hires. “We are pleased to move forward with plans to expand our Kershaw County operations. Our investment helps to ensure we have the right production capacity in place where and when our customers need it, at a higher standard of quality and...

Aluminium demand is expected to grow at an annual rate of 7-8 percent in China and 4-5 percent globally, for an indefinite number of years, the chief executive of Novelis Inc said on Wednesday. Phil Martens, CEO of the world's top maker of aluminium rolled products and aluminium can recycling, was speaking in an interview before a news conference to announce the company's construction of its first aluminium rolled facility in China. The new factory is slated for completion in 2014 and will specifically target the local automotive sector, where the company already have a list of clients including Audi, BMW, Chrysler Ford, GM and Hyundai. The company had earlier announced that it was selling three foil-manufacturing plants in Europe to focus on premium product markets such as beverage cans...