
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

Lower prices for aluminum have pushed a number of aluminum plants “under water,” unable to make a profit. That’s why modernizing Rio Tinto Alcan’s smelter in Kitimat is crucial. When upgrades costing $3.3 billion US are finished on the almost 60-year-old Kitimat facility it will be one of the lowest-cost smelters around, The Vancouver Sun editorial board was told Monday. The problem hurting smelters, including the one at Kitimat, is not a lack of demand, which keeps growing, but a spurt in supply, said Tom Albanese, the chief executive with Rio Tinto, Rio Tinto Alcan’s parent company. Right now demand for aluminum is strong, Albanese said. High copper prices have led to substitution from copper into aluminum. And some automobile parts are now shifting from steel to aluminum, he said. But...

Markets were closed overnight in countries including the US, Germany and France due to holidays, leading to light trading. The US dollar index was pressured during early European trading, helping LME aluminum test pressure at the 10-day moving average. The light metal failed to present any effective breakthrough, only hitting USD 2,028/mt, before closing up USD 13/mt or 0.65% at USD 2,027/mt. Transacted contract plunged 5,540 lots to 3,361 lots while LME aluminum stocks added 1,425 mt to 4,945,325 mt. Though more investors now expect Greece to stay in the euro zone, risk aversion will stay due to surging debt yields and bank downgrades in Spain. Aluminum is expected stay within narrow bands today, though being weak. LME aluminum should move between USD 2,010-2,030/mt and the most active...

MarketAark : announces report of 2012 Deep Research Report on China Alumina Industry Summary 2012 Deep Research Report on China Alumina Industry was professional and depth research report on China Alumina industry. The report firstly introduced Alumina (AL2O3) industry development history definition classification and allpications etc industry overview. Then introduced Alumina manufacturing technology and process, stastics China Alumina 2009-2016 capacity production supply demand shortage price cost production value and gross margin etc details data and information. And then introduce Alumina raw materials; Alumina market analysis; China Alumina key manufacturers; Alumina industry development trend; Alumina manufacturing cost structure; Alumina industry development problems and Alumina...

The former director of Aluminex Resources Limited has been charged with providing false information to the Australian Securities Exchange. David Alan Zohar, of Inglewood, appeared in the Perth Magistrate’s Court last week accused of misleading the ASX in relation to his company’s ability to meet the minimum requirements for listing. If found guilty, Mr Zohar, who has been charged with three counts of providing false information, faces up to six years in jail. Aluminex Resources Limited is a mining exploration company which held licenses to explore for bauxite and other base metals at tenements at Wandoo in the Chittering Valley, east of Perth. When Aluminex was first admitted to the official list of the Australian Securities Exchange (ASX) in September 2008, it had sought to raise up to...

LOADING of the 60,000 tonnes of bauxite in the province of Bua in Fiji is expected to be completed next week. Bauxite mine manager Basilio Vanuaca said the MV Yon Shun would load 60,000 tonnes of bauxite valued at $2.1 million a month. However, he said it was not clear when the ship would leave for China. "The ship is still being loaded and will complete loading by next week," Mr Vanuaca said. "Actual dates are not clear as it involves Customs, Immigration and Quarantine to release the ship," he said. The ship, which sailed straight from China for the first shipment, has a capacity of 60,000 tonnes. It arrived last week and was cleared in Lautoka before sailing to Galoa Bay with the help of local pilot Captain Freddy Vollmer. Mr Vanuaca said the Bua bauxite mine was expected to rake in...

Supported by slight gains in LME aluminum prices overnight, the most active SHFE aluminum contract for September delivery opened higher at RMB 16,030/mt, and settled up RMB 50/mt or 0.31% at RMB 16,045/mt on Monday, after a narrow struggle in RMB 16,020-16,040/mt. Positions added 4,158 lots to 91,720 lots. The bearish market sentiment eased, helping SHFE aluminum prices rise steadily and the most active SHFE aluminum contract consolidate at RMB 16,000/mt. The contract broke resistance at the 10-day moving average, but is expected to continue struggling near RMB 16,000/mt in the near term as longs lack confidence. Spot aluminum traded at RMB 15,970-16,010/mt in Shanghai, at discounts of RMB 0-40/mt over the current-month SHFE aluminum contract. The light metal was sold at RMB...

Fitch Ratings has affirmed Aluminum Corporation of China Limited's (Chalco) Long-Term Foreign Currency (FC) Issuer Default Rating (IDR) at 'BBB+' with Stable Outlook and Long-Term Local Currency (LC) IDR at 'A-' with Negative Outlook. The Short-Term FC and LC IDRs have been affirmed at 'F2'. Chalco is rated at three notches below China's ratings (FC IDR 'A+'/Stable; LC IDR 'AA-'/Negative) based on Fitch's application of the top-down approach in its Parent and Subsidiary Rating Linkage criteria. This reflects Chalco's and its parent Aluminium Corporation of China's (Chinalco) strategic importance to the government in developing the Chinese base metal industry and overseas resources. Base metals like aluminium are important to China's development of its aerospace and defence industries....

A high dollar, low prices and Asian competition are threatening the industry with older plants in New South Wales and Victoria under threat of closure. The debate about the future of the industry often concentrates on the high energy usage associated with aluminium production. The joke description of aluminium as congealed electricity is never far away. It is true that a lot of energy is required to make Aluminium. CSIRO calculate that the embodied energy for aluminium is 211 GJ per ton compared to 22.7 GJ per ton for steel. This huge difference in overall energy required to produce the metal helps explain the enormous difference in the scales of the two industries last year, nearly 1500 million tons of steel was made in the world compared to 40 million tons of aluminium. Of course,...

Premiums for imported primary aluminum products in the third quarter have settled at $200-210/mt plus LME cash CIF Japan last week, four Japanese market participants involved in the negotiations said Monday. One deal for over 500 mt/month of minimum 99.7%-grade primary aluminum ingot was confirmed at $200/mt plus LME cash CIF main Japanese ports for July-September, and another in the range of $201-210/mt, also for over 500 mt/month of ingot over July-September. The four market participants included two buyers and two sellers. Meanwhile, one Japanese buyer of billet/slab/alloy products is said to have agreed on a premium of $200/mt plus LME cash CIF, also for July-September, but other details of the deal could not be confirmed. Billet/slab/alloy product prices are typically based on a...

Global unwrought aluminum inventories at the end of April increased 63,000 mt from March but fell 80,000 mt from April 2011, according to figures released Monday by the International Aluminium Institute. Unwrought inventories totaled 1.454 million mt at the end of April, up from a revised 1.391 million mt a month earlier but down from 1.534 million mt at the end of April 2011. Total aluminum inventories at the end of April were up 77,000 mt at 2.406 million mt from a revised 2.329 million mt in March, but down 181,000 mt from 2.587 million mt a year earlier, the IAI said.

China's secondary aluminium output could fall this year because of a slowdown in the global economy and "lack of confidence" among buyers, a senior executive from one of the country's biggest producers told Metal Bulletin. "This year is a bit special, and will probably end up with a year-on-year decline after year-on-year growth [in output] of more than 10% in the last few years,’’ Chen Ching Chih, general manager of Ye Chiu Metal Recycling, said. Figures for China's secondary aluminium production vary widely from source to source, but Ye Chiu puts the volume at 4.68 million tonnes in 2011. Ye Chui produced 270,000 tonnes last year. The company, a unit of the Ye Chui Group, listed on the Shanghai Stock Exchange in April this year to raise funds for a 666 million yuan ($105 million)...

LFoundry, a semiconductor specialist based in France, just released its PDK 110 (Process Design Kit) paving the way to the production of semiconductors in 110nm Aluminum process, and integrating the state of the art embedded Flash technology. Rousset, France (PRWEB) May 29, 2012 LFoundry is proud to announce the availability of its PDK 110 (Process Design Kit), a key milestone for the production of semiconductors in its 110nm Aluminum process. The PDK includes several advanced technology options, especially an embedded Flash which is proposed in 90nm resolution. After two years of development and over EUR 5 million of R&D investments, LFoundry has released a design library including the appropriate set of tools for semiconductor design in 110nm node. This way, customer designs using...

Nalco has invited entrepreneurs and manufacturers to set up downstream and upstream units at its proposed aluminium park. The park will come up adjacent to its Nalco Smelter Plant at Angul with an aim to increase metal consumption within the state and get benefits for all micro, small and medium entrepreneurs (MSMEs) and people. At a plant-level advisory sub-committee meeting held at Nalco Training Centre on Wednesday, the executive director of Nalco (S&P Complex) Pradeep Ranjan Choudhury said the park will be a joint venture with Industrial Development Corporation of Odisha (IDCO). The project will be the first of its kind with necessary infrastructure support and facility to directly receive molten and solid aluminium. He said the downstream and upstream industries will produce...

The expansive product range of home improvement company Conservatory Outlet is set to grow further as the firm has announced its intention to start manufacturing, supplying and installing aluminium double glazing and triple glazing windows, doors and conservatories, in a joint venture with an established and experienced aluminium extruder and manufacturer. UPVC currently dominates Conservatory Outlet’s increasingly busy production line and will remain the core of the business in the coming years. However, the addition of aluminium will allow Conservatory Outlet dealers to venture into this highly lucrative and increasingly popular market, should they wish to expand their offering. Those Conservatory Outlet dealers already retailing aluminium products will be offered the opportunity to use...

The UAE aluminum extrusion market is estimated to be in excess of 175,000 metric tonnes (MT), about 35 per cent of the total GCC demand, growing at a CAGR of 8 to 9 per cent for the time period from 2011-17, said a report. With the strategic acquisition of AKFA Aluminium and Plastic, the UAE-based Emirates Extrusion Factory is poised to become one of the top players in the GCC, according to Frost & Sullivan, a leading business research & consulting firm. A subsidiary of Masharie, the private equity arm of Dubai Investments, the Emirates Extrusion Factory had last week announced the acquisition of a hitech production facility for aluminium extruded profiles from AKFA Aluminium and Plastic FZE, to increase its operational efficiency and meet rising demand. "When other regional players are...

Japan’s shipments of rolled-aluminum products expanded 1.4 percent in April, the third straight month of increase, as demand from automakers surged. Supplies to domestic and export markets increased to 166,048 metric tons last month from 163,805 tons a year earlier, the Japan Aluminium Association said today. The pace of increase slowed from 1.7 percent in March. “Shipments to the auto industry jumped as the government revived subsidy payments to buyers of fuel-efficient models, boosting car sales,” Takeki Murayama, secretary general of the association, said today in Tokyo. Sales to carmakers soared 48 percent to 23,519 tons, offsetting declines in shipments to makers of cans and electronics devices, according to the association.

Aditya Birla group’s Hindalco Industries, which posted lacklustre March quarter results, may find a saviour in Novelis – the US firm it bought in 2007 for $6billion. Novelis, now its US subsidiary, is expected to report stable or even better-than-expected results on Thursday as it is largely independent of volatility in aluminium prices due to its focus on value-added products, analysts said. “Novelis is focusing on a custom-smelting business, which is relatively stable and is largely independent of volatility in aluminium prices because of which the company is expected to report stable performance,” said Deepak Poddar, an analyst at Daiwa Capital Markets, in a May 4 report on Hindalco titled `Novelis exposure moderates volatility risk’. Further the expansion plan of the company is also...

A blaze in the crusher plant at Tennessee Aluminum Processors took firefighters about an hour to extinguish, officials said. There were no injuries. The fire started about 9:40 a.m., Mt .Pleasant Fire Chief Tim Smith said. As firefighters arrived at the scene, a thick plume of black smoke could be seen from several miles away. “Apparently people could see it (smoke) all the way from the 43 bypass, so we were getting calls from spectators and the company at the same time,” E911 Director Freddie Rich said. Mt. Pleasant Fire Department responded and called for mutual aid from the Maury County Fire Department, he said. The Maury County Office of Emergency Management also responded. Smith said the crusher plant building is about 100 feet by 200 feet in size and is about 75 yards from the...