For decades, aluminium windows and doors were largely viewed as functional elements of construction. Today, advances in extrusion technology, precision engineering and architectural design have transformed their possibilities. What once required bulky frames and conventional openings can now be achieved through remarkably slender profiles, expansive glass surfaces and sophisticated systems that bring together structural strength, durability and understated luxury. As Indian architecture becomes increasingly ambitious, aluminium is no longer simply framing spaces; it is helping redefine how they are designed, experienced and connected. Market data According to ALUMEX India 2025: Extruding the Future, India is the world’s second-largest primary aluminium producer and third-largest consumer,...
Two recent Tesla stories sit at opposite ends of the range. Tesla Model 3 is set to benefit from cost-focused Cybercab inverter technology, announced on November 1 2026. The flying car, Tesla Roadster, uses aluminum in its battery cells and underbody protection, reinforcing power delivery, thermal management and lightweight construction. The two models reveal how aluminum can serve very different engineering priorities, from making electric vehicles (EVs) more affordable to helping them deliver extraordinary performance. Tesla Model 3: the everyday car gets Cybercab hardware Nick Verzini, Tesla’s Head of Drive Unit Engineering, mentioned on a Munro Live factory tour that a new printed circuit board assembly and power stage from the Cybercab’s inverter will enter Model 3 production in...
Grow with
AL Circle
Showa Aluminum Can Corporation (SAC), a consolidated subsidiary of Showa Denko, announced that it will cease production of aluminium can plant in June 2020. The company will stop a part of its production lines in Oyama and Hikone in order to respond to changes in the domestic market environment. “In the domestic market for aluminium cans, the demand for cans for alcoholic beverages continues to be strong due to an increase in the demand for alcoholic beverages other than beer and beer-like beverages, though the demand for beer/beer-like beverages continues declining. However, the demand for aluminium cans for non-alcoholic beverages is expected to decrease significantly due to a shift from aluminium cans to PET bottles. As a result, the total demand for aluminium cans in Japan is expected...
In the first week of May Hindalco Industries, Ball Beverage Packaging (India) and Can-Pack India together announced the forming of a consortium called Aluminium Beverages Can Association of India (ABCAI) in order to promote the use of aluminium cans for beverage packaging in India. ABCAI would partner with government organizations, corporates, trade bodies and consumers to do campaigns that will spread awareness on the economic and environmental benefits of aluminium cans for beverage packaging. It also plans to commission studies in order to showcase the various benefits of aluminium beverage cans in the field of logistics, refrigeration, water and power conservation. Prakash Nedungadi, Group Head, Consumer Insights & Brand Development, Aditya Birla Group says that aluminium plays a...
U.S. President Donald Trump declared last Friday, May 17 that some imported vehicles and parts pose a national security threat to the U.S. leading to serious displeasure among most of its trade allies including the Japan's automakers' lobby. The White House document also hinted that it would seek voluntary export quotas on autos from U.S. trading partners. Though he delayed the 25 per cent tariffs on imported cars for up to six months for further negotiations, his declaration did not go down well with the Japanese automakers. “We are dismayed to hear a message suggesting that our long-time contributions of investment and employment in the United States are not welcomed,” said Akio Toyoda, chairman of the Japan Automobile Manufacturers Association. Toyoda, president of Toyota Motor Corp...
Metal Packaging Europe conducted a study called the Life Cycle Assessment (LCA) on 25cl, 33cl, and 50cl volumes of aluminium beverage cans. As the name suggests, the study covered the entire life cycle of aluminium beverage cans produced in Europe, starting from raw materials extraction to manufacturing and end-of-life. The observation of the study records significant reductions in CO2-equivalent emissions, compared to 2006 data. The carbon footprint has been reduced by 31 per cent on average for the three volumes, ensuring the industry’s commitment towards lowering carbon emissions and separating production growth from the environmental footprint. The factors that made this progress possible were the continuous improvements in the aluminium production and can manufacturing processes,...
According to a statement of Ball India the consumption of aluminium cans for storing beverages, food items and household products in India has potential to grow significantly from the present rate. Ball India acquired its Maharashtra plant from Rexon in 2006 and set up its own plant in Andhra Pradesh in 2015. The aluminium can maker supplies cans for beverage majors like Coca-Cola as well as for beer companies in India. “We estimate that there will be an 8X growth in consumption of aluminium cans in India by 2030. Currently, the per capita can consumption in India stands at around one per annum. In comparable economies such as Vietnam, the per-capita consumption is approximately 70 per annum; in China, it is around 40 per annum,” said Amit Lahoti, Managing Director – India, at Ball...
Heesen Yachts’ eighth vessel in 5000 Aluminium Class Masa has reportedly started sea trials, after being launched in Oss early last month. Masa’s exterior, designed by Frank Laupman of Omega Architects, displays key details including a "pelican beak bow" and "sporty mast", while her interior, designed by Cristiano Gatto , evolves “fresh and elegant” feature. A light palette of colours creates an atmosphere of “tranquillity”, the yard said. The yacht’s all-aluminium, semi-displacement hull, on the other hand, has been designed and engineered by Heesen’s in-house team. Accommodation is for 12 guests in five lower deck guest suites and a main deck master stateroom, and for nine crews, in addition. Power will come from a pair of MTU 16V 4000 diesel engines for a top speed of 23 knots and a...
U.S. President Donald Trump declared last Friday, May 17 that he agreed to the Commerce Department’s decision that some imported vehicles and parts pose a national security threat to the U.S. However, the White House delayed the auto tariff decision for about six months to allow more time for trade negotiations with the European Union and Japan. The White House document also hinted that it would seek voluntary export quotas on autos from U.S. trading partners. Such a designation to the imported vehicles has angered some of the U.S. allies who export vehicles and auto parts to the US market. U.S. automakers also strongly opposed the tariffs, saying they would hike prices and threaten U.S. jobs. There is also strong opposition in the U.S. Congress including many prominent members of Trump's...
Hobart ship-building company Taylor Bros is currently constructing two 16.3 metre-long and 6.2 metre-wide aluminium ‘heavy-lift’ barges for Australia’s Antartic flagship RSV Nuyina. These two barges and a fleet of small watercraft will reportedly support RSV Nuyina when the icebreaker voyages south. RSV Nuyina is currently being constructed in Romania at the Damen Schelde Naval Shipbuilding yard and is due to arrive in Hobart in 2020. Antartic Modernisation Brach Manager Rob Bryson said the two barges, which will travel at eight knots in calm seas with 448 kilowatt, will transport up to 45 tonnes of cargo each, in ship-to-shore operations. “The barges will be our primary link between the ship and shore as we don’t have wharves or jetties in Antarctica,” Mr. Bryson said while adding,...
Constellium has supplied aluminium auto body sheet and crash management system to Groupe PSA. The company provides aluminium sheet for the hood of Groupe PSA’s new PEUGEOT Partner and Rifter, and new Citroën Berlingo and Berlingo Van. For the outer hood panels, Constellium delivers Surfalex®, a material developed to meet stringent requirements for high surface quality with specific hemming and roping properties. For the inner hood, the company provides a material solution with superior formability and mechanical resistance. Constellium also delivers the front Crash Management System for this range of vans. Aluminium provides superior energy absorption to protect the passengers and vehicle in the event of a collision. Dieter Hoell, Vice President, Global Automotive for the Packaging and...
According to a recent report published on Monday by Automotive News, Ford's Aluminum F-150 isn't that expensive to repair, contrary to the claim that Ford did the mistake of using a fragile and expensive-to-fix material on its truck. When it was launched in 2014, dealers were indecisive about investing in the training and equipment to repair the bodies of the Aluminium F-150. Requirement equipment was costing dealers between US$30,000 and US$50,000. However, the way, the aluminium truck bodies were designed once the technicians are trained and shops are ready the repair process took less time than the steel body panel. The repairs for the F-150 were not only time saving but parts prices are lower too in many cases. Prices for hoods and front bumpers are lower while some parts, like...
According to a recent report, China Dynamics Limited has entered into a strategic business cooperation agreement with Eastern Ferry Company Limited, with the intention of jointly promoting the development of green marine transportation in Hong Kong. As per the memorandum of understanding that they have signed, China Dynamics plans to supply new energy ferryboats to Eastern Ferry, ensuring to meet environmental protection and energy-saving requirements for marine vessels in Hong Kong. A preliminary round of discussions has taken place between the two parties, and now they believe that they should pursue further negotiation before undergoing formal procurement agreement. The Hong Kong Government intends to include certain terms in order to encourage ferry operators to use...
Tasmania shipbuilder Incat has reportedly bagged a contract to build the ninth and the world’s largest aluminium ship for its Latin American customer Buquebus. The ship will be 130-metre long and will operate between Argentina and Uruguay. As per the report, the project is worth around US$130 million and expected to involve hundreds of workers. Incat founder and chairman Robert Clifford said that the company will spend six months designing the vessel, with delivery expected in three years. The vessel is likely to be 32 metres wide and weigh 13,000 tonnes, with a capacity of carrying 2,100 passengers and 220 cars on two routes from Buenos Aires lasting 75 minutes and three hours. Robert Clifford said this vessel would be the largest aluminium vessel in respect to tonnage, length, and...
The European Aluminum Foil Association (EAFA) releases a new video showing the advantages of aluminium containers and infinite recyclability of aluminium. Europe recycles about 65 per cent of all aluminium packaging. Aluminum foil is the ideal material for food and animal food packaging because of its easy recyclability. “Because of its properties such as light weight, ease of molding, high heat resistance or excellent barrier properties, the material is ideal for protecting foods from outside influences and reducing food waste at the end of the day", says Peter Wallach, EAFA Container Group Chairman, "It is truly a container for the 21st Century”. The EAFA Container Group represents more than 80 per cent of the foil container manufacturing capacities in Europe. The group covers...
Architects Ludovica Serafini and Roberto Palomba have reportedly designed a collection of outdoor furniture for Spanish brand Expormim, in tribute to Hollywood icon Elizabeth Taylor. The collection called Liz includes an armchair and a sofa in two sizes. They are made of stretching fabric over curved, tabular aluminium frames. “Liz is a project inspired by the flair of the 1950s,” said the brand while adding, "The elastic fabric stretching along the metallic tubular structure marks lines and transparencies, giving rise to a play of graphics and lightness that make you feel the soft embrace of Liz." The Liz armchair has a frame that curves inwards at the arms. It comes with two cushions that form the seat and backrest. The sofa shape is similar to the armchair and is available in both...
The global supply chain for steel, copper and aluminium products set to gather in Johannesburg for the inaugural Africa Wire, Cable & Tube Conference Metallic wire, cable, tube and pipe products are crucial to industries that are key pillars of economic development across Africa; such as mining, power supply and construction. For the first time, a conference is being held to bring together local stakeholders and international experts to discuss how to boost production and trade in these products throughout the continent. The inaugural Africa Wire, Cable & Tube Conference, co-organised by CRU and The Southern African-German Chamber of Commerce and Industry (AHK), will be held on 11-13 November 2019 in Johannesburg, South Africa. wire and Tube Düsseldorf, the world’s largest trade shows in...
Volvic, bottled water brand in the UK, has announced a new range of sparkling drink, L’mon. Lemon & Orange, Lemon & Lime and Lemon & Grapefruit flavours come in 330ml aluminium can. The new range combines at least 25% real fruit juice and British spring water. L’mon range will be available nationwide across the UK and Ireland from the end of May. Jacqueline Lane, senior brand manager for Volvic UK & Ireland, said: “Now, more than ever, consumers are on the lookout for healthier products, which suit their busy lifestyles. Fizzy drinks continue to be hugely popular but are often seen as a less health conscious choice, particularly if they are high in sugar or full of artificial additives. At Danone, we don’t think you should have to choose between the pleasure of a tasty fizzy drink and...
Norway’s aluminium cans import is estimated to stand down this year to 9,374 tonnes, according to our third-party data. In 2018, the estimated import amount was at 9,539 tonnes, after growing from 9,502 tonnes in 2017. But the amount of import in 2017 was down from 2016, as the import volume in the latter year was at 9,734 tonnes. But despite the fall in Norway’s estimated amount of aluminium cans import in 2019, the country is likely to see a growth in aluminium cans import cost. This year the cost is likely to grow from US$60 million in 2018 to US$ 61 million. In 2018, on the other hand, the import cost had stood down from US$64 million in the previous year, despite a rise in import volume. A similar trend was seen in 2017 as well when the import cost had risen from US$56 million in...
Turkish shipyard Bilgin Yachts has reportedly launched the second superyacht in its 156 model series in a private ceremony at the yard's Kucukcekmece facility in Istanbul. The yacht named Lilium is 47.5-metre long and built from a steel hull and aluminium superstructure. As per the report, the vessel will now undergo sea trials before undertaking her maiden journey to the south of France, following which it will make her public debut at the Monaco Yacht Show in September. While explaining the yacht’s name and where it derives from, Bilgin Yachts chief executive İsmail Şengün said: "The Bilgin 156-II is named after the beautiful white flower Lilium as a sign of our promise to the yacht owners: A sunny and happy day on a deck." White and golden interior, with brass and marble as the two key...
