
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

South Korea has bought a total of 3,000 tonnes of high-grade primary aluminium ingot registered on the London Metal Exchange (LME) via tenders closed on Tuesday, the state-run Public Procurement Service said on its website (www.g2b.go.kr). Details are as follows: TONNES SUPPLIER PREMIUM(CIF/T) 2,000 Metal Park Corp $176.8 1,000 Glencore International AG $182 Note: The above premiums were made over the London Metal Exchange prices on a cost, insurance and freight (CIF) basis.

The Competition Commission of India has approved the amalgamation of various Vedanta Group companies in India to consolidate the structure of the firm and also to eliminate cross holding. The amalgamation of Sterlite Industries India Ltd, Madras Aluminium Company, along with its subsidiaries into Sesa Goa Ltd, has got a green signal from the competition watchdog. The main products of the companies involved in the proposed combination are alumina, primary aluminium, flat-rolled aluminium products and commercial power generation. The competition watchdog said that the proposed combination is a measure of internal restructuring of the London-listed Vedanta Group companies, and that Vedanta Resources Plc would continue to hold the ultimate management control over activities of the companies...

Century Aluminum Company reported a net loss of $3.9M for Q1 2012. Financial results were impacted by a loss on forward contracts of $5M related to the mark to market of aluminum price protection options. Cost of sales for the quarter included a $6.4M charge for the restart of a curtailed potline at the Hawesville, Kentucky smelter. CEO Michael Bless said: "While the pace of end demand growth in key developing markets has slowed, absolute conditions remain reasonable. "Given the risk of shock from the Eurozone, coupled with tight financing markets, customers remain wary of making long-term commitments. The aluminum price has been trading at a level that, in our opinion, is not sustainable.” He said the price of electric power in developed and developing markets renders a significant...

The world’s leading figures in the aluminium industry will be in Abu Dhabi for what has been named as ‘Aluminium Week’. For the first time ever three of the industry’s most prestigious events will take place in Abu Dhabi over the next few days. Emirates Aluminium (EMAL) will play a central role in this global occasion as the major host. EMAL is the host of the Gulf Aluminium Council’s (GAC) Annual Dinner being held at Emirates Palace on 29 April. This is followed the next day by the Annual General Meeting of the International Aluminium Institute’s (IAI). On the same day, 30 April, the CRU’s 17th World Aluminium Conference begins. EMAL is the host sponsor of the four-day World Aluminium Conference and the conference’s signature dinner. EMAL President and CEO, Saeed Fadhel Al Mazrooei,...

Below are the three companies in the Aluminum industry with the lowest forward price to earnings (P/E) ratios. Forward P/E uses estimated earnings to compare relative value among companies in the same industry. Generally, the lower the forward P/E, the more undervalued a company is believed to be.Noranda Aluminum ranks lowest with a a forward P/E ratio of 6.96. Century Aluminum is next with a a forward P/E ratio of 9.08. Alumina ranks third lowest with a a forward P/E ratio of 9.73. Alcoa follows with a a forward P/E ratio of 9.96, and Kaiser Aluminum rounds out the bottom five with a a forward P/E ratio of 13.32. SmarTrend recommended that its subscribers protect gains by selling shares of Century Aluminum on March 5th, 2012 by issuing a Downtrend alert when the shares were trading at...

While US delivered mixed data, LME aluminum closed up USD 18/mt or 0.87% on Thursday as Fed’s decision to keep stimulus as a possible policy direction continued to provide support. Its gains were limited by a drop of 1,521 lots in trading volume to 8,227 lots, though. Investors would mostly stand on the sidelines on accounts of weakness in global markets and economies this last trading day before Labor Day. SMM expects LME aluminum to move between USD 2,075-2,100/mt during today trading while the most active SHFE aluminum contract hovers between RMB 16,130-16,195/mt. Spot discounts over the current-month SHFE aluminum price are expected to be maintained between negative RMB 10/mt to RMB 30/mt as downstream stocks replenishing interest is weak due to thin production orders and tight cash...

Century Aluminum posted a narrower-than-expected first-quarter loss, helped by an 11 percent increase in shipments. January-March net loss was $3.9 million, or 4 cents per share, compared with a profit of $25 million, or 25 cents per share, a year ago. Sales fell marginally to $326.2 million. Analysts had expected the Monterey, California-based company to post a loss of 22 cents per share on revenue of $317.1 million, according to Thomson Reuters I/B/E/S. Shipments of primary aluminum totaled 159,967 tonnes, compared with 144,178 tonnes a year ago. Shares of the company, valued at $713.4 million, closed at $8.11 on Tuesday on the Nasdaq.

According to the media report that casting aluminum alloy plate will replace previous material was widely used in several related industries in domestic. It is learned that casting aluminum alloy will be the main development new material in the next 5 years. The demand of casting aluminum alloy material will increase largely in the following 5 years, also will reaches to the gold development period. Some professional visitors believed aluminum alloy material is the key development new material for casting industry in China, will be widely used in automobile and aviation. With the rapid development of these industries, the development of casting aluminum alloy material has formed a virtuous industry chain gradually.

Aditya Birla Group’s aluminium maker Hindalco Industries Ltd said Wednesday it has raised Rs 3,000 crores by issuing bonds as it helps to cut down interest costs. The company, world's fifth largest can maker, issued non-convertible debentures or NCDs to institutional investors with an assurance to repay in 10 years along with an yearly coupon rate of 9.55%. HDFC Bank and Standard Chartered Bank were joint arrangers for the bond issue. Hindalco has been given an investment grade rating by rating agencies CRISIL and CARE. “With no existing supply of Hindalco paper this provides an opportunity for building exposure to long tenor paper at attractive yields and benefit on capital gains as interest rates ease over the next few quarters,” said Alphonso Richard Das, president – finance at...

US-based aluminum rolled products maker Novelis (NYSE: NVL) will invest US$400mn in Brazil to raise production capacity to meet the expected increase in domestic consumption to 4.5Mt/y by 2025, senior VP and president of Novelis South America, Marco Palmieri, said at the V international aluminum congress held in São Paulo. "The industry also needs to be alert to primary aluminum supply. Big industrial players can ensure it by increasing recycling in their plants. However, the small manufacturing industry may have trouble obtaining it," Palmieri said. To reach the projected growth, the sector will require substantial investments in the period - more than 63bn reais (US$33.9bn) - to expand the entire local aluminum transformation chain, both primary and recycled, according to national...

Noranda Aluminum Holding Co (NOR.N) said first-quarter profit fell, hurt by lower aluminum prices and a drop in sales. Persisting global macro-economic concerns, particularly the European sovereign-debt crisis and fears of slowing economic growth in China, have dampened aluminum prices, the Tennessee-based company said. A global supply glut has hurt prices and some analysts expect excess capacity in aluminum smelting to drag on for years to come. Net profit fell to $16.2 million, or 24 cents a share, from $38.3 million, or 56 cents a share, a year ago. Revenue fell 10 percent to $353.5 million. Noranda operates a mine in Jamaica to produce bauxite that is refined into alumina at its Gramercy, Louisiana facility. The alumina is then smelted into aluminum at Noranda's smelter near New...

As prices of dry-processed aluminum fluoride drop as much as RMB 800/mt starting from March, and plunges by nearly RMB 1,500/mt since December, producers are jointly suspending production in a bid to curb the downside run, an SMM survey shows. Several producers say they are already running at loss due to present low prices. Production has already halted at some producers in Henan, Anhui, Jiangxi and Shandong. A Jiangxi-producer with an annual capacity of 15,000 mt said it is consuming existing stocks while facilities are being maintained. When to resume production has yet to be determined by future demand and prices, according to the producer. Given relatively stable raw material prices, falling prices are mainly the result of over capacity, said a Shandong-based fluoride producer....

China’s aluminum consumption will grow at an annual rate of 10.5 percent to 27.5 million tons by 2015 amid continuous urbanization and investment in infrastructure and construction, said Rusal Marketing GmbH. Growth will slow from the 17.2 percent rate during 2005 and 2010, Chief Executive Officer Steve Hodgson said in a speech at a Metal Bulletin conference in Shanghai. China is unlikely to support Asian demand for primary aluminum and may reduce demand from the region with rising exports of semi-finished products, he said. Rusal will invest in a company in Shenzhen to act as its trading vehicle in China, Hodgson said. It agreed in November to buy a stake in an affiliate of China North Industries Corp., or Norinco. Aluminum on the London Metal Exchange has climbed 3.3 percent this year...

Researched by Industrial Info Resources (Sugar Land, Texas) -- Rio Tinto Alcan (Montreal, Quebec), the aluminum manufacturing branch of Rio Tinto plc RIO +2.80% , and Cahya Mata Sarawak Berhad (kl:CMSBU) (Sarawak, Malaysia) have mutually terminated their memorandum of understanding (MoU) to build a $2 billion dollar aluminum smelter in Malaysia's Sarawak state. The companies were unable to reach a commercially viable power purchase agreement for the smelter. Industrial Info Resources (IIR), with global headquarters in Sugar Land, Texas, and eight offices outside of North America, is the leading provider of global market intelligence specializing in the industrial process, heavy manufacturing and energy markets. Industrial Info's quality-assurance philosophy, the Living Forward Reporting...

Labour Minister, Derrick Kellier has referred the dispute between Noranda Bauxite Limited and the University and Allied Workers’ Union (UAWU) to the Industrial Disputes Tribunal for resolution. The referral follows a breakdown in conciliation talks which went on for hours at the labour ministry yesterday. The ministry said the parties were unable to reach an agreement in relation to an incentive pay scheme. The more than 200 workers represented by the UAWU, are reportedly upset at a decision by the management to make changes to the company’s incentive scheme. The UWAU said each year the company pays out a bonus to workers based on a certain set of targets. It said the funds which are set aside are usually distributed equally among the workers. But the union says the company has decided to...

China's March data for bauxite and nickel ore confirmed Chinese importers rushed to buy the two materials ahead of a possible export ban in key supplier Indonesia and imports in April may be even bigger. China is the world's leading consumer and producer of nickel and aluminium. Bauxite is used to produce alumina, the main material for primary aluminium production. "Imports in April would be a lot higher than March," said a trade manager at a nickel producer, which scheduled 8 shipments of laterite ores from Indonesia in April, doubling from March. The trade manager said 26 ships carrying nickel ores were scheduled to arrive China's northeastern port of Tianjin between late April and early May and that number of ships arriving in the short period was high, boosting port stocks in China....

Sterlite Industries is in talks with state-owned National Aluminium Company (Nalco) to source alumina for its Vedanta Aluminium plant. The flagship company of Vedanta Resources Plc is also looking at importing alumina in order to ramp up the capacity of its Lanjigarh plant in Orissa to 2 million tonne (mt). “Our first aim is to take the capacity to 1.2 mt this year and then, based on further approvals, we would like to ramp it up to 2 mt,” the company said in a conference call on Wednesday. He said since bauxite mining is banned in Lanjigarh by the Union environment ministry, the company has no backward integration and is therefore talking to Nalco and some exporters for sourcing alumina. Alumina is obtained from bauxite, which is further processed to make aluminium. Roughly, it takes 2...

LME aluminum closed down USD 7/mt or 0.34% at USD 2,073/mt on Wednesday as a surge of over 9,000 mt in aluminum stocks and the sharpest drop since 2009 in US durable goods orders in March overshadowed strong annual reports from the US and Fed’s decision to maintain low interest rates until late 2014. Cautiousness will stay in today’s markets and aluminum should continue to move within a narrow band. LME aluminum is expected to test resistance at the 20-day moving average and hove between USD 2,065-2,095/mt. The most active SHFE aluminum contract for July delivery should move between RMB 16,120-16,180/mt as it tests 10-day average support. Spot aluminum is expected to trade at discounts of RMB 30/mt to premiums of RMB 10/m over the current-month SHFE aluminum price as more traders...