
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

Hindalco has issued 10-year R1500Cr 9.55% secured redeemable NCDs having face value of R10 lakh each through private placement. These funds will be used for capital expenditure, working capital and debt refinancing. In April, it raised around R3000Cr through NCDs. Hindalco is currently implementing large-scale integrated projects for its aluminium business; the total project cost is estimated to be over R300 billion for the medium term. The ongoing capex will increase the company’s aluminium smelting capacity to around 1700 ktpa by 2014-15 from the current capacity of 590 ktpa. Hindalco is the flagship company of the Aditya Birla group. The company commenced operations in 1962 with an aluminium unit at Renukoot, U.P. It has installed capacity to produce 590 ktpa of aluminium and 1700 ktpa...

The London Metal Exchange is considering launching a North American aluminum contract, sources say, a measure that could expand the footprint of its most-active futures market. Discussions are still at an early stage, but the LME has begun to canvas physical traders and consumers about the viability of a U.S. contract that would include the Midwest physical premium, which represents the additional cost of delivering the metal from an LME warehouse in Detroit or New Orleans or a producer plant to the Midwest, market participants have told Reuters. At least one ring dealing member had asked the 135-year old exchange to look into a new contract based on feedback from its own customers, according to a senior executive at the firm. If the LME follows through, it would be biggest expansion of...

Global miner Rio Tinto said it expected economic growth in China, the world's top consumer of raw materials, to rise above 8 percent this year. A slowdown in Chinese growth this year has translated into weaker consumption of raw materials such as copper and oil, contributing to a slide in commodities prices. "We expect Chinese growth to be above 8 percent this year despite lower export demand and monetary tightening," Rio said in a presentation on its website. "Recent fiscal and monetary loosening should lead to a pick-up in growth in H2 2012," Vivek Tulpulé, Rio's chief economist, said in a presentation. A Chinese finance ministry official said on June 28 the country was confident it could meet its 2012 economic growth target of 7.5 percent. Rio also was optimistic about the outlook for...

RIO Tinto has completed construction on the $2.4 billion expansion of its Yarwun alumina refinery and has begun the process of ramping up to full production next year. "The Yarwun expansion project will more than double production at the refinery to 3.4 million tonnes of alumina per year, making Rio Tinto Alcan the world's leading bauxite and alumina producer," Armando Torres, chief operating officer for bauxite and alumina at Rio's Alcan aluminum division, said. Mr Torres said the focus for the remainder of the year would be to bring the expanded plant safely into stable operation and gradually increase its production capacity. The Yarwun plant, located 10 kilometers northwest of Gladstone in central Queensland, began refining bauxite into alumina in 2004.

Orbite Aluminae Inc. is proud to announce it produced its first commercial samples of high-purity alumina (HPA) at purity levels of 99.999% (5N). This achievement follows the production of 99.99% (4N) purity HPA that that the Company previously achieved in 2011 while the market is transitioning to higher purity levels. Consequently, Orbite continues to upgrade its technical capabilities to produce not only 4N and 5N HPA but also to achieve 99.9999% (6N) purity level. The 5N samples were pre-tested by independent laboratory Evans Analytical Group (EAG), which confirmed their compliance with the Company's and market purity specifications. These samples will shortly be sent to selected collaborators, designated based on their HPA needs, their intent to increase consumption of this type of...

COBA Europe has introduced an impressive selection of competitively priced Aluminium systems to its specialist entrance matting range aimed at flooring contractors and specifiers. Known as the ‘plan range’, the very stylish, high quality entrance systems provide an extensive choice of primary and secondary matting designs that are custom-made to order. They are ideal for fitting in ‘zoned’ entrance areas with options for indoor and outdoor environments. The manufacturing technique allows for matting to be produced with an extensive choice of surface finishes and styles to suit each specific location for optimum dirt-barrier performance. There are four main product categories in the versatile ‘plan range’, each with their own unique features and benefits, but all are suitable for heavy...

The European Trade Fair for Composites - COMPOSITES EUROPE, which is a lightweight construction summit, will be conducted at the Düsseldorf Exhibition Centre, from October 9 to 11, 2012. ALUMINIUM World Fair will also be organized in parallel with the former trade fair. More than 1,300 companies from over 50 countries are likely to present their products at this 2012 twin fair. The COMPOSITES EUROPE summit will host 400 companies out of 1,300, during its seventh edition. The entire composites process chain ranging from raw materials to partially finished products and processing through to the newest technologies, services and machinery will be showcased at the COMPOSITES EUROPE. Automation and composite production will be the main topic of this year’s trade fair. COMPOSITES EUROPE will...

DuraClass Aluminum HPT dump bodies provide contractors a hard working, versatile dump body with a lightweight, durable, corrosion resistant aluminum construction. Full aluminum design offers corrosion resistance, eliminating paint expense and increasing body value at trade-in. Typically up to 50 percent lighter than traditional steel, the decreased body weight of aluminum bodies increases payload capacity, minimizes fuel consumption and improves truck life, according to the manufacturer. DuraClass Aluminum HPT bodies feature fully enclosed front posts and slanted vertical side braces and are available in sizes ranging from 10 to 18 ft. (3 to 5.5 m) with 5 to 20-cu. yd. (3.8 to 15 cu m) capacities. Contractors can get the DuraClass’ aluminum body equipped with additional features including...

On June 27, 2012, the Chinese aluminum cash price fell by 1.9 percent, making it the day’s biggest mover. Chinese aluminum billet prices saw a 1.9 percent decline. The price of Chinese aluminum bar held steady. The price of Chinese aluminum scrap continues hovering just under $2,600 per metric ton for the fifth day in a row. The 3-month price of aluminum saw a 0.4 percent decline on the LME to $1,851 per metric ton. On the LME, the primary aluminum cash price fell 0.4 percent to $1,810 per metric ton. Indian aluminum cash price gained 0.3 percent.

United Co. Rusal (486), the world’s biggest aluminum producer, said it will hold an extraordinary shareholder meeting after a request by Sual Partners Ltd., it’s third-biggest holder, with which it’s in a legal dispute. Rusal, facing an escalating shareholder conflict over Rusal management’s decision to hold on to 25 percent of OAO GMK Norilsk Nickel, said it will hold the meeting on Aug. 3, the Moscow-based company said in a statement. Sual, owner of a 15.8 percent stake in Rusal, wrote to the aluminum producer requesting the board meet to consider amending or introducing regulation to refer related party transactions to shareholders for approval. Rusal in April hired legal counsel to advise on arbitration brought by Sual to overturn trading contracts with Glencore International Plc....

South Korea purchased a total of 6,000 tonnes of aluminium for arrivals by Sept. 20 via tenders on June 28, the state-run Public Procurement Service said on its website (www.g2b.go.kr). Details of the purchases are as follows: TONNE SUPPLIER PREMIUM(CIF/T) ORIGIN 3,000 LG International Corp $235 Non-Western 2,000 LG International Corp $240 Western 1,000 Glencore International AG $245 Western *Note: The above premiums were made over London Metal Exchange (LME) prices.

Below are the three companies in the Aluminum industry with the highest betas. Higher-beta stocks mean greater volatility and are therefore generally considered to be riskier but also may provide the potential for higher returns.Century Aluminum ranks highest with a a beta of 2.1. Noranda Aluminum is next with a a beta of 1.9. Alumina ranks third highest with a a beta of 1.5. Alcoa follows with a a beta of 1.5, and Kaiser Aluminum rounds out the top five with a a beta of 1.2. SmarTrend recommended that its subscribers protect gains by selling shares of Alumina on February 14th, 2012 by issuing a Downtrend alert when the shares were trading at $5.01. Since that call, shares of Alumina have fallen 33.7%. We are now looking for when a new Uptrend will commence and will alert SmarTrend...

MCX Aluminium recovered earlier losses and surged by 1.1% or Rs 1.15 at Rs 104.6 per kg on Wednesday, 27th June and tested an intraday high at Rs 104.85 per kg and low at Rs 102.7 per kg. Bargain hunting with 35% rise to 6117 lots favored the metal to end with huge single day gains but found to be still below 9-day EMA with its RSI at 31.77. Aluminium is likely to find support at Rs 104 per kg and Rs 103.3 per kg and resistance at Rs 104.9 per kg and Rs 105.7 per kg. At LME, Aluminium edged down by 0.1% at $1849 per tonne on Wednesday. The looming EU summit hammered the metal but the tentative data from the US that showed rise in its housing data and durable goods orders curbed huge losses in the metal.

The most active SHFE aluminum contract for October delivery started higher at RMB 15,160/mt and settled up RMB 355/mt or 2.37% at RMB 15,360/mt, after finding its high at RMB 15,390/mt. Positions dropped 3,494 lots to 123,850 lots. SMM expects the contract to struggle at RMB 15,200/mt for the near term lacking real support. Spot aluminum was traded at RMB 15,400-15,430/mt in Shanghai, with low-iron aluminum trading at RMB 15,500-15,520/mt. The current-month contract surged some RMB 200/mt to above RMB 15,400/mt. Selling interest was strong but buying weak due to tight cash flows as well as poor demand, expanding spot discounts to RMB 30/mt and leaving trading light. The wait-and-see sentiment dominated the afternoon session as selling interest weakened amid rapidly climbing SHFE aluminum...

Pessimism in the EU Summit going on to solve the region’s debt crisis clouded overnight markets, dragging LME aluminum to a USD 33/mt or 1.76% loss when the light metal managed to recover slightly from a low of USD 1,837.3/mt to USD 1,843/mt. Aluminum was the worst performer among base metals on the London Metal Exchange. Its total positions were down 2,601 lots to 705,784 lots. Latest LME aluminum stocks added 5,575 mt to 4,844,725 mt. Metals trading should remain cautious today amid doubts on the EU stimulus package. LME aluminum is expected to be pressured at the 5-day moving average and move between USD 1,830-1,860/mt. The most active SHFE aluminum contract for October delivery should open lower near RMB 15,100/mt and may test support at RMB 15,000/mt if short selling strengthens. Its...

Aluminium futures prices rose 0.33 per cent to Rs 104.95 per kg today as speculators created fresh position in tandem with a firming global trend amid pick up in spot demand. At the Multi Commodity Exchange, aluminium for delivery in June gained 35 paise, or 0.33 per cent, to Rs 104.95 per kg, with a business volume of 298 lots. Similarly, aluminium for July contract traded higher by 20 paise, or 0.19 per cent, to Rs 106.75 per kg, with a trade volume of 138 lots. Analysts said firmness in the entire base metals pack at the London Metal Exchange (LME) and a pick-up in domestic demand, led to a rise in aluminium futures prices here. Meanwhile, at the LME aluminium rose 0.16 per cent to USD 1,875 a tonne.

Rusal’s Guyana operations could be affected as aluminum prices in Europe are tumbling. According to Rusal’s CEO Oleg Deripaska there is a small deficit since May as the market is now highly volatile. Price of aluminum globally is approximately US $ 24, 00 compared to 35 hundred before the economic crisis. Deripaska says the price has the right balance, because of supply and demand and transportation costs. Europe demonstrate stable consumption numbers however globally, last year consumption had eleven percent growth with a worldwide expectancy of about seven percent. As prices down he says there are signs that the stock is also going down. Deripaska explains that developing countries use other things such as steel but when countries are more developed they use aluminum in the different...

For aluminum market observers, 2012 has brought some interesting dynamics. Take for example prices – LME prices have hit a two-year low, while Midwest premiums have hit a high. Meanwhile China prices remain comparatively high. At the same time, lead times from LME warehouses continue to grow and have exceeded 12 months! At this year’s Harbor Aluminum conference, participants gained a much deeper understanding and appreciation for what drives aluminum markets. That has more to do with the careful skill and moderation of the program by a deep subject matter expert, Jorge Vazquez and his team of knowledgeable analysts. Participants at Harbor Aluminum conference answered a broad range of questions posed by Harbor and MetalMiner: On market speculation Do you think speculative flows play a role...