
Ball Corporation is increasing its 2026 capital expenditure to approximately $650 million, up from $475 million last year, as rising demand for aluminum beverage cans absorbs excess manufacturing capacity across the industry. The US packaging manufacturer is expanding production in North America and Europe while preparing additional capacity to meet growing customer requirements in 2027 and beyond. Speaking during the company's third-quarter earnings call, chief executive Ron Lewis said the industry had largely absorbed its surplus manufacturing capacity, prompting beverage brands to seek greater certainty over packaging supplies. “I think the market has soaked up almost all of the industry excess capacity,” he stated. Ball reported a 4.7% increase in global aluminum packaging shipments...
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
Grow with
AL Circle

Orbite Aluminae Inc. CA:ORT -3.46% (the "Company") is pleased to announce that it has reached three important milestones in its development. It has recently opened a new laboratory facility in Laval, Quebec, which will serve as the Company's principal laboratory. It is also proud to have secured the support of the Micmac Nation of Gespeg in regards to the Company's alumina plant project in the Gaspesie region. And finally, Orbite has been issued a new Canadian patent for its technologies and has filed for two new patents in the U.S. New laboratory opens The Company has inaugurated its principal laboratory, which will support its upcoming production of high-purity alumina and future production of metallurgical-grade alumina. Housed in the Laval Biotechnology Development Centre, this modern...

Century Aluminum Limited, former owner of St Ann Bauxite Company which sold out its local operations during the bauxite downturn, says it is mulling re-entering the local alumina sector under partnership to set up a 1.5-million tonne alumina plant. The investment would signal a further rebound of the sector damaged since the global recession. "This is still in the analysis phase, and it is too early to determine when major construction might begin," said Lindsey Berryhill, manager, corporate communications at Century Aluminum Company. "We are unable to disclose the estimated investment numbers at this time, but I will keep you informed of our progress," Berryhill said via email. Century Aluminum was formed in 1995 by Glencore International of Switzerland as a holding company for its...

West Virginia may offer a tax break worth up to $20 million annually to help Century Aluminum restart its Jackson County smelter, but officials say any such aid depends on retirees resolving an impasse over their revoked health benefits with a Thursday vote. Lawmakers, aides to Gov. Earl Ray Tomblin, company officials and other interested parties are discussing a tax break proposal similar to legislation introduced in 2010. That unsuccessful bill aimed to offset the Ravenswood plant's electricity costs. The credits would benefit the utility in exchange for it setting special, reduced rates for the plant that would be triggered by weak aluminum prices. The Jackson County plant laid off about 650 workers when the California-based company idled the facility in 2009. But Century's subsequent...

Full year figures for European output of alufoil in 2011 showed a modest decline in overall production levels, reflecting the cautious outlook throughout the European economic markets. However exports from Europe remained steady according to figures released by the European Aluminium Foil Association (EAFA). Total production fell back by 5.2% to 801,900 tonnes (2010: 846,300 tonnes), with thinner gauges declining by 7.9%. Thicker gauges fared much better registering only a 2.4% drop from 2010 levels. Exports held up better, down by just 0.7%. EAFA’s Roller Group Chairman Manfred Mertens commented on the outlook: “The general economic uncertainty affects the whole supply chain. Most retailers and fillers are placing orders on a ‘just in time’ basis and in lower volumes. Forecasting future...

A California company that acquires and converts abandoned industrial sites has paid $1.5 million for the sprawling former Kaiser-Mead smelter operation in north Spokane. New Mill Capital LLC plans to convert some of the remaining buildings on the 183-acre site into usable industrial locations for new tenants, said Gregory Schain, executive vice president of New Mill. Other former Kaiser buildings, including the massive buildings holding aluminum potlines, will be gutted and torn down, Schain said. New Mill is a subsidiary of Industrial Realty Group LLC. The IRG website lists a portfolio of more than 50 million square feet within 70 projects across the United States. Kaiser shuttered the plant in 2000 after producing aluminum there for more than 50 years, at times employing as many as...

Alcan (Tianjin) Alloy Products Company Ltd. Holds 1st Annual Meeting in Xiamen, ChinaAlcan Cable, a business unit of Rio Tinto, recently held its first annual China meeting in Xiamen, China. Attended by employees, management, and notable industry experts, the focus of the meeting was the promotion and sale of STABILOY? aluminium alloy cables. “The Alcan Cable (China) annual meeting addressed the company’s expectations for success, social responsibility and passion for the STABILOY brand in order to promote and sell STABILOY cable aggressively in China,” said Alex Tham, Managing Director, Alcan (Tianjin) Alloy Products Company Ltd. Jack Miller, President of Alcan Cable, attended the meeting and presented the sales awards at the company dinner and celebration. “Our China operations exceeded...

Flex Art Foil Private Limited, the wholly owned subsidiary of Ess Dee Aluminium Ltd will be starting an additional manufacturing unit at Daman to carry out the activities of printing aluminium foils based packaging products. The Ess Dee Aluminium Ltd stock was trading at Rs.170.40, up by Rs.15.30 or 9.86%. The stock hit an intraday high of Rs.182.80 and low of Rs.156. The total traded quantity was 1.91 lakhs compared to 2 week average of 1.43 lakhs.

President Barack Obama toured Skana Aluminum Co. about one year ago. If Obama came back to the Mirro Drive manufacturing plant he would find quite a few changes — including "SPIT" and "SAP" — designed to satisfy customers for decades to come. "Compared to a year ago, the plant is running very well," Tom Testwuide Sr., Skana's chief executive officer and board chairman, said. "Now, we are looking at future efficiencies and quality improvements." The mill employs 108 individuals supplying coil metal and other products, about 56 million pounds last year, for customers nationwide. They turn the aluminum into something they sell, like the cookware emerging from Tramontina USA, Skana's next-door neighbor under the same roof at the mammoth plant built in the 1950s. "The level of hard work and...

LME three-month aluminum futures closed down USD 28/mt or 1.24% at USD 2,227/mt on Wednesday as China’s signal to maintain property curb boosts dollar buying and weighs on base metals. The light metal lost all previous-day gains after losing support at the 5-day moving average. China’s property curb vow and persisting worries towards the European debt crisis will continue weighing on metals today. As such, SMM expects LME three-month aluminum to move between USD 2,200-2,250/mt today as it tests support at the USD 2,200/mt mark. The most active SHFE aluminum contract for May delivery is expected to test support at RMB 16,100/mt and hover between RMB 16,100-16,190/mt. Spot aluminum is expected to trade at discounts or premiums within RMB 20/mt over the SHFE current-month aluminum contract...

The automotive products group of Lydall, Inc. LDL +0.33% announced today that its constrained layer damping (CLD) heat shield product won the 2012 AluFoil Trophy in the Technical Innovation category. "The European Aluminum Foil Association judges liked the simple, but effective use of aluminium to simultaneously provide heat shielding and reduce parasitic noise. The designer had to 'think outside the box' to come up with a solution and used aluminium foil to great effect, showing a great technical understanding of the material and its capabilities," commented Antoinette Devine, head judge for this year's Alufoil Trophy and global packaging consultant for SABMiller. The product was a result of a co-development project between Novelis Lüdenscheid, Packaging & Converting and Lydall's Applied...

Aluminum Enterprises realized that traditional technology and profit points were hard to develop and expand enterprise. The author thinks the following aspects can help to improve products competitiveness. Through 20 years of development building profiles field has cultivated a lot of site technicists and industrial workers and accumulated rich practical experiences, but the product technical additional value still with a lower level. The improvement of products competitiveness is a must for breakthrough existing technical obstacles. 1. To develop new products of energy-saving aluminum windows and doors and curtain wall. The tight energy resource supply situation in China can not be eased in short-term, so new products development should focusing on this topic. 2. To improve mould design,...

A California company that acquires old industrial locations has paid $1.5 million for the former Kaiser Mead smelter operation. New Mill Capital, LLC, plans to convert some of the existing buildings on the 183-acre North Spokane site into usable industrial locations for new tenants, said Gregory Schain, executive VP of New Mill. Other buildings will have to be gutted and taken down, he added. New Mill is a subsidiary of Industrial Realty Group LLC, a California company that buys and develops excess commercial and industrial properties across the country. Its website said the firm has a portfolio of over 80 million square feet within 70 projects across the United States. The plan is to turn the site into a north Spokane industrial park, Schain added.

Bedford-based Midas Pattern Company claims particular expertise in the manufacture of cast aluminium rotational mould tools for the manufacture of large, rugged and robust components in many sectors including sports and leisure, marine and retail promotion. Examples of projects are outdoor children's playground equipment and permanent dockside equipment for yachts and pleasure craft. By combining the latest three-dimensional CAD and CNC technologies with the skills of traditional toolmakers, the company looks to deliver “the best of both worlds” to its rotational mould tool clients. In the case of very large tooling, Midas engineers break down the original large configuration (as large as 4m long in some cases), which would be very expensive to cast in one piece (and also challenging in...

Lexington is participating in the 2012 Cans for Cash City Recycling Challenge, a nationwide contest that challenges U.S. cities to recycle the most aluminum beverage cans through March 31. To participate, recycle cans by: using the blue residential Rosie recycling carts (to request a Rosie if city collection is available, call LexCall at 311 or enter a service request); use household recycling cart for private trash collection; drop off cans at the LFUCG Recycling Center at 360 Thompson Road or another drop-off location; take cans to scrap metal buyback centers; or take cans to schools, workplaces, apartments or churches that participate in Lexington's recycling program. The number of aluminum cans collected and recycled will be counted and compared to the number of cans recycled by other...

Noranda Aluminum Holding Corporation (NYSE: NOR - News) (“Noranda”), a leading North American integrated producer of value-added primary aluminum products, announced today a public secondary offering of 10 million shares of common stock (the “Shares”) by certain investment funds affiliated with or managed by Apollo Management VI, L.P. (“Apollo”), pursuant to an underwriting agreement among the Company, Apollo and UBS Investment Bank, as underwriter, providing for the sale of the Shares. Apollo has granted to UBS Investment Bank an option to purchase up to 1.5 million additional shares of common stock. Noranda will not receive any of the proceeds from the sale of Shares by Apollo. The offering will be made pursuant to Noranda’s registration statement on Form S-3 (File No. 333-172640) filed...

Two contracts have been awarded for the expansion of the Alcoa and Ma'aden aluminum complex under construction at Ras Al Khair, Saudi Arabia. Texas-based Fluor won the engineering, procurement and construction contract. Germany's SMS Siemag will supply the mill and heat treatment line equipment. The mill will have the capacity to produce about 100,000 tonnes of product per year, including automotive heat-treated and non-heat-treated sheet, building and construction sheet and foil stock sheet. Depending on demand, the line will start production at the end of 2014. "These new capabilities will help establish downstream industries in Saudi Arabia using aluminium that has been mined, refined, smelted and rolled in the Kingdom," Khalid Mudaifer, Ma'aden's president and CEO, told reporters. The...

National Aluminium Co. (NACL), India’s third-largest producer, is delaying the restart of the shuttered 10 percent of its capacity on signs the economy is stalling in China, the biggest user of the light metal. Aluminum prices on the London Metal Exchange are being dragged down by the uncertain outlook for Chinese growth, Chairman B.L. Bagra said in a telephone interview. The recent price rally, driven by global output shutdowns, couldn’t hold above $2,300 a metric ton, the lowest level required for National Aluminium to operate at full capacity, he said. China last week reported its biggest trade deficit in at least 22 years as government data also showed the world’s second-largest economy had the weakest January-February factory- production gain since 2009. Aluminum in London, which has...

Emirates Aluminium (Emal) is the host sponsor of the World Aluminium Conference set to be held in Abu Dhabi from April 30 to May 2. Saeed Fadhel Al Mazrooei, president and CEO, Emal, said: “The region is now a serious player in the global aluminium market. With the world coming to Abu Dhabi, it is the perfect opportunity to showcase the advanced facilities we have which enable us to provide a reliable source of quality products to customers around the world.” Al Mazrooei will deliver a key note speech at the event, a statement from Emal said. The issues for discussion include strategic threats facing producers, the impact on demand of the economic climate, and downstream opportunities in the Middle East, the statement said. Conference organisers, CRU, will also hold a number of workshops...