Japan imported 1.36 million tonnes of downstream aluminium products in January–August 2026, down 6.2 per cent from 1.45 million tonnes in the same period of 2025. The latest figures show lower overall imports, with shipments from the UAE seeing the biggest decline among the five leading exporters listed, while imports from Australia also fell. Japan’s total imports decline Japan’s downstream aluminium imports stood at 1.36 million tonnes through August 2026, a drop of around 90,000 tonnes, compared to shipments in 2025 during the same period. However, annual imports remained broadly stable over the previous three years, rising from 2.11 million tonnes in 2023 to 2.12 million tonnes in 2024, an increase of 0.3 per cent. In 2025, imports edged up by a further 0.1 per cent to 2.12 million...
Alumil India, the fully-owned Indian subsidiary of Alumil Group, has successfully delivered advanced fenestration solutions for NICMAR University in Pune, transforming a precast campus vision into a functional, durable and future facing learning environment. The project required approximately three hundred windows within a tight timeline which was successfully delivered by Alumil India. The project deployed Alumil’s top-hung window systems combined with sleek mullions and glazing. “NICMAR University presented an opportunity to demonstrate how fenestration can become an integral part of both a building’s architecture and its performance. The project required us to respond to large openings, intensive daily usage, acoustic and weather considerations, safety, and the specific challenges of...
Grow with
AL Circle
Yuan Guodong, Secretary of the Party Committee and Chairman of Shanxi Huaxing Aluminium, recently attended the strategic cooperation matchmaking meeting of China Coal Group Shanxi Company, where the two sides discussed deepening cooperation and exchanges, as well as accelerating cooperation and development of aluminium under coal. The conference was attended by more than ten representatives from Luliang Mining and Shanxi Coal Group. During the meeting, it was emphasised that China Coal possesses abundant aluminium resources beneath coal deposits in Xingxian County. The execution of initiatives aimed at developing these aluminium resources holds significant importance in enhancing the overall utilisation rate of resources, fostering the high-quality growth of the aluminium industry, and...
AMAG Austria Metall AG has reported its latest financial results till September 30, 2023, highlighting stable earnings with revenue above EUR 1 billion, even amid global inflation and decelerating aluminium prices. Although the revenue during the first nine months of 2023 saw a drop of 15.6 per cent year-on-year, it managed to come in at EUR 1,142 million. The revenue in the third quarter was recorded at EUR 346.4 million compared to EUR 449.6 million in the previous year. AMAG noted that aluminium demand from the aircraft sector was strong and that from the automotive industry was stable. But demand from the sports and architectural sector was muted, resulting in a fall in AMAG's shipments volume. From January to September 2023, AMAG shipped 327,700 tonnes of aluminium products – 4 per...
Constellium SE has announced the third quarter results ended September 30, 2023, revealing a fall in revenue attributed to demand headwinds in several end-user sectors. Heavy inflation also threw a challenge to the company, pulling down its Q3 revenue by 15 per cent year-on-year to €1.7 billion. However, according to Constellium’s report, its value-added revenue (VAR) saw a rise of 5 per cent Y-o-Y to €704 million during Q3 2023, driven by improved price and product mix. From January to September 2023, it stood at €2,243 million, up by 11 per cent from €2,029 million. Adjusted EBITDA also registered a growth of 5 per cent in Q3 from €160 million in Q3 2022 to €168 million. Constellium posted that its net income during Q3 2023 was €64 million, witnessing a sharp fall of 51.15 per cent from...
Gerald Mayer has expressed his desire to terminate his Management Board contract prematurely after serving on the Management Board of AMAG Austria Metall AG (AMAG) for approximately 16 years. This decision is driven by his ambition to explore new professional opportunities. On October 25, 2023's Supervisory Board meeting, his request received unanimous approval. Gerald Mayer has been Chief Financial Officer at AMAG since 2007 and was appointed Chief Executive Officer effective March 1, 2019. During his tenure on the Management Board, he was pivotal in making significant strategic decisions, including the successful listing of AMAG on the Vienna Stock Exchange, among other accomplishments. Herbert Ortner, the Chairman of the Supervisory Board of AMAG Austria Metall AG, commented, "Gerald...
The aluminium industry in India shines amid a global landscape that is generally lacklustre or facing downturns. This positive outlook is attributed to the Indian government's efforts in infrastructure development and the industry's response to meet the increasing demand. Nilesh Koul, the Senior President and CEO of Aluminium Downstream at Hindalco Industries conveyed this perspective during the aluminium conference in Barcelona. India already holds the position of the world's second-largest aluminium producer, and the country's aluminium consumption demand is expected to double over the next decade. Koul added, "The energy in India right now is incredible. After five years working in Switzerland, I returned to my home country, and many other expatriates are also moving back to India.”...
Exlabesa has officially completed its acquisition of Flandria Aluminium, a French company with expertise in extrusion, machining, surface treatment, and aluminium profile recycling. The agreement, which has successfully passed the necessary legal scrutiny by relevant authorities and obtained approval from the French Competition Commission, is now in effect. This acquisition, aligning with Exlabesa's global expansion strategy, will enhance its direct presence in France, Belgium, and the Netherlands. This move enables the company to deliver premium, value-added products while providing the highest level of service in these regions. Both firms, with their roots in family heritage, share congruent values and a deep passion for the aluminium industry. These commonalities lay a solid foundation...
CastAlum, a company specializing in producing lightweight aluminium components for the automotive sector, received recognition at the Powys Business Awards for its innovative utilization of technology. Established in Welshpool in 1999, CastAlum Limited, boasting a workforce of 150 employees, clinched the prestigious Technology and Innovation Award, generously sponsored by CellPath, during the annual awards event hosted at The Hafren in Newtown on October 20, 2023. The event, organized by the Mid Wales Manufacturing Group (MWMG) and supported by various sponsors, celebrates its annual awards, which had their inception in 2009. These honours are extended to multiple entities, including companies, organizations, social enterprises, and charities. Castalum is a prominent high-pressure...
The Shanghai Municipal Economic and Information Technology Commission, in conjunction with the Municipal Development and Reform Commission, recently released the roster of green manufacturing demonstration units for the first batch of 2023. Among these units, Shanghai Shenhuo Aluminium Foil Co Ltd was honoured with the "Shanghai Green Manufacturing Demonstration Unit designation." Since 2018, the firm has undertaken an average of 1 to 2 essential energy savings and environmental protection initiatives every year, saving 974.7 tonnes of standard coal, which equates to a 1450.0-tonne reduction in carbon dioxide emissions. The application for the company's "green factory" at the state level has successfully been evaluated by Shanghai experts. It has now progressed to the audit phase under...
Cinnaire, a Lansing, Michigan-based organization with a strong community focus, has recently awarded an $11 million New Markets Tax Credit (NMTC) investment to Wisconsin Aluminium Foundry (WAF). The substantial grant from a community-focused investor and a non-governmental organization (NGO) is set to ensure the successful completion of WAF's expansion project in Manitowoc, Wisconsin. WAF, known for its production of aluminium and red metal castings, will utilize the grant to enhance its capacity to produce a variety of aluminium- and copper-based alloy castings for diverse industries. It's worth noting that this grant has come to fruition approximately one year after WAF's initial announcement of its expansion plans in Manitowoc. The $11 million New Markets Tax Credit (NMTC) will provide...
Aluminium USA is distinguished as the foremost exposition and technical symposium devoted to the aluminium sector. This event encompasses the entire spectrum of the industry, spanning from the initial stages, such as mining and smelting, to the intermediate phases, like casting, rolling, and extrusions, and ultimately extending to downstream processes, such as finishing and fabrication. Aluminium USA provides a platform for prominent suppliers and professionals within the industry to convene for in-person interactions, exhibits, state-of-the-art conferences, educational initiatives, and technology-driven networking prospects. Join the networking party at the prestigious Nashville Country Music Hall of Fame as the Aluminium USA 2023 event kicks off from October 25th to October 26th. It all...
According to the US Geological survey, the United States aluminium plates, sheets and bars exports to Mexico stood at 24,700 tonnes during July 2023, recording a month-on-month fall of 5.36 per cent from 26,100 tonnes. The export in July marked a fall for the second month in a row. In June, the export volume stood 10.92 per cent lower than 29,300 tonnes in May. On a year-on-year calculation, the United States aluminium plates, sheets and bars exports to Mexico during July 2023 reflected an increase of 69.18 per cent from 14,600 tonnes, found USGS data. From January to July 2023, the United States exported 175,000 tonnes of aluminium plates, sheets and bars to Mexico versus 88,000 tonnes during the corresponding period of the previous year. In July 2023, the United States total exports of...
The downstream aluminium industry was spotted with multiple affairs this week from October 16 to 20. While EOS launched its new Aluminum Al5X1 aluminium alloy, Novelis received a sum of $5 million from the Alabama Industrial Access Road and Bridge Corporation under ALDOT's administration for revamping the South Alabama Megasite. On the other hand, Aluminium Association of India (AAI) requested the government to provide rates for aluminium special economic zones and export oriented units (EOUs) under the RoDTEP scheme and thyssenkrupp Aerospace renewed aluminium components supply contract to the Boeing Company. Aluminium Association of India (AAI), an apex body representing the entire value chain of the Indian aluminium industry, has requested the government to provide rates for aluminium...
EOS has made an exciting announcement regarding the launch of its new Aluminum Al5X1 aluminium alloy. It was rumoured earlier this year that EOS would be releasing the high-strength alloy after showcasing sample parts at RAPID + TCT. The commercial availability of Al5X1 will begin in November for EOS M 290 users, followed by the EOS M 400-4 next year. According to EOS, the Al5X1 3D printing material exhibits a 14% elongation with an ultimate tensile strength of 410 MPa. The material requires only a single-step heat treatment with no Hot Isostatic Pressing, resulting in quicker and more cost-effective part manufacturing. Additionally, parts printed in EOS Aluminum Al5X1 can be electropolished and anodised with no limits to potential colour choices for cosmetic and corrosion-resistant...
Alro, one of the largest vertically integrated aluminium producers in Europe in terms of production capacity, has recently announced that it has signed a new multi-year agreement with Airbus, a leading aircraft manufacturer. Under the terms of the contract, Alro will supply aluminium flat-rolled products for the manufacturing of aircraft. This renewed contract was initially signed in 2016 , and both companies have agreed to continue their partnership. The production of plates for the aerospace industry is a crucial part of ALRO’s strategy to diversify its production of high and very high added-value aluminium products. This diversification has been made possible thanks to the company's constant investments in sophisticated technology. Over the past 20 years, ALRO has invested more than...
On October 18, 2023, PipeHawk PLC announced that its subsidiary, QM Systems Ltd, had secured a contract with JVM Castings Ltd. This contract involves designing, manufacturing, and supplying a suite of automated systems for inserting and assembling self-piercing and clinch nuts into various automotive aluminium castings. PipeHawk, a company headquartered in Hampshire, England, specialising in technology for the automotive, rail, aerospace industries, and highways, stated that this contract is expected to generate approximately GBP800,000 in revenue for QM. The project is slated for completion within PipeHawk's fiscal year, ending on June 30. The project will leverage QM's most recent automation process, which combines assembly with error-proofing mechanisms to ensure the accurate...
Novelis has been allotted a sum of $5 million by the Alabama Industrial Access Road and Bridge Corporation under ALDOT's administration for revamping the South Alabama Megasite. Novelis' aluminium plant in the area will undergo a proper renovation with the funding raised. The grant will fund crucial upgrades to Highway 287, such as resurfacing, widening, and drainage enhancements, as well as the construction of an industrial access road on-site, which is necessary to accommodate the anticipated increase in traffic flow. It's wonderful to see Baldwin County's efforts rewarded with this grant, and we look forward to continued progress and growth at the South Alabama Megasite. Baldwin County Commissioner James E. Ball commented: "This grant award from the Industrial Access Road and Bridge...
The commencement ceremony for Zhite Technology’s aluminium mold new material production line for 2023 was carried out on September 14 at the Xianning High-tech Zone. Huang Zuocai, a member of the Xianning High-tech Zone Party Working Committee and deputy director of the management committee, participated in the activity and announced the project. "The construction of the Zhite technology new material industry project with a total investment of 700 million yuan, the main construction of high-end, intelligent aluminum film new material production line, after completion and put into operation, is expected to reach 600 million yuan of annual output value, new tax revenue of 36 million yuan, new employment of 200 people," said Guo Duopeng, general manager of Hubei Zhite New Materials Co.,...
Martinrea International Inc. has publicised the signing of a strategic partnership with Yamada Manufacturing Co., Ltd., a renowned manufacturer of chassis, drive units, and powertrain components based in Gunma, Japan. This partnership will undoubtedly enhance Martinrea's manufacturing capabilities in Japan and create a new avenue for the company to showcase its expertise in the production of lightweight aluminium solutions for the automotive industry. Under the memorandum of understanding signed by both companies, Martinrea and Yamada will work together to tap into the Japanese market and jointly promote lightweight aluminium solutions within the automotive industry, particularly in the development of electric vehicles. Martinrea has experience in manufacturing high-performance parts with...
