Metabo offers a new range of pneumatic framing nailers and aluminium magazines

Metabo HPT has declared the launch of their latest pneumatic nailer series with the introduction of the 3-1/4-in. 21° Framing Nailer having Aluminum Magazine and Depth Adjustment (NR83A5Y) and 3-1/4-in. 21° Framing Nailer having Aluminum Magazine without Depth Adjustment (NR83A5S1).

Moreover, the high-grade Aluminium Magazine can be availed specifically for instalments on any NR83 model buyable from the market nowadays for increased variability according to the user’s customisation.

The 21° Aluminum Magazine for Metabo HPT NR83 Series Nailers (part # 890624) is compatible with any Metabo HPT NR83 series pneumatic nailer. The Aluminium Magazine has been formulated with high-grade aluminium alloy for extreme endurance. The Aluminium Magazine can hold up to 50-70 nails embedded in two separate strips. It also accepts 21° plastic collated nails ranging in length from 2-in. up to 3-1/4-in. in length and .113-in. to .131-in. in diameter.

These latest pneumatic nailers showcase similar characteristics or functionalities as the NR83A5 series, but at this moment, they come enhanced with Aluminium Magazines that save the device from being stuck.

The 3-1/4-in. Plastic Strip Collated Framing Nailer with Aluminum Magazine and Depth Adjustment (NR83A5Y) can be fitted with any wood shape since it has a toolless depth of drive adjustment for added support and malleability. The 3-1/4-in. Plastic Strip Collated Framing Nailer with Aluminum Magazine (NR83A5S1) is practically available without any added leverage for Depth Adjustment.

Each nailer displays a Metabo HPT cylinder valve driving system, which controls the cylinder to open or close the valve. The cylinder valve system can clean itself and is totally resistant to grease or grime buildup.

The latest A5 framing nailers with Aluminum Magazines have the allotment for 21° plastic collated nails ranging from 2-in. to 3-1/4-in. in length and .113-in. to.131-in. in diameter. The Aluminium Magazine can fit up to two strips of nails at once and also owns a locking feeder system for restorations. The robust claw tip does not allow the nose to be eroded, also lessening the chances of slippage while performing an angled drive or “toe-nailing”. The item can be bought with factory procured ¼-in. industrial fittings with a suggested operating air pressure of 70-120 psi.

The A5 series also includes heavy-duty rafter hooks that can be stuck to the left or right side of the nailers. In the circumstances of a lodged nail, the open nose gives access to clearing the jam, opening the pathway.