
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

The world’s primary aluminium production regained momentum in October 2024 after an intermittent decline of 3.19 per cent in the previous month. Owing to the increase across all the major primary aluminium-producing regions, the world’s output reached a new high in October, exceeding all the earlier records. Recovering more than what it lost in September, the world’s primary aluminium production in October even exceeded the record volume of 6.205 million tonnes seen in August. According to the International Aluminium Institute’s (IAI) data, the output volume in October grew by 3.56 per cent M-o-M and 1.27 per cent Y-o-Y, reaching 6.221 million tonnes. In September 2024, the world’s primary aluminium output was 6.007 million tonnes; in October 2023, it stood at 6.143 million tonnes. The...

On Tuesday, October 29, Ruixin Technology announced plans to support its overseas business expansion by establishing a production base in Thailand. The company, in collaboration with its wholly-owned subsidiary Ruixinchang (Hong Kong) Co., Ltd., has jointly invested in the creation of Ruixin Technology (Thailand) Co., Ltd. Ruixin Technology is a leading domestic high-tech enterprise specializing in the research, development, production, and sales of industrial precision aluminium alloy components. The project aims to establish a production base in Beiliufu, Thailand, by leasing a 2,576-square-meter workshop. Ruixin Technology (Thailand) Co., Ltd. will introduce advanced production equipment, including the Shenya T10 vertical machining centre, a CNC automatic line, and an ultrasonic...

The European market for aluminium alloy ingot has experienced a significant devaluation, with both Germany and Turkey playing a pivotal role. Their substantial price reductions, amidst economic challenges and struggles in the automotive sector, have contributed to a pronounced downward trend in the week ending November 15th. Image source: https://www.sav-al.com/ Germany rolls downhill According to chemanalyst.news, Germany's aluminium alloy ingot prices dropped by 2 per cent as the country struggles with financial challenges. Its economy is in recession for two years in a row. In H1 (first half) of the ongoing year (2024), it contracted by 0.2 per cent compared to the same duration in 2023. The nation's financial growth course has witnessed multiple speed breakers affected by insufficient...

On October 24, Minfa Aluminum announced its plan to establish Gansu Minfa Aluminum Co., Ltd., aimed at advancing its strategic development and broadening its market presence. The new company will be jointly funded by Minfa Aluminum and Gansu Zhongsheng Aluminum Co., Ltd., pending approval and registration by relevant industrial and commercial authorities. Image Source: CHAL Aluminium Corporation Gansu, a province in north-central China, is renowned for its historical landmarks. The city of Jiayuguan stands out for its iconic Overhanging Great Wall and the majestic Jiayuguan Pass fortress complex, both integral parts of the Great Wall of China. Gansu Minfa will have a registered capital of RMB 5 million, with Minfa Aluminum contributing RMB 3.5 million for a 70 per cent stake. At the same...

Primetals Technologies has successfully signed the Final Acceptance Certificate (FAC) with Hulamin, a leading aluminium producer, following the installation and commissioning of advanced hot edge inductors for the cold mill rolling line (S5) in Pietermaritzburg, South Africa. This upgrade targets eliminating tight edge issues in aluminium strips encountered during high-speed rolling, significantly enhancing product quality. Image Source: Primetals Technologies The newly installed moving induction heating head assemblies are strategically positioned on the exit side of the mill, beneath the exit delivery table. These assemblies, placed just outside the strip width near the roll surface, effectively mitigate thermal camber, addressing the tight edge challenges during high-speed rolling...

Alcoa Corporation, a name to reckon with in the global aluminium industry, has reportedly joined the World Economic Forum’s First Suppliers Hub, a platform created to bring together the innovative suppliers of materials needed to support the ambition of industrial decarbonisation in the world by 2050. Image Source: Alcoa Corporation The First Movers Coalition (FMC), which is also an initiative by the World Economic Forum in partnership with the United States government, has set a goal that 10 per cent of its members’ annual aluminium procurement volume should meet or exceed the standard of low-carbon primary aluminium determined by the Coalition. The benchmark set by the First Movers Coalition is below 3 tonnes of CO2e emissions per tonne of primary aluminium. To enable the FMC members to...

Speira is back with a bang! The enterprise has introduced its new 'transparent' melting furnace, which consumes 15 per cent less energy in all the processes with enhanced capacity, recycling, insights, and data collection. The company, known for its aluminium rolling and recycling, is investing close to 6.4 million euros in the new furnace which is planned to be placed in the Hamburg plant. The unit, internally referred to as 'Furnace 6', will come in lieu of the oldest model on the site, which dates back to the 1970s. This project is historically significant in successfully handling without any accidents during ongoing foundry operations. Enhanced production with reduced energy consumption "This new furnace is of great importance to us. It increases the performance and output of the...

The saga of the Austal-Capral duo dates back over two decades. As a key supplier of aluminium extruded products, Capral's contribution towards the landmark journey of Austal from being a modest fishing vessel manufacturer to Australia's leading shipbuilding company with a workforce of 5,000 from multiple countries across the globe is worth celebrating. United by shared values and a common vision, Capral and Austal have built a strong and enduring partnership over the past 25 years. Image Source: Austal Austal's high-quality commercial vessels primarily owe to Capral for its aluminium sheets, complex extrusions, and value addition to the business. "It's nice to have a supplier where we can share a vision, share values, and build a mutual relationship that benefits both parties," said Brent...

Earlier on Wednesday, March 6, Alupro and re3 (Reduce, Reuse, Recycle)—a waste partnership representing Bracknell Forest, Reading, and Wokingham Borough Councils—launched an exciting creative sculpture competition for local schools. The results of the competition are out and young winners have been announced. The competition was part of the 'Fantastic Foil' initiative, aimed at inspiring 190,000 households across the three boroughs to recycle aluminium foil and other aluminium packaging. Each winner received a £20 voucher, while their schools were awarded £100 vouchers for books, supplies, and activities. re3 (Reduce, Reuse, Recycle), a waste management partnership uniting Bracknell Forest, Reading, and Wokingham Borough Councils, has joined forces with Alupro to encourage residents in...

Reaffirming its focus towards environmental sustainability, Radisson Resort Ras Al Khaimah Marjan Island has full-fledged participation witnessed in the Emirates Environmental Group (EEG) Can Collection Drive 2024. Result? Collection of an impressive 30 kilograms of aluminium cans at the resort's significant initiative in an effort to reduce waste, promote recycling, and combat carbon emissions. The 2024 edition of the drive was held at the prestigious RAK Ceramics company, where participants came together to drop off their collections. The event witnessed notable engagement from various business firms, who aided in spreading the message of sustainability across different sectors. From small-scale initiatives to large corporate drives, the event saw participation from numerous and...

Singapore-based start-up Nandina REM is changing the game with a pioneering approach to aircraft recycling. The company transforms materials, including aluminium, into high-quality, ultra-low-emission, and traceable resources for industries like aviation and automotive. These materials can be used in new aircraft and diverse products, such as battery casings for electric vehicles. Nandina REM leverages advanced technology With major global trading houses like Sumitomo and aluminium leaders such as Press Metal on board, Nandina REM leverages advanced technology and material science to preserve the quality of aluminium alloys. By supplying high-grade secondary aluminium to manufacturers, the company helps reduce reliance on primary aluminium, promoting a more sustainable future. “We see...

Jerome Dozol, the chief executive of Tomago Aluminium since July, has recently contradicted the possibility of achieving the venture's agenda to switching to a primarily clean power supply subsequently this decade, citing that the pricing of the energy on offer was too hefty for the Tomago smelter near Newcastle (Australia) to continue operations without government aid. He has asked for 'urgent action' to ensure uninterrupted operations at the specified plant. The existing electricity supply contract to the smelting facility, which employs more than 1000 people, is with AGL Energy and expires at the end of 2028. Image Source: https://www.tomago.com.au/ Tomago conducted a comprehensive sounding of the electricity supply market this year with the goal of positively replacing the AGL...

The United States’ increased focus on the secondary aluminium industry led to a year-on-year decline in its primary aluminium production for another month but a rise in aluminium recovery from scrap. According to the data from the US Geological Survey, the United States’ primary aluminium production in August decreased 6,000 tonnes or 9.7 per cent year-on-year, while scrap recovery gained 17,000 tonnes or 6.07 per cent. Delving deeper into the data, we find the United States’ primary aluminium production in August stood at 56,000 tonnes against 62,000 tonnes in August 2023 and 57,000 tonnes in July 2024. In line with the decline in monthly production, the United States average daily production in August also slipped over the year as well as month. On a year-on-year basis, the daily output...

The Australian Aluminium Council (AAC) is set to strengthen the nation's aluminium industry by incorporating the Australian Aluminium Extrusion Association (AAEA) into its membership and organisational framework. This strategic integration establishes a unified, independent advocacy body representing the entire aluminium sector in Australia. Image Source: Australian Aluminium Council This integration will strengthen the Australian Aluminium Council's mission to foster a greater understanding of the domestic and international aluminium industry. By uniting these organisations, the Council seeks to drive the growth and sustainability of Australia's aluminium sector. As a cornerstone of the global transition to clean energy, aluminium is one of the most essential commodities. With its...

SENIOR Architectural Systems, a pivotal contributor to the new residential scheme, has introduced a trio of innovative products. These products have played an essential role in the metamorphosis of the once derelict site of Glasgow's Grade II listed Meat Market into a thriving community. Image Source: https://www.seniorarchitectural.co.uk/ The new affordable housing scheme, a tribute to the city's historic market area that dates back to the 1870s, has been developed by the housing association Home in Scotland and designed by architects JTP. The development comprises four blocks ranging from four to six storeys that house a total of 252 one and two-bedroom apartments. Accessibility has been paramount, with four individual apartments on each floor arranged around a central stair and lift...

VIVA Composite Panel Pvt. Ltd., Asia's largest aluminium composite panel (ACP) manufacturing company, has stood out with its innovative products in the Prawaas 4.0 exhibition. With a present production capacity of 12 million square meters per annum, VIVA aims to become a pan-India leader in the bus body segment in the coming days. Image Source: https://www.researchgate.net/ The company's selling propositions (USPs) include its vast production capacity, customisation capabilities, and exceptional service. "Our purpose is to become a pan-India leader. Our USP is our production capacity, customised colour, customised width, and most importantly, our serviceability," P S Raju, Zonal Sales Manager – Recreation Vehicles South India, Viva stated. At Prawaas, VIVA also brought forth its target to...

Vedanta's continued endeavour to shift its power sources to renewable energy has led to an agreement with GAIL Gas Limited, a subsidiary of GAIL (India) Limited, for the natural gas supply to Jharsuguda smelter. The transition to natural gas will expectedly become operational from the end of 2025, significantly reducing carbon footprint and minimising CO2 equivalent emissions by 47,292 tonnes annually. Image Source: Vedanta Aluminium This move is a significant part of Vedanta's ongoing journey towards achieving Net Zero emissions by 2050. The expedition contains two main strategies – one is increasing renewable energy usage and the other is creating carbon sinks through extensive afforestation. Natural gas supply from GAIL is primarily destined for Vedanta's upcoming 430-kilo tonnes per...

Kobelco Automotive Aluminum Rolled Products (China) Co., Ltd, a facility of Kobelco Group, has obtained Chain of Custody (CoC) Standard V2 (2022) Certification from the Aluminium Stewardship Initiative for the production and sale of thin automobile aluminium alloy plate and strip. Image Source: Kobelco As the name suggests, the company specialises in producing alumininium automotive components, such as aluminium alloy plates, sheets, and strips, with an annual aluminium capacity of 100,000 tonnes. The plant has production lines for heat treatment, surface treatment, longitudinal cutting, cross-cutting, and cleaning. This year, in March, the facility located in Tianjin, China, bagged the ASI Performance Standard V3 (2022) Certification . The facility of Kobelco Group has received the ASI...