
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

MHM Metals Limited confirms that salt cake and dross recycling operations in Geelong continue to perform well. Daily operating tonnages are continuing to exceed incoming material allowing reduction in our current stockpile of partly processed material. A recently announced trial of small changes to the salt cake recycling process has been very successful. These changes will be implemented on a permanent basis following the delivery and installation of necessary equipment, expected no later than the second week of June 2012. These small changes relate to the handling of material in the process. When installed we expect the Geelong facility to operate at 60,000 tonnes per annum of combined salt slag and dross. MHM and Alcoa are exploring mechanisms to enable MHM to commence the processing...

Aluminium Bahrain B.S.C. (Alba)'s commitment to broadening the benefits of state-of-the-art cardiac care treatment to Bahrain residents and supporting the development of advanced health care services in the kingdom provided the key incentive behind Alba's recent donation towards Mohammed bin Khalifa bin Salman Al Khalifa Cardiac Centre. The Chairman of Alba's Board of Directors, Mahmood Hashim Al Kooheji met the Director of the Centre, Dr. Raisan Hamood Al Badran in early May to present the cheque on Alba's behalf as well as assure Alba's continuing support to the Centre. The Mohammed bin Khalifa bin Salman Al Khalifa Cardiac Centre - part of the Bahrain Defence Force Hospital (BDF) - has a well established reputation for its highly specialised cardiac care facilities, the latest...

Angel Broking is bearish on National Aluminium Company (NALCO) and has recommended reduce rating on the stock with a target of Rs 54 in its May 21, 2012 research report. “For 4QFY2012, National Aluminium’s (Nalco) profitability was significantly above our expectations; however, we recommend Reduce on the stock. For 4QFY2012, Nalco’s net sales declined by 1.9% yoy to Rs1,753cr (below our estimate of Rs2,524cr). The aluminium segment reported a decline of 11.4% yoy in its revenue to Rs1,262.71cr and loss of Rs16.47cr in its EBIT.” “During the quarter, raw-material cost as a percentage of net sales stood at 19.2% compared to 14.8% in 4QFY2011. Further, power cost as a percentage of net sales stood at 29% in 4QFY2012 compared to 26.2% in 4QFY2011. Hence, EBITDA decreased by massive 32.3% yoy...

The US May Michigan Consumer Confidence climbed to a new high since October 2007, beating expectations. However, debt woes of Greece and Spain continued to weigh on market. LME aluminum hit a high of USD 2,030/mt and fell back to settle up only USD 4/mt or 0.2% at USD 2,014/mt. Strong pressure was felt at the 10-day moving average while strong support showed at USD 2,000/mt. Positions increased slightly by 412 lots. Latest LME aluminum stocks dropped 12,425 mt to 4,943,900 mt. Though European debt worries will not easily fade, improving consumer confidence in Europe and the US will boost commodities. LME aluminum is expected to struggle at the 5-day moving average and hover between USD 2,010-2,030/mt. The most active SHFE aluminum contract for September delivery should test support at RMB...

Almost 350 workers at the Kurri?Kurri aluminium smelter in NSW have become pawns in the shouting that masquerades as public policy debate in Australia in 2012. The facts of the smelter’s closure and the cost pressures that this and other Australian businesses face are reasonably clear. Interpretation of the facts and the overlay of politics make things less clear, and shining some light might be useful. Aluminium smelting in Australia, like other light metals manufacturing, has been politically charged for decades. Electricity costs are the major driver of aluminium smelter plant profitability and location decisions. Most Australian producers have generally had low costs by global standards because the price they have paid for electricity has been low and has also been subsidised by...

The deregulation of the electricity industry is emerging as an increasingly important factor in the future of Australia’s struggling aluminium industry. Power prices were named as a second-tier issue last week when Norwegian firm Norsk Hydro said low metal prices and the high Australian dollar were the main reasons behind its decision to close the 43-year-old Kurri Kurri smelter. Green advocates of renewable energy have long criticised aluminium smelting as a drain on the economy, but pro-industrial academics say the aluminium industry can justify its discounted power bills. Professor of Engineering Mathematics at Swinburne University of Technology, Geoffrey Brooks, said the description of aluminium as ‘‘congealed energy’’ had a degree of truth given the amount of electricity it took to...

There are signs of increasing momentum in Chinese aluminum-smelter cutbacks, said Barclays Capital in a commodities research note. Some 500,000 to 700,000 metric tons of capacity per year has reportedly been shuttered in the top-producing province of Henan. “More than half of smelters in Henan purchase their power from the grid and so have higher costs than smelters in northwestern provinces like Xinjiang, where an abundance of coal supplies allows smelters to access to lower-cost power,” Barclays added. Analyst with Barclays added that, “Some of the cuts in higher-cost production have been offset by the ramp-up of this lower-cost capacity further inland, though we understand that the pace of ramp-up has been constrained by power availability (lots of coal but not enough power-generating...

A 2.5 percent increase made Indian aluminum cash price the week’s biggest mover on the Aluminum MMI®. Following a 0.4 percent increase in the week prior, the primary aluminum cash price fell one percent on the LME last week to $1,974 per metric ton. The aluminum 3-month price fell 0.9 percent on the LME to $2,015 per metric ton after rising 0.4 percent the week before. Chinese aluminum prices were mixed for the week. The cash price of Chinese aluminum dropped 0.1 percent this week, closing out the third consecutive week of falling prices. Following a steady week, prices for Chinese aluminum bar closed flat above $2,200 per metric ton. Chinese aluminum billet traded sideways last week, hovering above $2,500 per metric ton. The price of Korean 3003 coil premium over 1050 sheet did not...

India's state-run National Aluminium Co Ltd (NALCO) on Friday said it has raised aluminium prices by Rs 4,000 per tonne across all products in the domestic market. The basic price of standard aluminium ingots after the latest revision increased to Rs 142,700 per tonne, Ansuman Das, commercial director of NALCO told Reuters. NALCO, which is India's third-largest producer of aluminium, revises prices of its products from time to time to mirror LME prices.

Insolvent German aluminium plant Voerde Aluminium has agreed a deal to maintain power supplies and is continuing production as the search goes on for a buyer, its provisional administrator said on Friday. The Voerde smelter, which produces 115,000 tonnes of aluminium annually, declared insolvency on May 4. Germany's metals industry association said the Voerde case illustrates the danger to German metal output from the country's high electricity prices. Agreement has been reached with power utilities about continued electricity supplies to Voerde without the financial guarantees previously requested, provisional administrator Frank Kebekus said in a statement. Continued power supplies were a "fundamental requirement" for continued operations, he said. The plant's main aluminium production...

Reportlinker.com announces that a new market research report is available in its catalogue: GBI Research’s new report, ‘Bauxite Mining Market in Asia-Pacific to 2020 - Increased Regional Demand for Aluminum to Boost Bauxite Production’ provides key information and analysis for the Asia-Pacific bauxite mining industry, which consists of the national markets of Australia, China, India and Kazakhstan. The report covers the industry’s drivers and restraints, production, reserves and consumption, and provides details of the country’s trade statistics (imports and exports). This report is based on data and information sourced from proprietary databases, primary and secondary research and in-house analysis by GBI Research’s team of industry experts.

Australian Bauxite Limited (ASX:ABZ.AX - News) are pleased to provide the Chairman's Address to Shareholders at the 2012 Annual General Meeting held today. Good morning, ladies and gentlemen and welcome to the Australian Bauxite Limited's 2012 Annual General Meeting. This is my first year as Chairman, and I would like to take this opportunity to thank and acknowledge Deputy Chairman Peter Meer's prior work as Chairman since the Company's successful IPO in December 2009. On behalf of the Shareholders, Board and staff, I would also thank Vincent Tan, who is stepping down from the Board today, for his important role in the creation of the Company. Last year Australian Bauxite achieved several significant and ambitious objectives, and I am pleased to report on the Company's positive progress...

The rich bauxite resources of Odisha and Andhra Pradesh might not see the light of the day if Union tribal minister V Kishore Deo has his way. Bauxite mining in Odisha and Andhra Pradesh faces an uncertain future with Union tribal minister V Kishore Deo shooting off a letter recently to ESL Narsimhan, the Andhra Pradesh governor, seeking a total ban on bauxite mining in these two states. The ban, if it comes into effect, could have huge ramifications as these states boast of almost two thirds of the country's bauxite deposits. The minister has cited increased Maoist attacks in Andhra Pradesh and Odisha as a cause for concern in his letter to the governor. "It is necessary to note that most of the killings by the extremists are in connection with those who have had close links with bauxite...

The Ma'aden Alcoa aluminium joint venture announced today that it has signed a contract worth SR5.6bn with Hyundai Engineering & Construction Co Ltd to construct its alumina refinery at Ras Al Khair in Saudi Arabia's Eastern Province. The contract includes: • completing detailed engineering, • procurement, • construction, • pre-commissioning, • commissioning assistance, • start-up assistance and • training services. The alumina refinery forms part of the fully integrated aluminium project under construction by project partners Ma'aden and Alcoa. The project also includes a bauxite mine at Al Ba'itha and an aluminium smelter and rolling mill, both at Ras Al Khair. The refinery will have an annual production capacity of 1.8 million metric tonnes of smelter-grade alumina and is scheduled for...

FSI Home Products, Inc., ( www.fsihp.com ) a leading manufacturer of aluminum outdoor living products, has increased its aluminum decking color offerings, giving homeowners even more options for maintenance-free, beautiful outdoor living spaces. Available with both the LockDry(R) and NextDeck(R) decking systems, the two new SuperDurable(TM) powder coat colors include Saddle Brown and Granite Grey. Both systems are also available in White, Light Grey, Buckskin, Golden Clay and Dakota Oak Wood Grain. "The new LockDry and NextDeck color options make it easier for our customers to install a maintenance-free aluminum deck that complements any home's exterior," said James Conn, president of FSI Home Products. "An added benefit of our SuperDurable powder coat finish is its UV stability, meaning...

By exhibiting jointly at the 10th International Aluminium Extrusion Technology Seminar and Exposition ET ’12, held in Miami, Florida mid-May 2012, the UAE’s two primary aluminium producers Dubai Aluminium DUBAL and Emirates Aluminium EMAL have once again successfully promoted their combined portfolio of world-class premium purity, high quality products to key decision-makers in the industry. Strong interest was shown through high visitor numbers to the stand, and a significant number of key meetings with existing and prospective customers together promising growth in market share. The combined exhibition stand focused on billets, being the feedstock for extruded aluminium products. Ranked among the world’s leaders in the production of primary aluminium billet, DUBAL and EMAL produced and...

Chinalco Northeast Light Alloy Co., Ltd. (NELA) held a launch ceremony for the installation of 2100mm cold-rolling mill of its oversized special aluminum alloy plate/strip project, `this marked the installation of 2100mm cold-rolling mill has officially started. It is learned that the installation of 2100mm cold-rolling mill is a landmark project for NELA also is the last host device for NELA’s renovation project. This kind of cold-rolling mill will boost company’s market competitiveness and was able to produce high-quality cold rolling products, improve company’s product mix, the planned annual capacity was 120 thousand tons.

According to the data from China Customs that China aluminum stranded cable exported volume was 12,722 totally in April increased 57.87% yoy. This year from January to April totally exported 41,306 tons also grew 62.45% yoy. According to the survey that the operating rate for domestic main aluminum cable enterprises was about 70% in April kept stable, while manufacturers expected that export and the continuous construction and investment of inland power grid will be the new growth points in later period. The rebound of aluminum cable export boost the business in domestic large scale cable enterprises, such as Henan Tong-Da and ZTT.