
The environmental implications of a proposed aluminium smelter in Inola, Oklahoma, have come under scrutiny, with experts highlighting concerns over fluoride emissions, air quality and potential effects on local livestock and public health. At a special town meeting on Thursday, residents and town leaders heard the findings of an environmental risk evaluation commissioned by the town. The assessment was conducted by Jacobs Engineering Group, which was hired to examine the potential health and environmental effects of the proposed Oklahoma Primary Aluminum smelter, a joint project involving Emirates Global Aluminum and Century Aluminum. The facility is designed to produce up to 750,000 tonnes of aluminium annually. One of the key findings highlighted in the report was the estimated annual...
The global aluminium industry is facing an interesting contradiction, with bauxite production expanding, countries racing to establish domestic alumina refining capabilities, and China heading towards another record year of primary aluminium production. Yet, higher output does not necessarily translate into stronger pricing power, secure raw material availability or better market access. And evidently, the tension is becoming rippling across the entire aluminium value chain. Today we are going to connect the dots across the global bauxite, alumina and primary aluminium markets to examine how these developments may be today maybe five years from now intertwine into a singular market volatility. Bauxite supply: Guinea's pricing ambitions meet Ghana's processing plans Guinea produced almost...
Grow with
AL Circle

"Producing aluminium is technologically advanced. We therefore need good cooperation from universities like the Qatar University to educate the engineers of tomorrow producing the metal of the future, said Odd Ivar Biller, senior vice president in Hydro and Qatalum board member, at the Qatar Aluminium Symposium on November 24. The aluminium conference in Doha was hosted by the Qatar University and sponsored by the Qatalum aluminium company and the Norwegian aluminium company Hydro. The Qatar Aluminium Symposium covered highlights from the complete aluminium value chain, including production, fabrication and the use phase of aluminium. The symposium aimed to demonstrate the key attributes that make aluminium the material for the future, already in use today. "Hydro is very pleased with the...

Secondary aluminum alloy smelters in Spain and Italy are seeking to sell spot cargoes to Japan, but buying interest has been limited so far due to differences in ingot size specifications, Japanese market sources said Monday. Two Tokyo-based trading houses said they had received offers for ADC12 aluminum alloy from two European smelters in the last two weeks. The smelters are currently offering around $2,170/mt CFR Japan main ports for December shipments, traders said. European smelter sales to Japan have been limited in the past as they focused on local market needs. Italy exported only 49 mt to Japan over January-September this year, and Spain 2,362 mt, according to Japanese customs data. The smelters are eyeing Japan nevertheless due to falling car sales in Europe due to the eurozone...

VAG’s punchy little 1.4 Twincharged engine has found its way into many fine hot hatches over the last few years, and the latest incarnation of this platform is bound to be ripe for a bit of fettling. Gloucestershire based Forge Motorsport has created a beautifully engineered uprated wastegate actuator to be able to cope with higher boost levels on tuned and hard-driven examples. Each unit is entirely hand-fabricated by Forge’s time-served craftsmen here in the UK, and uses motorsport-quality materials and fabrication methods to create a unit which is both hugely effective and aesthetically pleasing at the same time. Usually, with this engine configuration, if the factory actuator fails, you need to purchase the entire combined turbo and actuator assembly. So, not only does the Forge part...

Studsvik of Sweden has signed a contract with the UK’s LLW Repository Ltd (LLWR) for the transport and dismantling of old heat exchangers from the Berkeley Magnox nuclear power plant. Under the £8 million ($12.8 million) contract - awarded by LLWR on behalf of Magnox Ltd - Studsvik will transport five redundant heat exchangers from the decommissioned Berkeley plant to Sweden, where Studsvik will dismantle them and recycle up to 90% of their metal content. The project is scheduled to take place in 2012, leaving a further ten redundant heat exchangers remaining at the Berkeley site. The heat exchangers, each weighing over 300 tonnes, will be transported by road and sea to Studsvik's facility near Nyköping, Sweden. The facility melts metal scrap, such as stainless steel, carbon steel,...

Most of base metals recovered at the non-ferrous metal market here today on moderate stockist buying amid better industrial offtake on the back of rebound in London Metal Exchange (LME). The industrial metal surged at the LME on weak dollar amid renewed buying by investors following Europe decision to take stronger steps to ease funding strains. Aluminium utensils scrap inched up by a rupee per kilo each to Rs 107.

Many real estate enterprises tend to choose color aluminum as the main material for doors and windows, while the old-fashioned aluminum alloy doors and windows market may gradually become a smaller market. During last century, many enterprises chose aluminum alloy profiles since consumers paid less attention on products quality while agencies were just caring about sales. Since aluminum alloy enables stable property and is difficult to be corroded,if treated with special finishing it can ensure at least 30 years fastness.Owing to low density, hardness and light weight,they were widely used in doors and windows, sunlight room and balcony encapsulation.Color aluminum doors and windows are also popular in international and domestic construction market with more than 86% market share.

From January to October, the non-ferrous metals industry production of Jiangxi province achieved sustainable growth. Jiangxi produced 302,000 tons aluminium products during the last ten months, which increased by 3.4% compared with last year.

Kubikenborg Aluminium (Kubal) of Sweden has placed an order with VHE for the supply of a stub straightening machine. Inward bending of anode stubs, generally known as “toe-in“, is a well understood occurrence in all pre-bake aluminium smelters. The difference in linear expansion of the carbon anode and the steel yoke or spider of the anode rod at high temperatures in the reduction cell means that the yoke expands more than the anode, bending the stubs which are anchored in the anode block. Stubs become bent inwards just above the iron thimble, changing the geometry of the yoke, and stubs can no longer be correcly located in the anode holes during subsequent rodding. Ultimately the stubs will no longer fit into the holes. The machine to be supplied to Kubal will be designed for the 2x2...

Construction of the Nanshan America Advanced Aluminum Technologies plant in Lafayette is expected to be competed by May, with production to start in July. The $100 million aluminum extrusion plant eventually will employ between 150 and 200 people, with 60 employees starting during the first year. The Nanshan Group, a global company based in China, held a meeting recently at Purdue University, in part to explain the project and discuss employment opportunities. "The plant will initially run with two state-of-the-art extrusion presses and has the capacity to incorporate another two presses after startup," project manager Jamie Beardsley said. "A state-of-the-art casting facility is also planned to start in early 2013. The revolutionary extrusion and casting process will give them an edge on...

According to China Customs China exported 63,825 tons of aluminum alloy ingots in October,which is an increase of 7.2% compared with September. Analysts agreed that the increasing demand from Japanese clients was the main reason that caused the growth in export. It is learned that China exported 42 thousand tons of aluminum alloy ingots to Japan in October which was a growth of 20% compared with September.Since enterprises in Japan were urgently in need of casting aluminum alloy that were used in auto parts and domestic appliances,this stimulated those enterprises to import aluminum alloy ingots from China. Japan is the main importer of Chinese aluminum alloy ingot. Analysts said that with the overall recovery of Japanese enterprises and enhanced production in the second half of...

Tribal people and non-government organisations in the district are apprehensive that the bauxite mining project will be cleared by the environment and forests without a proper study on the impact in Anantagiri and Araku mandals in the Agency areas of Visakhapatnam district.Tribal Cultural Research and Training Institute's former director VN Sastry and director general of Administrative Staff College of India SK Rao, part of a fourmember team set up by the Union ministry of environment and forests, was to visit the areas this month and submit a report on the implications of bauxite mining on tribals and other stakeholders, the visit has not materialised so far, fuelling speculation that it may not take place at all.The NGOs wonder if the twomember team would visit the areas at all as the...

Rio Tinto tried to tell investors how strong their aluminium business was on Monday but instead faced a barrage of questions about how quickly they could get rid of it. The aluminium division is expected to break-even in the second half of 2011 compared to a $US1.4 billion ($A1.43 billion) underlying earnings result in the first half. Rio Tinto chief financial officer Guy Elliott also signalled that the company would incur impairments on aluminium assets in its full-year financial results due to be published in February. The global resources giant last month revealed plans to sell many of its aluminium assets, including all of its Australian smelters and its troubled Gove bauxite mine in the Northern Territory. Analysts questioned the wisdom of Rio Tinto's actions in creating a second...

A JOBS boom bucking an industry trend has confirmed the Hunter as Australia’s premier manufacturing region. Figures show 53,000 people lost their jobs in the manufacturing sector throughout Australia in the 12 months to September 2011. In the same period, trend data showed 4000 Hunter workers gained employment in the manufacturing workforce, which is the second-largest employer in the region behind healthcare. In the Hunter, 11.1per cent of the workforce is employed in manufacturing compared with 8.9per cent across Australia and it has an unemployment rate (2.8per cent) that is almost half of the national average (5.3per cent). The Hunter Business Chamber – sourcing information from the Hunter Valley Research Foundation, Australian Bureau of Statistics and elsewhere – has outlined the...

Orbite Aluminae Inc. will announce the results of the preliminary economic assessment (PEA) prepared by Genivar Inc. for its planned metallurgical grade alumina plant, on Tuesday morning November 29, 2011. The Company will host a webcast conference call on Tuesday, November 29, 2011 at 10:30 AM EST where senior management will discuss the results of the PEA. Orbite owns 100% of the mining rights on approximately 6,400 hectares of a Grande-Vallee property, the site of an aluminous clay deposit located 23 km to the south of Grande-Vallee, and a 2 600 sq. m. full scale pilot plant in Cap Chat, in the Gaspe region. The NI 43-101 report issued in August 2011 has identified an Indicated Resource of about 1 billion tonnes of aluminous clay in part of the deposit. The Company also owns the...

UC RUSAL,the world's largest aluminium producer, is pleased to report on its senior management teams' recent official visit to the Republic of Sierra Leone, to explore new business development opportunities within the country. During the visit, the delegation discussed the possibility of the Company's participation in bauxite production, developing its transport infrastructure and the estimated raw material and energy potential of the country. In addition, it entered into a dialogue with the authorities of the Republic of Sierra Leone, responsible for developing the natural resources sector and attracting foreign investment in the country. RUSAL's delegation met with the President of the Republic of Sierra Leone, E. Koroma, and joined constructive meetings with the country's Vice...

A Canadian company has signed an agreement with Guyana to mine bauxite in a western region of the country. Prime Minister Samuel Hinds says the First Bauxite Corporation of Vancouver expects to mine more than 12 million tons (11 million metric tons) of refractory bauxite in unexplored deposits in the Essequibo region. CEO Hilbert Shields said the company hopes to build a plant within 18 months. He said initial production levels will stand at 100,000 tons (90,700 metric tons) a year. Hinds said refractory bauxite is in demand because it is used to manufacture products that can withstand intense heat for extended periods. The western Essequibo Region has an estimated 1.6 million tons (1.45 million metric tons) of bauxite.

The Nigerian Senate's committee on privatization has called for the sale of the government's stake in the Aluminum Smelter Company of Nigeria (ALSCON) to Russia's Rusal to be revoked, according to the committee's report published Wednesday. The report was the outcome of a wider investigation begun last September of the privatization of government-owned companies by the state privatization agency, the Bureau for Public Enterprises, from 1999 to date. "The National Council on Privatization should rescind the sale of ALSCON...and re-advertise [the smelter] for sale," the report said. The panel investigated the sale of the government's 77.5% stake in the 193,000 mt/year smelter, built at a cost of $3.2 billion but sold to Rusal for $250 million. The committee was told that Rusal only paid...

Expecting a three-fold increase in alumina exports to about 3 million tonne per annum (MTPA) in the next three years, state-run NALCO is set to revamp its port handling facility at Visakhapatnam. "We expect alumina exports to attain a peak of 2.7 MTPA by 2014-15 and will soon revamp the existing facility. For this, we have already invited expression of interest (EOI) from reputed global players by January 15, 2012, for replacement of ship loader," a National Aluminium Company (NALCO) official said. The existing alumina handling capacity at NALCO's Port facility at Visakhapatnam is 1 MTPA. The system including alumina ship loader was commissioned in 1987 and is inadequate to handle higher capacity vessels, the official said. "The existing system has been handling Handy max class of vessels...