Giant art installation unveiled at Trafford centre for recycle week
Every Can Counts (ECC) has unveiled a giant art installation outside Trafford Centre to highlight the importance of recycling during Recycle Week 2026 (14th – 20th September). The Infinity Sculpture, made from more than 1,200 recycled drink cans, has been created to illustrate the life cycle of a drink can, highlighting that aluminium can be recycled time and time again. Shoppers and centre visitors can get a glimpse of the can-based artwork that will be on display by the Great Hall Entrance at Trafford Centre until Sunday 20th September to mark the occasion. This is the first time the Infinity Sculpture has been showcased in Manchester, where it will act as a physical reminder of the importance of recycling to the community. On Saturday 19th and Sunday 20th September, visitors wanting to...
Aluminium Extruders Council launches “Look No Further” program
The Aluminium Extruders Council (AEC) today announced the launch of “Look No Further™,” a campaign promoting the capabilities, responsiveness, and innovation of US and Canadian aluminium extruder members of AEC. Developed for manufacturers, engineers, architects, designers, and procurement leaders, the campaign underscores the value of working with AEC extruder members to meet growing demand for aluminium extrusion solutions across transportation, building and construction, consumer products, electrical, machinery and equipment, and other critical markets. “Customers need domestic extrusion partners that can deliver more than shaped aluminium,” said Jason Weber, President of the Aluminium Extruders Council. “The Look No Further™ campaign will reinforce that AEC extruder members offer the...
Grow with
AL Circle
India’s building materials industry gets a new AI assistant
India’s building materials sector witnessed the debut of a new digital assistant with the launch of MatGenie at the ZAK Expo in Mumbai. Developed by Aludecor, MatGenie is designed to support architects, developers, contractors and fabricators in making faster, clearer material-related decisions - at a time when construction projects are increasingly challenged by cost pressures, safety requirements and performance expectations. The launch attracted steady interest at the expo, drawing industry professionals keen to understand how an AI-driven assistant could integrate into their daily workflows. Visitors engaged with the tool to test whether an app could realistically guide decisions that are often influenced by site conditions, climate, design intent, regulatory norms and budget...
AM Green Metals and Materials and Mitsui & Co., Ltd. sign MoU to explore low-carbon aluminium production
AM Green and Mitsui & Co. Ltd. (“Mitsui”) have signed a Memorandum of Understanding (MoU) to explore the following: • Strategic collaboration and broader energy transition opportunities • Potential investment pathways across low-carbon aluminum AM Green, via its wholly owned subsidiary, AM Green Aluminium Metals and Materials (”AM Green Metals”), is building a 1 million tonnes per annum (MTPA) primary aluminum smelter and 2 MTPA alumina refining and mining operations. In November 2025, AM Green signed an MoU with Andhra Pradesh (AP) government to set up 1 MTPA green aluminum complex in AP. Also read: Guinea-Conakry begins construction of Boké alumina refinery Both aluminum smelter and alumina refinery will be powered by renewable wind and solar firmed up by pumped hydro storage. In May...
ASI certifies HAL ALUMINUM MEXICO against Performance Standard V3
HAL ALUMINUM MEXICO S.A. DE C.V. has achieved ASI Performance Standard V3.1 (2023) for the manufacture of parts for the automotive industry using aluminium high pressure die casting at Plants 1 and 2 of their facility located in Guanajuato, Mexico. Aluminium Stewardship Initiative (ASI) today announced that HAL ALUMINUM MEXICO S.A. DE C.V. has been certified against the ASI Performance Standard V3.1 (2023). The entity operates two production units focused on aluminium high-pressure die casting for the automotive industry, incorporating machining, assembly and near-net-shape processes. Its facilities utilise advanced casting and precision machining technologies to produce automotive components in line with stringent technical requirements. The ASI Certification program was developed...
ASI certifies AL INVEST Břidličná against Performance Standard V3.1
AL INVEST Břidličná has achieved ASI Performance Standard V3.1 (2023) for the development and production of rolled semi-finished products from aluminium and its alloys, production of cast plates and development and production of aluminium foil and flexible packaging materials at their production facilities located in Břidličná, Czech Republic. Aluminium Stewardship Initiative (ASI) today announced that AL INVEST Břidličná, a.s. has been certified against the ASI Performance Standard V3.1 (2023). The facility produces rolled aluminium products and packaging materials for industrial and consumer applications, using processes including billet melting and casting, rolling, annealing, slitting and surface treatment. Its operations are supported by laboratories, maintenance workshops, a...
EGA and Sunstone to begin construction of anode manufacturing plant in UAE in 2026
Emirates Global Aluminium, the largest ‘premium aluminium’ producer in the world and Sunstone, the world’s largest independent pre-baked anode producer, today announced that construction of an anode manufacturing plant in the United Arab Emirates will begin in 2026. The new anode manufacturing facility will have a capacity of 300 thousand tonnes of anodes per year. In line with Make it in the Emirates and the UAE’s Operation 300 billion industrial growth strategy, production from the new plant will replace most of EGA’s current anode imports and make the UAE one of only a few countries to export anodes globally. First anode production is expected as early as 2028. Must read: Key industry individuals share their thoughts on the trending topics EGA and Sunstone today signed a Joint Venture...
IBAAS announces two prestigious international aluminium industry events in 2026
The International Bauxite, Alumina & Aluminium Society (IBAAS) is pleased to announce the organisation of two major international conferences and exhibitions in 2026, bringing together global leaders, researchers, policymakers and industry professionals from across the aluminium value chain. These flagship events will serve as important platforms for knowledge exchange, technology showcase, networking and collaboration in the rapidly evolving bauxite, alumina and aluminium sectors. 1. 14 th International Bauxite, Alumina & Aluminium Conference & Exhibition (IBAAS–2026) Date: September 9–11, 2026 Venue: Mayfair Hotels and Resorts, Jharsuguda, Odisha, India Located at the heart of India’s aluminium hub, IBAAS–2026 will focus on current industry challenges, technological advancements,...
Yinhawangka Aboriginal Corporation and Rio Tinto sign Interim Modernised Agreement
Yinhawangka Aboriginal Corporation and Rio Tinto have signed an Interim Modernised Agreement, marking an important step in their long-standing relationship. This interim agreement builds on the 2013 Participation Agreement between the Yinhawangka People and Rio Tinto. It sets out how both parties will work together and establishes a pathway to a fuller modernised agreement that will govern how Rio Tinto operates on Yinhawangka Country for the long term. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain The agreement introduces a co-management approach that reflects modern expectations for partnership. Yinhawangka will be involved earlier and more meaningfully in mine planning, with both parties working together in making key decisions...
Alupro urges households to recycle aluminium packaging this Christmas
With aluminium packaging waste set to soar over the festive period, Alupro is calling on households to think carefully about how they dispose of their rubbish and ensure recyclable materials are placed in the correct bin. Recent data from DEFRA suggests that around 175 million mince pies are purchased at Christmas, with the foil cases alone expected to fill two shipping containers.* When you add in the huge volumes of chocolate and cooking foil, foil roasting trays, empty aerosols, drink cans and metal bottle tops used during December, the mountain of recyclable aluminium starts to build up fast! While this material can be easily recycled at the kerbside, an estimated 3,000 tonnes is incorrectly disposed of and therefore ends up in landfill.** Whether laziness, convenience or simply a...
Vedanta Aluminium powers India’s energy goals, consuming 1.57 billion units of green energy in FY25
Vedanta Aluminium, India’s largest aluminium producer, announced that it consumed 1.57 billion units of renewable energy in FY25, marking a major step forward in its 2030 decarbonisation roadmap. Alongside this, Vedanta Aluminium reported an 8.96 per cent reduction in GHG-emissions intensity since FY21, strengthened its long-term plan to source ~ 1,500 MW of renewable power, and continued to scale energy-efficiency projects across operations, underscoring its leadership in India's low-carbon manufacturing transition. In FY25, Vedanta Aluminium expanded its renewable-energy portfolio through long-term renewable power-purchase agreements, positioning clean energy as a central pillar of its operational strategy. Vedanta Aluminium has also substantially progressed across energy conservation,...
KETO motors signs MoU with Telangana Government for INR 300 crore electric bus manufacturing facility
KETO Motors has signed a Memorandum of Understanding (MoU) with the Government of Telangana at the Telangana Rising Global Summit 2025, held at Bharat Future City, to establish a state-of-the-art electric bus manufacturing facility in Jadcherla. The project, with an investment of INR 300 crore, will focus on 9-metre electric buses and is expected to create over 2,000 direct jobs within three years. Shri D. Sridhar Babu, Minister for Information Technology, Electronics & Communications, Industries & Commerce, and Legislative Affairs, Telangana, was present for the MoU signing. The Government of Telangana will support the project by facilitating all statutory and regulatory approvals through the TG-iPASS single-window system, further reinforcing the state’s position as a growing hub for...
Ball to acquire majority stake in European beverage can manufacturer Benepack
December 10, 2025: Ball Corporation (NYSE: BALL) announced that it has entered into definitive agreements to acquire a majority stake in Benepack's beverage can manufacturing businesses in Europe consisting of its two production facilities in Belgium and Hungary. Benepack is a regional producer of aluminum beverage cans serving both international and local customers across Western and Eastern Europe. Under the terms of the agreements, Ball will acquire an 80 percent stake, for a total estimated cost of approximately €184 million, an attractive purchase price that reflects the strategic fit, geographic complementarity and high-quality footprint of the Benepack business. The remaining 20 percent interest will continue to be held by existing Benepack shareholders. All required regulatory...
NEW ‘Mastering the Building Safety Act’ CPD - turning compliance into design leadership
Reynaers Aluminium UK, a leading manufacturer of sustainable architectural aluminium systems, has unveiled a new CPD to support confident specification of glazing systems and facades under the Building Safety Act (BSA) framework. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain In its latest CPD, titled ‘Mastering the Building Safety Act: Architects, Glazing Systems, Safe Passage, and Holding the Golden Thread’, Reynaers explores how the BSA affects both the specification and design of glazing and façade systems. The third CPD in a series written by an architect for architects, the CPD was developed by Vice President of the Manchester Society of Architects, Paul Iddon and provides practical insights into the changing role of architects under...
SECO/WARWICK selected again by Chinese partner for advanced CAB line upgrade – Replacing legacy system with next-gen thermal technology
The SECO/WARWICK Group will carry out another project in China – this time delivering a complete, continuous controlled atmosphere brazing (CAB) line for the production facility of one of the leading suppliers of air conditioning and engine heat management components for vehicles. This is the second order from this Partner within the SECO/WARWICK Group, and the first directly executed by the SECO/WARWICK Group’s Chinese Subsidiary. The new brazing line with a 1600 mm wide belt includes a preheating chamber, a radiant heated brazing furnace, an air-cooled chamber, a final cooling chamber and a control system. “This is a very important project, not only due to the renewed trust from our Partner, but also because the new line will replace a solution that has been operating in this plant...
Lotte Aluminium awards FAC to AMOVA for new high-bay warehouse for aluminum coils in Elizabethtown
The new high-bay warehouse at Lotte Aluminium can accommodate 500 coils or up to 6,000 tons of load capacity. Two stacker cranes in one aisle, integrated coil transport systems, and a range of automation solutions reduce handling by 30 to 60 per cent and ensure direct access to every product. The AMOVA warehouse management software, seamlessly integrated into SMS group’s MES and QES, provides real-time material tracking and contributes significantly to the digitalisation and optimisation of production processes On November 19, 2025, US aluminium manufacturer Lotte Aluminium USA LLC granted AMOVA, a brand of SMS group, the final acceptance certificate (FAC) for the supplied high-bay store. For Lotte Aluminium, this innovative high-bay store is a milestone in terms of both coil logistics...
Alupro sustainability manager to help DEFRA prepare for DRS
Martin Hyde, sustainability and public affairs manager at Alupro, will soon embark on a 12-month secondment with DEFRA. The move will see him temporarily take up the role of Industry Liaison for the pending Deposit Return Scheme (DRS) for drinks containers. Beginning in January, Hyde will effectively bridge the gap between the packaging industry, DEFRA, the DMO and wider stakeholders. He will be responsible for identifying any emerging issues and working with the DEFRA DRS team to consider any areas that need Government support to move forward. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain Hyde will return to Alupro in January 2027 and continue his work leading the team’s public affairs and sustainability programme. In the interim,...
Ground breaking ceremony of pilot plant for recovery of Metal-G from spent liquor of alumina refinery at NALCO
In a significant step towards a cleaner, greener future, the Heavy Water Board (HWB), in collaboration with Bhabha Atomic Research Centre (BARC), has started construction of a demonstration plant for the recovery of valuable metals from the spent liquor of an alumina refinery based on the Ion-Exchange (IX) process. This pioneering project, located at the NALCO, Damanjodi, Odisha, marks a crucial milestone in India’s efforts to transition towards self-reliance in semiconductors. The ground-breaking ceremony was held on 20th November 2025, at NALCO refinery in Damanjodi, Odisha, by Shri S. Satyakumar, Chairman & Chief Executive, Heavy Water Board (HWB) and Shri Brijendra Pratap Singh, Chairman and Managing Director, NALCO. The Occasion was graced by prominent figures, including Dr...
EAS aluminium advances construction of its integrated production campus strong momentum continues as the company targets further expansion in 2026
EAS Aluminium is rapidly moving forward with the construction of its 35,000 square metre integrated production campus in the Edirne Organised Industrial Zone, marking another significant milestone in the company’s long-term growth strategy. Structural works have reached an advanced phase, exterior cladding and roofing installations are nearing completion, and preparations for internal process areas are actively underway. Once operational, the facility will house a fully automated Presezzi Extrusion line, high-efficiency cooling technologies, advanced powder-coating systems, and a digitally traceable production infrastructure — all under one roof. Explore- Most accurate data to drive business decisions with 50+ reports across the value chain EAS Aluminium General Coordinator, Ferit...
EUROBOND launches EURODUAL, becomes one of the first Indian Brands to produce Engineered Solid Panels
EURODUAL is built with PVDF-coated marine-grade 3105 and 5005 aluminium alloys, and offers 15 & 20 years of warranty. Euro Panel Products Ltd, the parent company behind EUROBOND - one of the leading Metal Composite Panel Brands in India, today launched EURODUAL, a pre-coated engineered solid panel crafted for superior surface quality and structural performance. The introduction of EuroDual also makes Euro Panel Products Ltd one of the first Indian companies to launch Engineered Solid Panels that laminate two solid sheets together, marking it as a significant milestone for the facade industry of India. EURODUAL will be produced at the company’s Umbergaon facility, which houses a state-of-the-art continuous coil coating technology. What sets EURODUAL apart are its enhanced mechanical...
