PV frame makers maintain stable operations; Aluminium prices to consolidate amid mixed macro signals
PV aluminium extrusion: According to an SMM survey, operating rates at sampled PV frame enterprises remained stable overall this week, with some large frame producers maintaining high operating loads. A large frame enterprise in Anhui reported that October production was basically flat M-o-M, while export orders increased, accounting for around 20 per cent of its total production. Regarding processing fees for PV aluminium frames, most long-term contract orders have seen processing fees fall below RMB 2,000 per tonne, operating essentially near the cash cost line. Downstream at the module end, October module production estimates were revised down by 500-700 MW from the beginning of the month. China's November production is expected to fall by another 1 GW, with the December decline...
China Sept bauxite imports climb 18.7% M-o-M; elevated freight costs hit non-mainstream imports
According to data released by the General Administration of Customs of the People's Republic of China (GACC), China's total bauxite imports reached 18.33 million tonnes in September 2026, up 18.7 per cent month-on-month and 15.4 per cent year-on-year. Over January-September, cumulative bauxite imports totalled 173.9 million tonnes, up 10.3 per cent year-on-year, with overall imported ore supply remaining at elevated levels. According to Mysteel's data, Chinese alumina producers consumed approximately 128.79 million tonnes of imported ore on a cumulative basis from January to September 2026. Actual imported ore consumption significantly lagged total imports over the same period, indicating that the imported bauxite market remains surplus for now. Among China's bauxite imports in September,...
Grow with
AL Circle
Rusal's Chairman Bernard Zonneveld delivers statement regarding the situation in Ukraine
The Chairman of the Board of Directors, United Company RUSAL, Bernard Zonneveld stated that, "Rusal is a multinational company, our employees work across 5 continents in 20 countries, including Ukraine." "Being interested in putting an end to the conflict in this European country as quickly as possible, we are closely watching the events there, in the hope that this horror and tragedy will finally stop." The Chairman communicated by saying, "Reports from the Ukrainian city of Bucha shocked us. We believe that this crime should be thoroughly investigated. We support an objective and impartial investigation of this crime and call for severe punishment for the perpetrators. No matter how hard it may seem in the context of ongoing information war." "Despite the brutality of the current events...
Granco Clark supplies APEL Extrusions, Inc. with a complete Heating, Handling, and UBE Press System
APEL Extrusions, Inc. is expanding its production capacity quickly in the new Phoenix, AZ facility. Apel has officially commissioned Granco Clark and UBE to provide equipment for a second press line in their new facility. This news comes while Apel awaits the installation and commissioning of their first press for this facility. Press #1 is expected to be online by mid-year 2022, followed quickly by press #2. Apel is taking full advantage of the latest technology that Granco Clark has to offer. Both systems feature the best High-Performance Spray Quench technology available, a Cut-On-The Fly Double Puller, High-Velocity Cooling Ducts, truly operator free Stretcher, an Automated Belt/Conveyor Handling System, High-Efficiency Log Furnace with Hot Billet Saw, FusionBond™, and Taper Quench...
METEF returns to BolognaFiere from 9 to 11 June, at the same time as MECSPE
From automotive to electronics, from transport to mechanical processing, up to the construction industry, over the last decades aluminium is more and more used in everyday life and in the industrial field. A sector with "infinite" end-use applications, which is 2021, just for the first productions and transformations in Italy is worth a turnover of 12 billion euros (+30% on 2020), employing more than 15 thousand people, and that for the whole chain, including final uses, counts a turnover of more than 40 billion euros. A sector that will play a strategic role in the pursuit of international industrial decarbonisation goals. Aluminium, in fact, besides being cheap, light and flexible, can be recycled and reused indefinitely in production processes, with extraordinary positive effects in...
MRAI deliver suggestions for Union Budget 2022-23 regarding changes in direct and indirect taxes
The apex body of India, the Material Recycling Association of India (MRAI), which represents the interest of the recycling industry with over 1200 members, comprising most of the Regional Trade/Product Associations with a collective strength of over 20,000 SMEs and large enterprises and directly and indirectly employing 2.5 million people, stretching across recycling and recyclable commodities including aluminium and other Non-Ferrous and Ferrous metals has drawn the attention that is advancing as major challenges to the sustainability of domestic companies, thus desired the urgent attention of the government. Free Trade Agreement: Issue: The Copper and Copper Alloy fabricating industry manufacturing Sheets/Strips/Rods/Foils/Tubes etc. covered under HSN Codes Chapter 7409/7410/7411, is...
MRAI quote suggestions and recommendations for the ‘Union Budget 2022-23’ in respect to direct and indirect taxes-reg.
The apex national body of India, Material Recycling Association of India (MRAI), representing the interest of the recycling industry with over 1200 members, includes most regional trade/ product associations. The collective strength comprises over 20,000 small, medium and large enterprises, directly and indirectly employing 2.5 million people, spanning over recycling and recyclable commodities including metals (both Ferrous & Non-ferrous), plastic, paper, E-waste, tyre & rubber, glass, automobile, textile, building & construction and water. The suggestions, recommendations and proposals for Indian Union Budget FY 2022-23 regarding direct taxes and indirect taxes-reg. are as follows: Removal of Custom Duty on import of Metal Scrap (HSN 7404, 7503, 7602, 8548, 7802, 7902, 8002 Review of...
Recycling facilities in parks and on beaches most in-demand: Every Can Counts
The British public think parks and beaches are the most in need of improved recycling facilities, according to new research by Every Can Counts. Nearly seven in ten 10 Brits (68%) think these public spaces lack sufficient recycling facilities, following their increased use over spring and summer due to Covid restrictions. This is up from 54% who felt more bins were needed in 2020. Six in 10 also feel that a greater number of on-street bins are required to make recycling easier on the go, and 55% are calling for more recycling points at music and sporting events. The not-for-profit drink can recycling organisation surveyed more than 6,000 people throughout the UK on their views about recycling and the environment. Of those polled, nearly three-quarters (73%) say they would recycle more...
Gillespie & Powers Inc. to build 4th homogenizing furnace for Ellwood Aluminum
Gillespie & Powers Inc. declare that it has entered into an agreement with Ellwood Aluminum for the additional supply of their second 200,000 Lb. Batch Homogenizing Furnace for their continued Phase 2 expansion in Hubbard OH. However, this equipment will be operational in July 2022. Gillespie & Powers Inc. is honoured to have been selected for this project. Earlier this year Ellwood selected Gillespie & Powers Inc. to build their third homogenizing oven. Gillespie & Powers Inc. previously supplied a Tilting Melter, Tilting Holder and SOW Drying Oven during their initial plant construction and is excited to be partnering with Ellwood Aluminum in the continued development of their business. Gillespie & Powers Inc. is a 5th Generation family-owned design, build, supplier of specialized...
BALCO dispatches its first fly-ash rake for ‘green’ cement manufacturing
India’s iconic aluminium producer, Bharat Aluminium Company (BALCO) has recently dispatched its first rake of fly-ash to a prominent cement manufacturer, to aid in the production of low-carbon cement. This is a significant stride in BALCO’s aim of ensuring 100% fly-ash utilization in a gainful manner through avenues that foster a circular economy. On this important achievement Mr Abhijit Pati, CEO and Director, BALCO, said, “We believe in leveraging next-generation technologies to minimize, recycle and reuse byproducts and industrial wastes from our manufacturing process in innovative ways that are beneficial for the people and environment. We have implemented novel solutions for environmental management and to reduce our carbon footprint. We look forward to the greater partnership...
AZ China consultancy joining both ends of the world in a unique virtual conference about the future of aluminium
AZ China is taking virtual conferences to new horizons, where delegates will have a near to real-life experience attending and smart networking opportunities to make participation rewarding, profitable and fun. We are on the cusp of an amazing new world and this conference will create a space to discuss the compelling future for our industry with admired and expert speakers and people from all over the world. When the world looks stretched apart and far apart, there has never been a time more important to stay connected. This conference brings it all to you, the excitement of networking, the interesting debates, the hot topics, the live forums and Q&As. It is all there with a touch of a button, all live, fresh in a fascinatingly close to reality platform from the ease of your office and...
Globitas acquires HEGO Stainless Steel & Aluminium
On 1st October 2021, the investment company Globitas successfully completed the acquisition of the company HEGO. HEGO has been active as an international wholesaler of stainless steel and aluminium for over forty years. The acquisition by Globitas gives a strong boost to HEGO's growth ambitions. With this new shareholder, the company is entering a new phase with a focus on innovation, digitization and new business models. Since 1977, HEGO has been active as an international wholesaler and service center in the trade and processing of stainless steel and aluminium. HEGO has a wide range of stainless steel and aluminium sheets and coils in various sizes and alloys, which are available directly from stock. However, with its own service center (cutting, laser cutting, polishing and decoiling)...
Italian-Russian Chamber of Commerce organizes “METALHUB RUSSIA ITALY: INDUSTRIAL INNOVATION AND METALLURGY”
The Italian--Russian Chamber of Commerce organizes a public conference dedicated to metallurgy “METALHUB RUSSIA ITALY: INDUSTRIAL INNOVATION AND METALLURGY”, promoted by Ccir with ArtValley. The conference will be streaming live on the Youtube channel of the Italian-Russian Chamber of Commerce on 21st September 21 at 14:15 – 16:30 hrs. in connection with Moscow and other capitals. The program will be moderated by Prof. Alberto Cavicchiolo and the details of the program are as follows: 2.15 pm Introduction by Eugenio Bodini - Confindustria Brescia 2.20 pm History of a successful cooperation Speaker: Antonello Colussi - President of Danieli Russia (in video link) Alexey Sentyurin - Executive Director of Russian Steel Аssociation (in video link) Artom Asatur - Chairman of Russian Aluminium...
Virtual ICSOBA 2021 event will take place on 22 -24 November 2021
ICSOBA Board’s constant attention is to take into consideration the ICSOBA community viewpoint, hence our recent survey on intention to travel. From the undisputable survey results, we decided to shift from the planned hybrid format of the conference to a full virtual ICSOBA 2021 event. The three-day conference will take place on 22, 23 and 24 November 2021. The conference will cover bauxite, alumina, bauxite residue, carbon for aluminium electrolysis, aluminium production, and aluminium recycling in a variety of technical sessions. There are 10 high-calibre keynote speakers and over 100 technical papers were submitted. All presentations will be pre-recorded and transmitted online. We are very thankful to Aluminium of Bahrain to support the conference as the host sponsor. All participants...
AMAG presents path to climate neutrality and sets into operation Austria's largest rooftop photovoltaic system
In the presence of owner representatives, the chairman of state government, Thomas Stelzer, and guests from the region, the AMAG board of directors presented the path to climate-neutral production by 2040 on September 15, 2021. As a major milestone on this path, the largest rooftop Photovoltaic system in Austria was set into operation at this event. AMAG strategy for climate neutrality For many years, AMAG’s strategy has relied on special products and sustainability based on innovation. On this basis, a plan of initiatives has now been drawn up for the next 20 years, which describes the path to climate-neutral production by 2040 based on extensive R&D activities and investments in plants and infrastructure. The core topics are circular economy and recycling, energy efficiency and the...
New life for recycled aluminium, credit to Centro Rottami, Indinvest and TOMRA’s sensor-based sorting machines
In the province of Latina, a scrap recycler supplies a nearby foundry with recycled aluminium that has been sorted by TOMRA’s machines to produce a green billet with 85% recycled content. This is an outstanding example of how to create a quality finished product with lower energy consumption and less pollution. Aluminium is a precious material, which when recycled maintains its surface characteristics. A 100% recyclable resource, recycled aluminium offers 95% energy savings and reduced CO2 emissions compared to the production of primary aluminium from bauxite - with consequent reduction of CO2 emissions. Italy ranks first in Europe in the production of recycled aluminium with a 70% recovery, far exceeding the objectives set by the European Union (50% by 2025). Centro Rottami and...
Gillespie & Powers Inc. purchases Thorpe Technologies
Gillespie & Powers Inc. is extremely excited to announce the purchase of Thorpe Holding Company, including Thorpe Technologies Inc. and JT Thorpe Inc. all located in San Dimas, California. Gillespie & Powers Inc. and Thorpe Technologies Inc. are two strong and successful companies, both with long-standing reputations of excellence with their customers domestically and internationally. By bringing these two entities resources together we hope to elevate the customer experience even further and deliver maximum value with the latest technological advancements. Mr Jack Gillespie will be assuming the role of President of Thorpe Technologies Inc., with Mr John Allen remaining with Thorpe Technologies Inc as Sr. Vice President. Mr John Peterman will remain as President of Gillespie & Powers Inc....
Alba Chairman Inaugurates the New Jetty Extension & Additional Raw Materials’ Storage Facilities at the Company’s Marine Terminal
Aluminium Bahrain B.S.C. (Alba)’s Chairman of the Board of Directors, Shaikh Daij bin Salman bin Daij Al Khalifa, inaugurated the Company’s Marine Jetty Extension in a ceremony that was held on Monday 30 August 2021, with the presence of Alba’s Chief Executive Officer, Ali Al Baqali, and other Company’s officials. The ceremony marked the successful completion of a master project that aimed to upgrade the existing Marine facility and expand its capacity to meet the Company’s increased production following the commissioning of Reduction Line 6, which boosted Alba’s overall output by more than 50%. As part of this project, the North Jetty at Alba’s Marine was extended by 24 metres to accommodate bigger ships such as 60,000 tonnes Panamax alumina vessels and be able to receive more than 3...
Mecfor and Advanced Dynamics merge to form EPIQ Machinery: A new North American leader in equipment designed and fabricated for the aluminium, pulp and paper, and rail industries
Mecfor, the Saguenay-based North American leader in specialized mobile equipment for the aluminium and rail industries, and Saint-Bruno-based Advanced Dynamics, a premier manufacturer of heavy-duty material handling equipment for the primary and secondary aluminium industries and the pulp and paper industry, announced today that they have fully merged their operations. The newly formed company will be known as EPIQ Machinery. Mecfor and Advanced Dynamics, two companies with shared values and complementary expertise have merged to seize a unique opportunity to make EPIQ Machinery a North American leader in mobile and heavy equipment for the aluminium, pulp and paper, and rail equipment industries. EPIQ Machinery now has the critical mass needed to accelerate international growth by...
Beyond the Horizon: AZ China to hold next virtual conference on 16th – 18th November 2021
AZ China Ltd. will be holding its next conference virtually from 16th to 18th of November 2021. This year the conference brings industry leaders and many sought-after speakers from China and the world to discuss the future of the industry globally. AZ China is a leading consultancy firm in China regarding the Aluminium industry. It is rated as one of the best aluminium conferences worldwide and an unprecedented platform connecting the world with China aluminium industry. The conference attracts people from all over the world to gather in China whose share of the global output is 60%. The topics are intended on the long-term outlook for the metal in a world focused on climate change, green aluminium and recovering from COVID-19. "We will take you past the short-term 'noise', we will look...
