
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

Amid early strong interest rate cut expectations, the PBOC announced Thursday evening to cut one-year deposit and loan benchmark rates by 0.25 percentage point, boosting market confidence. During European trading, LME aluminum got over early weakness and climbed with other metals, breaking through the 5-day moving average and touching a high of USD 2001/mt. However, Fed President did not imply easing monetary policy as market expected, that, coupled with Fitch Ratings’ three-level cut on Spain’s credit ratings, rekindled worries towards the global economy, eroding most of LME aluminum’s early gains. The light metal eventually closed at USD 1,988/mt, up USD 7/mt or 0.35%, Total positions surged 13,917 lots to 739,794 lots. Latest LME aluminum stocks plunged 28,750 mt to 4,875,375 mt....

The cash price of primary Chinese aluminum saw a 0.4 percent drop on June 6, 2012, making it the biggest mover of the day on global aluminum markets. Chinese aluminum billet ended the day after a 0.2 percent drop yesterday. The price of Chinese aluminum bar held steady at above $2,200 per metric ton. Chinese aluminum scrap stayed flat at below $2,600 per metric ton. Wednesday saw Indian aluminum cash price drift down 0.3 percent after a couple of stagnant days. On the LME, the 3-month price of aluminum showed little movement yesterday, hovering around $1,979 per metric ton. The cash price of primary aluminum remained essentially flat on the LME at $1,936 per metric ton.

Ormet Corp. posted a $1.1 million net loss for the first three months of 2012, but company officials spent $1.9 million during this time to reline 22 pots at the Primary Aluminum Reduction Plant. As Ormet gears up for the future, the company continues dealing with costs related to the restart of Ormet's Burnside, La., alumina facility, though President and Chief Executive Officer Mike Tanchuk said operations there are coming into place. With eyes focused on the future, Tanchuk and other Ormet leaders are now looking at the possibility of making joint investments with Trafigura, one of the world's leading commodity traders, specializing in the oil, minerals and metals markets, with 81 offices in 54 countries. "To be successful, Ormet must grow smartly while we continue to focus on our...

Rio Tinto Alcan has awarded two contracts to Fives Solios for its Kitimat brownfield smelter, in British Columbia, Canada. The first contract for the Green Anode Plant consists of the supply of a complete mixing line including the preheating screw, the IMC (Intensive Mixing Cascade), two Xelios, the anodes cooling tunnel as well as the integration of a pitch fume treatment system. A new plant will be built adjacent to the existing one and connected by an air conveyor to convey dry materials to the new mixing line. The Green Anode Plant will have a production capacity of 42t/h. The second contract includes the design and supply of three 100t capacity tilting Melting and Holding furnaces with the associated launder systems. The furnaces will be equipped with siphon metal transfer systems,...

Aluminium Bahrain BSC (ALBH) will spend $2.5 billion by 2015 to increase output, betting prices of the metal will rebound from a 30 percent slump in the past year that’s forcing U.S. and European rivals to shutter plants. Alba, as the company is known, plans to invest the money on adding a potline to produce 400,000 metric tons a year, boosting total capacity by about 30 percent to 1.3 million tons, Schmitt said. It will also include power generation for the development. The producer is seeking to begin a feasibility study before the end of the year and is in discussions with the Bahraini government over allocating energy to the development, he said. Alba is among Middle East producers able to rely on cheap energy to buck a global trend of shrinking output of the metal. Emirates Aluminium...

Alecto Minerals plc, the AIM listed multi-commodity exploration and development company with projects in Ethiopia, Mauritania, and an option over a highly prospective bauxite asset in Guinea, announces its audited results for the year ended 31 December 2011 and gives notice of its AGM to be held at the Washington Mayfair Hotel, 5 Curzon Street, London W1J 5HE on 29 June 2012 at 11.00am. The report and accounts have today been sent to shareholders and will be available on the Company's website at www.alectominerals.com. Highlights • Strengthened portfolio through two gold acquisitions offering exposure to prime mineralised regions in Ethiopia. • Planned drilling at Wayu Boda gold licence in Ethiopia for Q3 2012 to advance targets highlighted through artisanal and historical work. •...

Australian Bauxite Limited advises that is has completed a placement of 4.3 million fully paid ordinary shares at $0.39 cents per share to sophisticated, eligible and/or professional investors, as defined under Section 708 of the Corporations Act (Placement). $1.67 million of additional capital was raised to progress the company's drilling and development programs and to provide working capital. State One Stockbroking Ltd facilitated the placement, which was well supported by existing shareholders. ABx will release an updated list of top twenty shareholders as soon as practicable. Settlement of the placement is scheduled to occur on 12 June 2012 and quotation of the new shares is expected to commence on that date. The shares are to be issued in accordance with a resolution passed by...

The near-term operating environment for Alumina is difficult, as overcapacity is driving down prices, aluminium inventories are at near record levels and capacity closures haven't yet been enough to tighten up the market. In JP Morgan's view this tough near-term outlook for Alumina Ltd should not necessitate an equity rising, as undrawn debt facilities are likely to be enough to ride things out in coming months even if market conditions worsen further before improving. While this is a positive, the issue in JP Morgan's view is weak near-term cash flows that are likely to mean an increase in group debt levels. The broker's estimates suggest dividends received from AWAC won't be enough to cover interest, corporate costs, capital calls and remaining dividend payments. This leads JP Morgan to...

Targray Technology has chosen Intersolar Europe as the platform upon which to launch its new aluminium pastes, the M7 range, which is designed for rear-side passivated and locally contacted solar cells. The paste, suited to PERC- and PERL-based manufacturing technologies, is designed for use on passivated surfaces in mono- and multicrystalline silicon solar cells. The paste was developed by Giga Solar Materials Corporation with the aim of increasing adhesive properties and maximizing cell efficiency. Targray will be exhibiting its new paste in Hall A5, booth 288.

Quanex Building Products Corporation today announced that Thomas A. Brackmann, President of Nichols Aluminum, is no longer with the company. Quanex is a leading manufacturer of engineered materials, components and systems serving domestic and international window and door OEMs through its Engineered Products and Aluminum Sheet Products groups. Mr. David D. Petratis, Chairman, Chief Executive Officer and President, will serve as Nichols' Interim President until a successor is announced.

Ningxia Energy Aluminium Co.,Ltd and Ningxia Jinning Aluminium Co.,Ltd realized full production from January to April and drove substantial growth of the non-ferrous metals industry. From January to April, Ningxia’s non-ferrous metals industry realized industrial added value 1.96 billion RMB, up by 24.5% compared with last year. Electrolytic aluminium output reached 502,000 tons from January to April, up by 61.2% on YoY basis.

Authorities have now confirmed that the Rain CII plant was caught on fire, which is near the Noranda Aluminum Plant in St. James Parish. The Rain CII Plant caught on fire around 7:30 PM Wednesday. The plant is a part of the old Kaiser Aluminum plant in St. James Parish in Gramercy. St. James Parish Sheriff Willy Martin says the lightning from Wednesday's storms may have ignited the fire. The roof, of wood construction, caught on fire, and then collapsed on top of a product stored in the facility known as calcined coke. There are no reported injuries. The fire has been controlled to the confines of the Rain CII plant, and there is no off-site impact. The St. James parish president, Timmy Roussel, said there have been no evacuations and there will be no need for any. The state police hazmat...

Aluminium ended flat at 1986 per tonne Thursday. Investors got cheered by the successful bond auction and fall in US jobless claims on one side and China's reserve rewuiement which raised the concerns on its sluggish growth economic scenario coupled with Fed signaling no further stimulus on other side pressurized the metal. The sequrntial decline in LME aluminium inventories that fell by 28750 tonnes to 4875375 tonnes curbed huge losses in the metal. Aluminium remained unchanged at Rs 108.4 per on Thursday, 7th June at MCX and tested an intraday high of Rs 108.75 per kg and low of Rs 107.6 per kg. The rise in its open interest to 2103 lots restricted the metal from its fall. The contract traded below 9-day EMA and was still found to be on oversold region with its RSI at 29.7. Aluminium...

According to the news on 5th, June, China aluminum capacity will be more than 50 million tons in 2015 said by Ren Xiaoling, senior management from Chinese aluminum processing department. From 2011 to 2015, there will be an increasing of 20 million tons in aluminum processing industry.

The first businesses to benefit from the federal government's $1 billion grants program to help manufacturers cope with the carbon pricing include an insulation maker, an aluminium can plant and a number of wineries. Manufacturers awarded grants of up to $500,000 under the clean technology investment program have to match the government on a dollar-for-dollar basis. Businesses applying for all other grants under $10 million are required to contribute $2 for every $1 from the government. For grants of $10 million or more at least $3 must be contributed for each $1 received. The money must be invested in new equipment and processes that cut carbon emissions. Thirteen grants worth a total $8.1 million were announced on Thursday. They attracted co-investments of $23 million. The grants were a...

An expansion of Aluminum Castings Corporation’s manufacturing operation at its current location at 340 S. Kellogg St. has raised concerns from a city official and residents. As part of a $2 million expansion that will double the amount of workers the manufacturer employs, the company has told city officials of its plan to expand production to its warehouse. Doing so would require the property to be rezoned from light industry, or M-1, site to heavy industry. Aluminum Castings Corporation produces sand mold aluminum castings, which require aluminum to be melted in the plant. Markum said the business has been in the same location since 1964. The city is working with the company to allow such manufacturing in an M-1 zoning site. The city’s planning and zoning commission on May 22 recommended...

John Weritz has been named Vice President of Standards and Technology at the Aluminum Association, effective July 9. In this role Weritz will be responsible for the development and maintenance of industry standards for alloys, aluminum alloy/temper products, and structural applications. He will also serve as chief industry resource responding to technical and general queries from customers, government agencies, the media, and the public concerning aluminum products, processes, and standards. Weritz comes to the Aluminum Association from Wise Alloys, where he has served as Metallurgy Manager since 2007. In that role, he was responsible for developing and improving manufacturing methods for Wise's commercial aluminum products. Weritz brings over 30 years of experience in the production of...

General Cable Corp. says it will acquire Alcan Cable, the wire and cable division of Rio Tinto PLC. The purchase price is $185 million in cash, subject to customary adjustments primarily related to working-capital levels at closing as provided in the definitive purchase agreement. General Cable expects to use its asset-based revolving credit facility to principally fund the transaction, which is expected to close later this year. Alcan Cable employs approximately 1,050 associates in its aluminum cable manufacturing and distribution facilities serving the energy and construction markets in the U.S., Canada, Mexico and China. The company estimates that the acquisition will contribute approximately $650 million to $700 million in revenues at current metal prices. "The addition of aluminum...