
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Kazakhstan's aluminium exports to the European Union (EU) reached 110,184 tonnes in 2025, generating EUR 274 million in revenue, according to the country's Ministry of Trade and Integration. The EU's share of Kazakhstan's total aluminium exports rose sharply from approximately 6 per cent to 54 per cent, highlighting the growing importance of the European market for the country's aluminium industry. However, the introduction of the European Union's Carbon Border Adjustment Mechanism (CBAM) is bringing new compliance requirements for Kazakh exporters, with carbon accounting, emissions verification and production modernisation emerging as key areas of focus. These challenges were discussed during a session held in Antalya, Türkiye, alongside the 31st Conference of the Parties to the UN...
Grow with
AL Circle

Aluminium maker Alcoa said Saturday it had began to close down its plant on the island of Sardinia in a move that will see hundreds of job losses. Alcoa blamed "factors beyond our control" including "the economic situation and the burdens imposed by the European regulatory system" for the shutdown of the factory, which it said would take several weeks. "Alcoa should be ashamed of not leaving the necessary time to find a solution, particularly as there is now an offer from a Swiss society," the CGIL trade union said, after a week of protests over the factory's fate. Swiss multinational Glencore is considering buying the plant and Alcoa said it was shutting down the foundry on the Italian island in a manner which would ensure "the concrete possibility to reboot it" should an offer be made...

A coalition of Cape York councils is planning to lobby the State Government to be included in its Royalties for the Regions program. The government has promised to invest almost $500 million over four years in regions under pressure from resource development. Aurukun Shire Council CEO John Japp says many Cape York communities are feeling the pressure. "Hope Vale has a large silica mine; Cape Flattery, Napranum and Mapoon and Weipa are right on top of the bauxite mine that Rio Tinto run; there's a large bauxite mine being opened in the south of Embley,' Mr Japp said. "Aurukun actually has four possible mines that could be opened on the Aurukun bauxite resource." In the state's Gulf Country, the Burke Shire is home to the Century mine, Australia's largest open pit zinc mine. The operator...

Attracting investors to the mining town of Linden is key to government’s developmental agenda for the people and the region. As such, Finance Minister Dr. Ashni Singh explained that investors continue to express interest in the mining sector that has contributed significantly to the Gross Domestic Product for the first half of 2012. The bauxite sector has grown significantly for the first half of 2012 to 41.9 percent and the export earnings amounted to US79.4M. Finance Minister Dr. Ashni Singh said the figure shows a 21.8 percent increase. Turning his attention to linden, he believes that continued normalcy in the region is vital. “I will continue to make the point that normalcy in Linden was and continues to be in the best interest of Lindeners and it’s extremely important that Linden...

Faced with acute shortage of bauxite to run its one-million-tonne alumina refinery at Lanjigarh in Odisha, Vedanta Aluminum Ltd (VAL), an arm of London-listed Vedanta Resources, may issue a notice to the state government on Monday or Tuesday to shut down the unit. The three-month notice would be sent to the state labour commission for legal formalities, said a top official of the company. After the notice period, the firm could shut the plant and lay off workers without any legal hurdle. The plant directly employs 5,000-6,000 people. A shutdown could affect 30,000 people dependent on the plant. The official said the company had “zero stock” of bauxite and was running the plant intermittently recording only 55 per cent capacity utilisation. Against a daily requirement of 10,000 tonnes of...

US Federal Reserve Chairman Bernanke said in central bank meeting last Friday that US unemployment rate remained high and the Fed would take measures to help economic recovery if necessary. Expectations for easing policies remain. In response, LME aluminum broke through USD 1,900/mt to a high of USD 1,904/mt at the tail of trading. Investors were wary as the specific time when stimulus policies will be introduced remains unknown due to mixed economic data. Finally, LME aluminum trimmed some gains and was pressured under the 5-day moving average before closing at USD 1,892.3/mt, up USD 13/mt or 0.69%. Latest LME aluminum inventories were down 8,900 mt to 4,870,050 mt. China’s PMI for August hit nine-month low at 49.2, which pointed to contraction, aggravating economic downward risks and...

United Co Rusal could restart the Friguia alumina refinery in Guinea if the government grants it further bauxite concessions, first deputy ceo Vladislav Soloviev told Metal Bulletin. “Among our working refineries, Friguia is the most expensive in terms of production costs. We incurred losses in the second quarter because of the Friguia one-off impairment,” Soloviev said, adding that the refinery remains idled because it is cheaper for Rusal to buy alumina from the market than to produce at Friguia.

Japan's domestic shipments of auto diecasting aluminum alloy slipped 2.2% month on month to 38,784 mt in July, despite a 3.3% gain in total alloy shipments to 70,322 mt, the Japan Aluminium Alloy Refiners Association said Thursday. On a year-on-year basis, July ADC shipments were up 2.7%, while total alloy shipments were up 5.2% -- largely due to a lower base last year due to plant shutdowns following the March 11 earthquake. Shoji Matsunaga, an official with the association, told Platts that July ADC shipments fell compared to June as secondary aluminum alloy smelters focused on producing alloy for molding applications, known as AC. July shipments of AC came in at 19,044 mt, up from 16,597 mt a month ago. "There was a shift to AC production from ADC as AC alloys are not exposed to...

Vimetco reports that sales for the half year were USD 1,180 million (H1 2011: USD 1,382 million). The decrease mainly reflected lower aluminium prices, accompanied by weaker demand. In the first half of 2012, the cost of goods sold decreased by approximately 10% to USD 1,053 million, from USD 1,176 million during H1 2011. Despite the lower sales volume, Vimetco had a positive EBIT of USD 80 million, in H1 2012, down from USD 167 million in H1 2011. The net finance costs increased to USD 233 million, in the first half of this year, up from USD 88 million, in H1 2011, with total interest expenses of USD 112 million, increasing from USD 88 million, in the first half of the previous year. Please also see note 7 in the half-year accounts. The Group's financial result was also impacted by the...

PSI Metals Non Ferrous has announced that it will be showcasing production management solutions designed for the metal industry at the “ALUMINIUM 2012” industrial fair to be held in Düsseldorf, Germany. The company’s PSImetals solution helps companies that deal with production and processing of aluminium to optimize their production processes. Solutions for energy management, which form a significant part of the production management solution, are also being presented. The PSImetals solution helps in optimizing normal objectives including output, efficiency and ability to meet delivery dates. Apart from these objectives, the critical energy cost factor has also been integrated from procurement stages through to production management, which will lead to significant savings. PSI Metals...

First Aluminium Nigeria Plc failed to present its financial results for 2012 (first and second quarter results) during the company’s presentation of facts behind the figures held at NSE Wednesday. Stockbrokers who were present at the occasion lamented the lack of financial statements from the company stressing that financial results provide a basis by which its performance would be judged. Although they commended the company for coming to meet with operators of the capital market, they said the presentation of financial reports would further enhance the fate of the company at the market. The company had in its results for the year ended December 30, 2011, recorded a gross profit of N324 million, compared to N629 million in 2010. Its turnover stood at N8.79 billion in 2011, as against...

Chinese firms plan to invest $8.6 billion on aluminum and iron smelter projects in Indonesia, the industry minister said on Thursday, in a bid to guarantee supplies of metals under threat from a ban on exports of mineral ores from 2014. Indonesia, a major supplier of metal ores to top consumer China, is trying to drive investment in the metal processing sector by imposing a 20 percent tax on raw ore exports ahead of an outright ban. China is the largest consumer and producer of aluminum and Indonesia supplied almost 80 percent of the 25 million tonnes of bauxite it bought in the first half of the year. However, imports from Indonesia slumped in June in July, after the tax was imposed. The planned investment appears to be the biggest to date by Chinese firms in Indonesia's metal processing...

Workers from a threatened Alcoa Inc aluminum plant in Sardinia staged a loud protest in Rome on Thursday to pressure the Italian government to intervene to keep the factory open. "We want to live with dignity," said worker Renato Cocco. "We want to work and earn our living for ourselves, for our children and for our families." Protesters draped in colourful flags beat the ground with their hard hats and chanted slogans, a line of police separating them from the ministry of economic development. "We cannot accept that our region dies," union leader Daniela Piras said. "We want the Italian government to assume their responsibility and not give up on this aluminum plant." U.S.-based Alcoa plans to close the loss-making factory by November unless a buyer is found. The only interested suitor,...

India's aluminum exports could rise 5 percent in the current fiscal year to 325,000 tonnes, despite a slowdown in global demand, a senior industry official said, as falling prices have led rival global producers to cut production. Declining aluminum prices have forced major players such as Alcoa (AA.N) and Norsk Hydro (NHY.OL) to cut output and have prompted China, the world's largest consumer of the metal, and Japan to ramp up purchases. "Due to the sudden closure of some of the smelters in the U.S.A., the export demand has slightly improved," Mukesh Kumar, president of Vedanta Aluminum Ltd, India's largest aluminum producer, said in an interview. Vedanta Aluminum, a part of billionaire Anil Agarwal-controlled Vedanta Group (VED.L), produces about 40 percent of the South Asian nation's...

The mines ministry on Thursday has given Anshuman Das, commercial director of Nalco, additional charge as chairman and managing director of the state-run company. After taking charge of Nalco, Das said his job will be to prioritize projects. "We will take up a proposed Rs 16,000 crore aluminium smelter project at Sundergarh in Orissa and Rs 4,000 crore alumina refinery at Gujarat on fast track. We also have to remove disruptions in coal supply for smelter operations and revamp logistics of Damanjodi. The greenfield mining project at Patangi will also be expedited which will boost performance of our smelter and coal complex," Das told ET. Das has graduated in mechanical engineering from Rourkela engineering college (now National Institute of Technology) in Odisha and has done his master in...

Atlanta-based Novelis, a world-leader in rolled aluminium products, has today announced that it has moved a step closer to achieving its goal of using 80% recycled metals in its production processes. The company's second annual sustainability report shows an increase in the recycled content of its products from 33% to 39% one year after announcing its target of achieving an 80% recycled content by 2020. The report, which received an A rating from the Global Reporting Initiative (the world's most widely used framework for sustainability reporting) also recorded a 19% reduction in energy intensity, an 11% reduction in greenhouse gas emissions and an 18% improvement towards reducing landfill to zero. Chief executive Phil Maartens says that sustainability is driving the company's business...

Shree Narmada Aluminium Industries Ltd has informed BSE that a meeting of the Board of Directors of the Company will be held on August 30, 2012, inter alia, to transact the following business:1. To discuss Audited Statement of Account of the Company for the year ended March 31, 2012.2. To approve the retirement and re-appointment of Mr. V Krishna Swamy and Shri Milan R Patel.3. To approve the Draft of the Report of Board of Directors along with Corporate Governance and to authorize the Chairman to sign the same on behalf of the Board.4. To approve the resolution for convening 31st Annual General Meeting of the Shareholders of the Company.5. To decide the date of Book Closure of Register of Members for the purpose of 31st Annual General Meeting of the Company.

The realty sector of Ghaziabad and nearby areas has paved way for the growth of several allied industries. Of these the aluminium fabrication industry has been reaping profits in the region, owing to the various advantages aluminium has over wood, iron and other material used for construction purposes. But aluminium fabricators now face stiff competition from Unplasticised Polyvinyl Chloride (uPVC) - a new raw material, which is being preferred over aluminium. This has forced aluminium fabricators to innovate to adapt to the changing needs of the market. Satish Kumar of Indirapuram-based Shubham Aluminium informed that the market has been changing over the years, "Earlier it was wood that was used. It was replaced by mild steel and then by aluminium and now uPVC is being preferred."...

Aluminium Company of Malaysia Bhd (Alcom) says it will be able to sustain its recovery after being hit by soft demand for its products globally last year. The company has been affected by the US and eurozone economic crisis, regional impact of the earthquake in Japan, political crisis in the Middle East and North Africa as well as severe flooding in Thailand. Newly appointed managing director Tom Boney said Alcom would begin to build a higher-value product portfolio while broadening and deepening its customer base and relationships. “We will further enhance our cost management, operating performance and productivity levels, which will be essential for margin preservation and to deliver a strong financial performance,” he said after Alcom AGM. “We will also continue to work towards...