
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

Kaiser Aluminum Corporation announced today that it has priced its previously announced offering of $225.0 million in aggregate principal amount of 8.25% senior notes due 2020 (the "notes") in a private transaction that is exempt from the registration requirements of the Securities Act of 1933 (the "Act"). This represents an increase of $25.0 million over the amount previously announced. The notes will be guaranteed by each of Kaiser Aluminum's existing and future domestic subsidiaries that is a borrower or guarantor under Kaiser Aluminum's revolving credit facility. Kaiser Aluminum intends to use the net proceeds from the offering of the notes for general corporate purposes, which may include, among other things, acquisitions. The consummation of the offering of notes is expected to be...

Sunidhi Securities is bullish on Parekh Aluminex and has recommended buy rating on the stock with a target of Rs 390 in its May 17, 2012 research report. "PAL, a Mumbai based company established in 1994, is engaged in the production and sale of Aluminium Foil Containers (AFC) together with lids or covers and Aluminium Foil Rolls (AFR). It came out with its IPO in 1997. PAL is the largest manufacturer and exporter of Aluminium Foil Containers (AFC) and also one of the biggest manufacturers in Aluminium Foil Rolls (AFRs) and Aluminium Lids, in India. Its two plants are located at Union Territory of Dadra and Nagar Haveli, India. From January 2009, PAL has been adjudged as 100 per cent EOU." "PAL manufactures these products with various sizes, shapes and microns. Aluminium Foil containers...

Schools across America recycled more than 4.5 million aluminum beverage cans in the second year of a national recycling competition sponsored by the U.S. can industry—nearly double last year’s effort. The Great American Can Roundup raised $100,591 for school activities and local charities across the country. More than 790 schools from all 50 states participated in the second annual contest, which runs each year from Nov. 15 (America Recycles Day) to April 22 (Earth Day). “By any measure, this year’s program was a tremendous success,” said Robert Budway, president of the Can Manufacturers Institute (CMI), the trade association representing can makers and their suppliers. “These students recycled more than 65 tons of cans. Their hard work not only helped protect the environment, it raised...

UC Rusal boosted aluminum output 3.5% YoY to 1.049 million tonnes in the Q1 of 2012. However in response to continued uncertainty in the global economy, Rusal is currently considering the curtailment of 300,000 tonnes to 600,000 tonnes of high cost smelting capacity starting from the H2 of 2012 with corresponding alumina production to be possibly idled in order to achieve the production capacity balance. A company presentation for investors said that the drop in output over eighteen months could lead to the shutting down of capacity which will not be revived. Earlier company management said that a contraction would likely affect the company's plants located in the European part of Russia that has high production costs. Mr Vladislav Solovyev first deputy DG of Rusal said that the most loss...

The most active SHFE aluminum contract opened at RMB 16,020/mt and settled up RMB 20/mt or 0.13% at RMB 16,020/mt. Its moving band was RMB 16,000-16,065/mt. Strong support was found at RMB 16,000/mt. Resistance at the 10-day moving average also remained strong though. Total transacted contracts of the day were only 8,332 lots. Spot aluminum traded at RMB 15,990-16,020/mt in Shanghai, at discounts of RMB 10-40/mt over the current-month SHFE aluminum price. The trading band in Wuxi is RMB 16,010-16,030/mt and is RMB 16,000-16,020/mt in Hangzhou. The current-month SHFE aluminum contract stabilized above the 5-day moving average and trading activities were little changed. The mainstream traded price struggled at RMB 16,000/mt. Some quality ingots were traded at higher prices but also saw...

LME aluminium shook off a disappointing Philadelphia Fed manufacturing index to close higher and outperform the other base metals and energy complex, said the global leader in aluminium industry analysis and outlook, Harbor Intelligence. Analyst with Harbor Intelligence stated that, “Physical demand for primary aluminium continued to improve in China and also in North America. Aluminium prices in China have entered backwardation mode (spot price is higher than immediate futures contract), which is consistent with declining domestic inventories and increasing metal tightness.” “Chinese net imports of primary aluminum in the first quarter were bigger than in all 2011. The arbitrage to import metal from abroad has widened to $180 per mton after VAT considerations. Demand for automotive...

Aluminium is one of the most consumed base metals and, hence, holds a significant place in the metals space. Rapid urbanisation and industrialisation in the emerging and developing economies are set to boost the demand for the metal. Aluminium finds application in almost everything, from transportation and packaging to construction. On the domestic front, the power sector is the largest consumer, with a 42% share in aluminium consumption, followed by construction (17%), transport (14%), packaging (10%) and consumer durables (8%). Globally, transportation accounts for a 35% consumption share, followed by packaging (23%), construction (18%) and energy (7%). While the global demand rose by around 5% a year during 2001-2010, in India, the annual demand jumped by a whopping 12% in the same...

Commodities have borne the brunt of the Chinese slowdown and European politico-economic crisis. Prices of manganese, iron ore, zinc and aluminium have dropped 10-25% over the last one year, impacting companies that process or mine these metals. But Indian metals and mining companies may weather this phase better, with their low-cost structure. Here`s an assessment of their prospects. Iron Ore The prices of high-grade iron ore imported by China from Australia are down by 20% over the last one year. This dip is attributed to the slowdown in steel production growth in China and drop in European consumption. For India, global iron ore prices serve only as a directional cue. India`s largest iron ore miner, NMDC, sells ore at a discount of 35-45% to international ore of similar grade. Despite...

London-listed Vedanta Resources, which controls stake in India’s copper to aluminium-maker Sterlite Industries, on Thursday said its consolidated net profit fell 46% to $387 million for the fiscal year 2011-12 as it took a $400-million mark-to-market hit on the volatile rupee, paid highest interest on loan taken to purchase oil refiner Cairn India and had to cut down aluminium production at its Orissa plant due to power shortages. “The outlook for natural resources remains robust,” chairman Anil Agarwal told analysts after announcing the results in London. “Vedanta, with a low-cost structure and an Indian asset base, is well-positioned to serve the country.” Operating profit or earnings before interest, tax, depreciation and amortisation (Ebitda) rose 13% to $4 billion with oil and gas...

State-owned NALCO (National Aluminium Company) is expected to report a profit after tax of Rs 120 crore for the fourth quarter of FY12, down 61% as compared to Rs 305.3 crore in a year ago period, according to CNBC-TV18 poll. Net sales are seen going down 6% at Rs 1,674.5 crore from Rs 1,787.5 crore year-on-year. EBITDA too is seen falling 59% year-on-year to Rs 172.1 crore for the January-March quarter of 2012. EBITDA margin is expected to fall at 10.3% versus 23.3% during the same period. On quarter-on-quarter basis, profit after tax of the company is likely to jump 2.3 times and EBITDA 3.8 times for the quarter ended March 2012. Net sales are seen going up by 17%. In Q3FY12, NALCO delivered a poor set of results: EBIT was negative as 120 pots out of 960 remained closed during 3QFY12...

RUSSIAN aluminium giant Rusal has accused the Gillard government of hobbling the once high-growth alumina industry through the July 1 introduction of the carbon tax. It argues the carbon tax will force shrinkage in the industry's share of growth in the global market for alumina, an intermediate product used in producing aluminium. "Since the design of the tax and the announcing of its implementation, global circumstances have changed dramatically and Australia now faces an almost impossible task of competing with new entrants to the industry," Rusal Australia chairman John Hannagan said. Rusal is a 20 per cent partner with Rio Tinto in one of the world's biggest alumina refineries, at Gladstone (Queensland Alumina Ltd, QAL). Mr Hannagan said the design of the carbon tax would hand future...

Non-ferrous metals producer Hindalco Industries plans to start its 1.5 million tonnes per annum (mtpa) alumina refinery in the eastern state of Orissa by January 2013, a senior company executive said on Saturday. It also expects to start mining bauxite in the state from October this year, said Suryakant Mishra, chief executive of Utkal Alumina International Ltd (UAIL) a wholly-owned unit of Hindalco. "We are planning to commission the refinery by December end or mid-January. Mining will start by October," he said. Mishra said the company initially aims to mine 4.3 to 4.4 mtpa annum of bauxite to supply the refinery, though it has permission to mine 8.5 million tonnes. Hindalco, part of the Aditya Birla Group, is trebling aluminium production capacity in India to 1.9 million tonnes by 2013...

One of the largest engineering, procurement and construction (EPC) companies in the world, Bechtel, has recognized global joint integrity specialist and engineering services company Hydratight as a key supplier. Hydratight was honoured recently among 47 vendors for its performance during the 2011 year, as a result of nomination by Bechtel’s project management teams in the field. Bechtel annually works with an estimated 13,000 vendors on its projects globally, which puts Hydratight in the top one percent of suppliers to the global EPC giant, which has annual revenues exceeding $US32 billion. Bechtel is building Gladstone’s three LNG plants, and has undertaken major projects such as expansions at PWCS and Rio Tinto’s Comalco Alumina Refinery. Hydratight, headquartered in the US, employs...

Already in use on four continents in a broad range of harsh climates, 3M Aluminum Conductor Composite Reinforced (ACCR) has now been installed in Siberia, serving one of the region's largest cities, Irkutsk. Irkutsk Electronetwork Co. chose the overhead conductor as a way to avoid tower construction or right-of-way expansion while nearly doubling power transmission to the city's central district, where growing demand was putting a severe strain on capacity, according to the utility. 3M ACCR is a lightweight, low-sag, high-capacity conductor that can carry twice the current or more of conventional steel-core conductors of the same diameter, on existing towers, thereby helping utilities circumvent problems in crowded urban settings and environmentally sensitive areas. Its low-sag...

Rising demand for beverage can in Cambodia is making way for another beverage can plant in the country. Headquartered in Philadelphia, Pennsylvania, Crown has planned to construct a new aluminum beverage can manufacturing facility in Sihanoukville, Cambodia. The plant helps to meet the rising demand for the packaging products in the region. Sihanoukville is located on the Gulf of Thailand and it is Cambodia’s major commercial port. The new plant will be the company’s second beverage can facility in Cambodia and it will house several can production lines. It will have an initial aluminum can manufacturing capacity of 725 million two-piece 33cl units per year. The Sihanoukville plant is anticipated to commence operation in Q3 of 2013. The President of Crown Asia-Pacific, Jozef Salaerts,...

Three key regions of the world; North America, Europe and China, are displaying three fairly different outlooks for traders of nonferrous scrap metal. The North American market, especially the United States, is in fairly decent shape. Manufacturing has steadily improved, and movement and prices for most nonferrous metals have held up. China, which has generated significant concern as the country has been showing signs of slowing down, continues to be somewhat active for copper and stainless steel, although there are mixed signals for some metals. The European market, which has been struggling with economic problems in many pockets, is proving to be the most challenging region for the scrap metal industry. Overall, most nonferrous metals are in a bit of a tough patch, with the continuing...

Western Metals Recycling, a Utah-based subsidiary of Nucor, on Wednesday will open a 24,000-square-foot drive-through metals recycling facility at its headquarters, 4201 W. 700 South in Salt Lake City. The recycling center will buy ferrous scrap, as well as common household nonferrous scrap metal items such as aluminum, copper and brass products. Nonferrous is a term that refers to metals other than iron and steel. To use the facility, those with metals to recycle need only drive up, take their recyclables out of their vehicles and weigh the materials. A receipt will be issued that can be used at an ATM-like machine at the facility that dispenses cash. Western is one of the largest scrap brokers/processors in the country. It employs 300 and operates nine recycling facilities in Utah,...

Aluminum buyers in Japan, Asia’s biggest importer, were asked to accept a 57 percent increase in fees starting in July, as supply decreased after smelters cut output and China boosted purchases. A producer offered to sell aluminum at $200 a metric ton over the London Metal Exchange cash price for the three months through September, an increase from the $127 surcharge this quarter, said three executives involved in the negotiations. They declined to be identified because the talks were private. Other producers have yet to make offers, they said. Premiums are poised to surge as demand from the auto and construction industries grows amid rebuilding in Japan after last year’s earthquake and tsunami. The nation’s gross domestic product rose an annualized 4.1 percent last quarter from the final...