
The environmental implications of a proposed aluminium smelter in Inola, Oklahoma, have come under scrutiny, with experts highlighting concerns over fluoride emissions, air quality and potential effects on local livestock and public health. At a special town meeting on Thursday, residents and town leaders heard the findings of an environmental risk evaluation commissioned by the town. The assessment was conducted by Jacobs Engineering Group, which was hired to examine the potential health and environmental effects of the proposed Oklahoma Primary Aluminum smelter, a joint project involving Emirates Global Aluminum and Century Aluminum. The facility is designed to produce up to 750,000 tonnes of aluminium annually. One of the key findings highlighted in the report was the estimated annual...
The global aluminium industry is facing an interesting contradiction, with bauxite production expanding, countries racing to establish domestic alumina refining capabilities, and China heading towards another record year of primary aluminium production. Yet, higher output does not necessarily translate into stronger pricing power, secure raw material availability or better market access. And evidently, the tension is becoming rippling across the entire aluminium value chain. Today we are going to connect the dots across the global bauxite, alumina and primary aluminium markets to examine how these developments may be today maybe five years from now intertwine into a singular market volatility. Bauxite supply: Guinea's pricing ambitions meet Ghana's processing plans Guinea produced almost...
Grow with
AL Circle

From January to October, the non-ferrous metals industry production of Jiangxi province achieved sustainable growth. Jiangxi produced 302,000 tons aluminium products during the last ten months, which increased by 3.4% compared with last year.

Much anticipation is being generated by the upcoming SL’s extensive use of aluminum in its structure and sheetmetal. Significantly lighter than its predecessor, it’s 89% aluminum, which makes it much more interesting to tuners, who don’t have to overcome a whole lot of mass to produce a high performance vehicle. For Mercedes, it’s an excellent way to offer the same performance expected of the SL with smaller engines, thus satisfying customers and CAFE and emissions standards at the same time. Mercedes uses a combination of cast aluminum and hydroformed aluminum for the structure to meet the exacting crash and NVH standards that the company is known for. And since aluminum is a material that has been extensively recycled in various products, Mercedes has also introduced a few recycled...

Mining and quarrying saw the most growth of all sectors in the economy during the July to September quarter of 2011, with an increase of 7.5 per cent. This growth contributed to the economy growing by 0.5 per cent for the quarter under review. It is also projected that the economy will grow by between 1 per cent and 2 per cent for the October to December quarter. Director General of the Planning Institute of Jamaica (PIOJ), Dr. Gladstone Hutchinson, explained that the growth in the mining and quarrying industry largely reflected the continued impact of the re-opening of the Windalco Ewarton alumina plant, and increased bauxite production by Noranda Bauxite Company, facilitated by increased global demand. "Total bauxite production increased by nine per cent during the review period,...

Orissa State Pollution Control Board (OSPCB) has warned National Aluminum Company (Nalco) over the frequent leakage polluted water from the ash pond of the company’s captive power plant at Angul. The pollution watchdog cautioned that it would stern action against the company if it fails to manage its ash disposal system effectively. OSPCB advised the aluminium major to supply the ash to the nearby coal fields in Talcher through pipe for filling up the pits. In October, OSPCB had sent a notice to Nalco to stop using one of its two ponds as an inspection team found cracks in one of the ponds.

China has agreed to a new $4 billion loan to help Venezuela boost its oil output and will also help upgrade power plants and increase production of iron and aluminium. China has swiftly become Venezuela's biggest foreign lender in recent years, and has previously agreed to more than $32 billion in loans. President Hugo Chavez's government is repaying the loans with oil shipments.

Leading foil tray manufacturer Nicholl Food Packaging is one of the companies behind a major recycling and awareness–building programme undertaken by Alupro, the Aluminium Packaging Recycling Organisation, which has enabled foil to qualify for the ‘Widely Recycled at Recycling Points’ labelling under the British Retail Consortium’s On-Pack Recycling Label scheme. The Aerofoil programme was launched in 2009 to help local authorities add foil and aerosols to their collections and promote recycling services. It was funded by Alupro foil converter member companies, the largest of which is market leader Nicholl. Additional funding was provided by the British Aerosol Manufacturers Association, Unilever and Tata Steel. The ‘Widely Recycled at Recycling Points’ recognition has been achieved...

Chairman of the Aluminum Association's Board of Directors and President of Nichols Aluminum, Thomas Brackmann, announced the appointment of Jean Simon, President of Primary Metal for Rio Tinto Alcan to the Chairmanship of the Aluminum Association's Executive Committee. Jean Simon has been part of the Rio Tinto Alcan team since 1979 holding various senior management roles including: President of Primary Metal North America (2006-2011), President of Primary Metal Quebec and USA (2005-2006,) President (2004-2005) and Vice-President for Operations (2002-2004) of Rio Tinto Alcan Primary Metal Saguenay-Lac-Saint-Jean, General Manager of Vaudreuil Works (2001-2002,) General Manager of Laterrière Works (2000-2001,) and General Manager of Isle-Maligne Works (1998-2000.) From 1994 - 1997, he served...

Liaoning Hongwei District’s aluminium industrial cluster has achieved sales revenue of 6.81 billion RMB in the first three quarters of this year. Industrial aluminium profile is the most competitive industry of Hongwei District.Relying on China Zhongwang, the district has invested 6 billion RMB this year to develop the aluminium extrusion industry. The district has also invested a lot of money to develop the R&D center. It is aiming at building a world class aluminium processing base in 3 to 5 years.

Shandong Huayu Aluminum & Power Co.,Ltd located in Linyi City, Shandong Province,has stopped using coke oven gas and has turned to natural gas as their industrial fuel. The factory director explained that aluminum ingots and aluminum bars are their main aluminum products.Using natural gas will cost much but this kind of clean energy can increase production by 1000 ton/year,and will create ten million yuan as profits for the company. At present, there are more and more industrial enterprises turning to natural gas.

Siemens VAI Metals Technologies has received an order from Novelis Korea to extend its aluminium rolling mill in Ulsan. A three-stand finishing line will be added to the plant and the first strip will be rolled in July 2013. The project is aimed at boosting capacity and enabling future production of high-grade aluminum strip. The hot rolling mill had previously consisted of a single reversing stand with two coilers and secondary systems. Siemens is supplying the mechanical and electrical equipment for the three-stand tandem rolling mill including a coiler and a coil handling system. In future, the existing reversing stand will function as a roughing mill. Lightweight cropping shears will also be installed in the entry to the finishing line.

Gov. Scott Walker was in Manitowoc on Friday to commend Wisconsin Aluminum Foundry on their current investment at their plant, which has been in Manitowoc for more than 100 years. Wisconsin Aluminum Foundry is in the middle of a two-year, $7.5 million project that is expected to add about 43 new jobs. State aid was used for this project and locally, WAF accepted a loan from Industrial Development Revolving Loan program, set up to aid local businesses for expansion of their facilities.

One of the world's leading aluminium manufacturers, Sapa Group of Sweden announced that it has established its third technology centre; Sapa Technology (Shanghai), in Jiading, Shanghai. Jan Strid, General Manager of Sapa Technology Global, Johan Menckel, President of Sapa Profiles Asia , and Colin Xu, Managing Director of Sapa Heat Transfer (Shanghai) Ltd. attended the opening ceremony. Currently Sapa Group has in total three technology centres globally; Sapa Technology in Finspång Sweden, Sapa North America Tech Centre in Portland, Oregon USA and now Sapa Technology (Shanghai). It's newest technology establishment shares the same important strategic position within the group as the other two, and contributes to strengthening the group's leading position in the aluminium extrusion and...

Rio Tinto today received Canadian Competition Bureau clearance for its offer, made through an indirect wholly-owned Canadian subsidiary, to acquire all the common shares of Hathor Exploration Limited ("Hathor") for C$4.70 in cash per common share. The Commissioner of Competition issued a "no action letter" which constitutes compliance with all requirements of the Competition Act (Canada) in relation to Rio Tinto's offer for Hathor. Rio Tinto's recommended offer values Hathor at approximately C$654 million on a fully-diluted basis and represents a premium to the unsolicited revised offer of Cameco Corporation's of C$4.50 per common share of Hathor made on 14 November. Hathor's board of directors unanimously recommends that Hathor shareholders accept and tender their common shares to Rio...

SINGAPORE: A bearish target at $2,029 per tonne is unchanged for LME aluminum, as it is riding on a downward wave (3)-3. This wave will unfold towards the 161.8 percent Fibonacci projection level, based on the length of the wave (1) and the peak of the wave (2) at $2,165. The metal has broken twice below a support at $2,077.75, provided by the lower trendline of a triangle, significantly increasing the chance of a further fall to $2,029. Resistance is at $2,102, a rise above which will extend to $2,129. No information in this analysis should be considered as being business, financial or legal advice. Each reader should consult his or her own professional or other advisers for business, financial or legal advice regarding the products mentioned in the analyses.

HSBC’s November China PMI contracted unexpectedly. Demand was weak at major consumption countries. Disappointing results of German bond sales added to worries that the Euro zone debt crisis is spreading into core countries of the region. As a result, investors sold their commodities to buy the safer US dollar, thereby driving the US dollar index to above 79. Mixed economic data from the U.S. failed to improve the pessimistic market sentiment. The LME aluminum stock surged 14,300 mt overnight. The strong selling wave dragged LME aluminum prices to USD 2,003/mt, a new yearly low, during the day. The metal slightly rebounded at the tail of trading and closed at USD 2032.5/mt losing 2.52%. SMM expects LME aluminum to test resistance at USD 2,050/mt and fluctuate between USD 2,005-2,055/mt...

The National Exhibition Centre in Birmingham has adopted a number of recycling schemes as part of its drive to become one of the UK’s greenest venues. Following on from the installation of a £330,000 ‘waste pre-treatment centre’ in 2009 that aims to recycle 50% of the venue’s waste by 2013, the centre has teamed up with Overton Recycling in Stourbridge to recycle its waste fridges and other electrical equipment. One of the NEC’s policies is that waste products should travel no more than 30 miles from site for processing; so Overton was chosen to help the venue meet its targets. Fridges will be de-gassed there and shredded with the resulting different waste streams – including copper, aluminium and plastic - recycled. Steve Cartmell, waste manager at the NEC, said: “Our ambitious targets...

Ghana’s producer-price inflation rate fell for the first month in October as mining and quarrying costs decreased. Inflation eased to 16.8 percent from 19.6 percent a month earlier, Grace Bediako, head of the Ghana Statistical Service, told reporters in Accra, the capital, today. Prices fell 0.9 percent in the month, she said. The increase in mining and quarrying costs, which account for 14 percent of the overall index, slowed to 31.6 percent from 50.7 percent in September, Bediako said. Ghana mines bauxite among other products. Manufacturing costs, which make up 70 percent of the index, increased 16.9 percent in October, compared with 16.6 percent, while utility costs rose 8 percent from 7.7 percent in September, Bediako said.

The promise for jobs continues to be made at the PPP/C rallies and meetings in Linden and according to Campaign Manager for Linden, Andrew Forsythe,in the next five years the PPP/C can assure residents of over a thousand jobs in various sectors. He said that there will be major expansion in the bauxite industry both at Linden and Aroaima, Berbice River.