India’s renewable energy transition is gathering pace, with installed renewable power capacity surpassing 300 gigawatts (GW) in 2026, almost quadrupling over the past decade. The country has also achieved its target of sourcing 50 per cent of installed electricity capacity from non-fossil fuel sources five years ahead of schedule, strengthening its position as one of the world’s fastest-growing clean energy markets. The expansion is beginning to deliver measurable energy security benefits by reducing dependence on imported fossil fuels, while competitive renewable power costs and expanding domestic manufacturing are opening new investment opportunities. However, sustaining this momentum will require substantial improvements in electricity transmission, storage infrastructure and...
Glencore has defended its progress on the Aurukun bauxite project in Queensland, saying it has met all commitments under its licence conditions, as calls for greater scrutiny mount over its proposed sale to Rio Tinto. Queensland MP Robbie Katter, a member of the Parliamentary Primary Industries and Resources Committee, is seeking an inquiry into the deal. The reported sale value has been put at USD 250 million, though this figure has not been confirmed. Katter questioned why a multinational company should hold a public resource without developing it and then sell its interests. He said, “That resource is owned by the people of Queensland, it’s not the government’s to play around with, or for any of these global mining companies to just trade.” Explore the production, demand and...
Grow with
AL Circle
LME aluminium opened at US$2,342 per tonne on Thursday, with its high and low at US$2,367 per tonne and US$2,327 per tonne, respectively, before closing at US$2,340 per tonne, a drop of US$0.5 per tonne or 0.02 per cent. On Thursday, April 6, both LME aluminium cash bid price and LME aluminium official settlement price dipped by US$5.5 per tonne or 0.23 per cent to settle at US$2,300 per tonne and US$2,300.50 per tonne. 3-month bid price and 3-month offer price slipped by US$13 per tonne or 0.55 per cent and US$13.5 per tonne or 0.57 per cent to halt at US$2,340 per tonne and US$2,340.50 per tonne. December 24 bid price and December 24 offer price dropped by US$17 per tonne or 0.66 per cent to close at US$2,533 per tonne and US$2,538 per tonne. LME aluminium opening stock settled at...
A billet is one of the most widely used aluminium product forms globally. Billets are created directly through continuous casting or extrusion or indirectly through hot rolling an ingot or bloom. The billet is normally suitable for alloyed aluminium. As per the data, on Thursday, April 6, the aluminium billet inventories surged by 6,100 tonnes W-o-W to score at 164,500 tonnes. This week, there were 5,900 tonnes more billet arrivals in South China, which pressured local merchants to sell and reduced conversion margins. East China's demand decreased significantly, although local billet supplies did not move considerably since several warehouses stopped receiving shipments. The figure below provides further information on the current state of aluminium billet inventories in China: As per the...
Trek Bikes has recently launched the third generation of its Émonda ALR series, Émonda ALR 5, one of the lightest aluminium road bikes. The new Émonda ALR frameset employs the same racing geometry as Trek's carbon road cycles and includes integrated cables and Kammtail tube profiles. The bike will be offered in two versions, the ALR 5 and ALR 6, as well as a frameset. Trek switches from the press-fit bottom bracket used on the previous Émonda ALR to a threaded T47 bottom bracket in line with its other new cycles. The Trek Émonda ALR 5 is claimed to weigh 9 kg, and the ALR 6 is expected to weigh 8.8 kg when fully assembled. According to Trek, the Émonda ALR is constructed from ultra-light 300 Series Alpha Aluminum. Alpha Aluminum was created to develop more flexible frameworks with the...
California Olive Ranch™ has reportedly launched a new line of fully recyclable and eco-friendly aluminium bottles, establishing the brand’s commitment to achieving broader sustainability and quality goals. The new packaging was launched online on April 5, 2023, with three varieties of olive oil 100% California Extra Virgin Olive Oil, Avocado Blend and Reserve Blend Extra Virgin Olive Oil. The product will be available online and at selected retail partners across the United States. California Olive Ranch claims its new packaging is the most lightweight so far. The brand, with the new aluminium bottles, aims to address customers’ demand for sustainably packaged products at affordable price. Another USP of the packaging is it has a bisphenol A-free liner and a high-density polythene plastic...
The state of Iowa has allotted US$2 million in funding to upgrade the water infrastructure at Arconic’s facilities in Riverdale. This can be regarded as one of the five awarded grants deployed by the state sanctuary. Arconic has calculated this upgradation might decrease water withdrawal by over 77 per cent, propelling water conservation efforts initiated by the company. The company will receive an assimilated sum of US$2,205,277 for reverse osmosis solutions and water filtration systems to revitalise wastewater generated during production. The Iowa state funding will suffice for half of the US$4.4 million endeavour. As soon as Arconic optimises the new water units, it will exponentially lower the amount of freshwater intake (also termed as water withdrawal) by almost 77 per cent....
Safran, a global path leader in the aviation sector, defence and space markets, has decided to install SLM Solutions’ NXG XII 600 metal Additive Manufacturing machine for the manufacture of bespoke aluminium components for its prevailing and futuristic projects. Safran Group, headquartered in France, has opted for the twelve 1 kw laser power NXG XII 600 Laser Beam Powder Bed Fusion (PBF-LB) machine from Germany’s SLM Solutions. The Additive Manufacturing machine will be extremely crucial for the production of huge precisely engineered aluminium parts for the company’s existing aircraft and other futuristic production lines, including the next-generation programmes. The new NXG XII 600 metal Additive Manufacturing machine will be housed in the company’s 3D printing compound in Le Haillan,...
The 12th edition of the Aluminium Two Thousand Congress, one of the most awaited conferences for the players of the aluminium industry, will be taking place from September 19 to September 23 at the Royal Hotel Carlton, Bologna, Italy. The conference aims to bring together technical and scientific experts, disseminate their knowledge, and establish an international community to discuss current and potential developments in the field of extrusion and its most potent tool, numerical simulation. The concurrent International Conference on Extrusion and Benchmark (ICEB) has grown to be the major European gathering for the study of recent advancements in extrusion technology using FEM simulation. The ICEB conference will also maintain its critical components for the 2023 iteration by combining...
A recently formed segment of the Airbus Group, Airbus Atlantic began producing lithium-aluminium components for the initial parts of its new A350F freighter model at the Nantes facility in France. This is the first stepping stone in the formation of a new aircraft and is essentially addressed as "the first metal cuts". The conventional flight parts are made of carbon fibre, but the company has explored the potential of lithium-aluminium bonding in this case. As per the records of Airbus Atlantic, the very first part manufactured for the A350F freighter was the core wing box, a continuous structure that aligns the aircraft's wings. In comparison with the A350 flight models, the component developed for the A350F is super-reinforced, composed of a rigid mixture of aluminium and lithium to...
In the first two months of 2023, North America produced 613,000 tonnes of primary aluminium, of which 321,000 tonnes was produced in January and 292,000 tonnes in February, found the International Aluminium Institute. The data indicates the output in February fell by 9.03 per cent month-on-month. However, on a year-on-year calculation, North America’s primary aluminium production in February’23 recorded a very marginal growth of 1,000 tonnes from 291,000 tonnes. The production in the first two months of this year also recorded an increase of only 1,000 tonnes from 612,000 tonnes, according to IAI. The daily average output of primary aluminium in North America stood at 10,400 tonnes during February 2023, reflecting no major change from 10,300 tonnes in January. On an annual basis, the...
Anthony Karlovic, the founder of First Avenue Homes, has used Capral Aluminium doors and windows to complete their home. Located in Melbourne's Brighton East area, the house has won many accolades, including the HIA Custom Home of the Year ($750,000- $1 million) and the HIA Victorian Kitchen of the Year. First Avenue Homes meticulously planned and built every element of the house to give the Karlovics the living and entertainment experience they desired. The custom five-bedroom, three-bathroom home combines elegance and usability throughout its roomy, well-lit areas. According to Karlovic, selecting the right window and door systems were crucial for this house because it needed premium, specially-made systems with cutting-edge utility that could support wide swaths of glass. "Capral...
LME aluminium moved all the way down to a low of US$2,325 per tonne after opening at US$2,372 per tonne on Wednesday, and closed the day at US$2,340.5 per tonne, a drop of US$34.5 per tonne or 1.45 per cent. On April 5, Wednesday, the LME aluminium cash bid price slumped by US$35 per tonne or 1.49 per cent and the LME aluminium official settlement price dropped by US$35.50 per tonne or 1.52 per cent to close at US$2,305.50 per tonne and US$2,306 per tonne. The 3-month bid price and the 3-month offer price plunged by US$40 per tonne or 1.67 per cent halting at US$2,353 per tonne and US$2,354 per tonne, respectively. December 24 bid price and December 24 offer price halted at US$2,550 per tonne and US$2,555 per tonne with a fall of US$33 per tonne or 1.27 per cent. LME aluminium opening...
Queensland Government has reportedly offered a grant of up to $2.17 million to Alpha HPA, the Australia-based and globally focused high-purity aluminium products manufacturer. The funding will be used to support Stage 2 of Alpha’s first high-purity alumina facility in Gladstone. In a statement to the ASX on Wednesday, April 5, Alpha said the funding from Queensland Government would support capital expenses for Stage 2 of the high-purity alumina plant. Stage 1 of the plant is currently undergoing a ramp-up to produce the full-range of Alpha’s high-purity materials, receiving support from a $15.5 million Critical Minerals Accelerator Initiative in April 2022. Alpha HPA’s Managing Director Rimas Kairaitis said, “Alpha welcomed the funding, and we welcome the state’s recognition of Alpha’s...
Djuce, a business that produces sustainable canned wine, announced its entry into the US market. They will start on the West Coast in Los Angeles, San Francisco, and San Diego. Djuce was established in Stockholm, Sweden, in 2022 to revolutionise wine drinking. At the centre are renowned European winemakers, gifted artists, and environmentally friendly aluminium cans. Due to aluminium's 28 times greater recycling efficiency and the fact that three-quarters of all aluminium ever mined is still in use today, moving from glass bottles to cans reduces packaging-related CO2 emissions by 79 per cent. Natural oenophiles who choose Djuce are making a significant impact on the environment. Djuce pokes fun at the established wine industry and its customs while drawing attention to the sustainability...
Quebec-based manufacturer of aluminium doors and windows, Fenplast, announced the successful acquisition of ADG doors and windows in Terrebonne through its subsidiary brand Altek Windows and Doors. Last month, the company bought a minor stake in Solarcom, a manufacturer of aluminium windows from Beauceville. Solarcom also is renounced for manufacturing bespoke aluminium fenestration solutions for use in the commercial or residential sector. The ownership of ADG was transferred to Fenplast on 1 April 2023, amplifying the latter's reach in the region. ADG will keep its facilities optimised for the uninterrupted manufacture of fenestration components for the construction and retail segment. The complete acquisition of ADG is important for Fenplast as this would substantially augment the...
Monseigneur Augustin Caron Elementary School will organise an e-waste & aluminium can recycling event . The event will be held on April 15 and April 22, during which the students will be taught the importance of recycling aluminium cans and electronic waste. The students have been asked to bring used, outdated and unwanted electronics to help generate money for their school while preventing electronic waste from going to the landfill. Not only this, but the school is also inviting residents of Windsor and Essex County to donate their used, outdated, damaged and unwanted devices and aluminium beverage cans. Items like computers, laptops, VCRs, DVD players, printers, fax machines, mobile phones, radios, TVs, microwaves, toasters, curling irons, hair dryers, and electric toothbrushes can be...
Confoil, a food packaging maker hailing from Australia, has amplified the manufacture of smoothwall trays at its regional plant in Melbourne due to a massive investment in brand-new presses. Confoil is a privately owned Australian firm that can trace back its origin to half a century. The lineage is still active, working relentlessly on the field to keep up the family name. The CEO of Confoil, Alison Buxton, exclaimed: “This substantial investment has been driven by growth and demand of our popular smoothwall trays.” “We are seeing an increase in interest for locally produced packaging. Especially in the areas of ready-made meals, ready-to-cook meal kits and pre-prepared cuts of meat,” he added. Smoothwall trays are composed of rigid, heavy-gauge aluminium with a flexible flange so that...
In January 2023, the United States exported 63,000 tonnes of aluminium plates, sheets and bars compared to 55,200 tonnes in December 2022. That reflected an increase of 7,800 tonnes or 14.13 per cent month-on-month, found the US Census Bureau data. However, in December, the export volume plunged by 8,900 tonnes month-on-month from 64,100 tonnes. On a year-on-year calculation, the United States aluminium plates, sheets and bars exports in January 2023 reflected a sharp rise of 29,900 tonnes or 90.33 per cent from 33,100 tonnes. To Mexico, the second highest destination of aluminium plates, sheets, and bars exports, the United States supplied 23,600 tonnes of FRPs in January 2023. That was a month-on-month increase of 8.26 per cent from 21,800 tonnes and a year-on-year rise of 97 per cent...
Under the guidance of its parent company, DIC Corporation, Sun Chemical has developed a full range of metal decorating products for two- and three-piece cans, collapsible aluminium tubes and monobloc aerosol cans and bottles. This new move will support can manufacturers, converters and brand owners looking for more sustainable packaging upgrades. Sun Chemical’s SunColorBox colour management toolkit comes equipped with a fully integrated designing portal and press, making it the preferable choice for brands that demand consistent colouring techniques for their flagship production line. From the toolkit, SunDigiProof is the one service that will appeal the most to the metal packaging sector as it permits a simulating round wherein the user may determine the outcome of the print on an...
