Calculate Embedded Emissions for Unwrought Aluminium (HS7601)

Enter your input

Payable emissions (tCO₂e/t)

Total CBAM Cost (€)

Notes:
There may be a difference when calculating the price with respect to import volume, carbon price, and benchmark emissions, as the embedded formula may result in minor variations due to decimal rounding. Therefore, the actual value may vary.

CBAM is applicable to trade volumes starting from 50 metric tonnes. For trade volumes below 50 metric tonnes, CBAM does not apply.

Usage Procedure – How to use the CBAM Calculator Sheet

Enter or update values only in the INPUT
PARAMETERS section (Highlighted in blue) , including
the carbon price, benchmark emissions, CBAM
chargeable percentage (as per the phase-in year),
and imported quantity.

The system will automatically calculate the payable
emissions and the total CBAM cost (€) based on the
inputs provided.

Notes:
• Change any input value to automatically update CBAM cost.
• Formula used: Carbon price × payable emissions × quantity.
• Model aligned with CBAM supplier-side illustrative methodology.

05 MARCH 2019 AL CIRCLE

Hufschmied presented its Milling Systems for Aluminum and Graphite Processing at Intec in February 2019

EDITED BY : BEETHIKA BISWAS 1MINS READ

Hufschmied presented their range of machining tools designed especially for aluminium machining at Intec in February 2019. These tools deliver good surface qualities when machining aluminium honeycombs, plates, and profiles with help of their specially adapted cutting edge geometries.

{alcircleadd}

Hufschmied’s large selection of tools helps in roughing and finishing without the need to change tools in a significantly shorter time. Hufschmied also offers wear-resistant welding pins for friction stir welding of aluminium and aluminium alloys with minimum effort.

In cooperation with the erosion experts from Exeron GmbH, Hufschmied also used the Intec for the presentation of the new Graftor tool series, which, thanks to its diamond coating, features a low cutting pressure.

The blades of the cutting tools are ideal for processing delamination-sensitive materials such as honeycomb plates or fabric stacks. The plasticized aluminium material is compressed by means of the tool shoulder on the friction pin, creating the desired solid, fluid- and pressure-tight connection seam between the workpieces.

The tool manufacturer Hufschmied specializes in process optimization in the machining of difficult materials and presented its know-how at Intec in February 2019.

Tagged with: