
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

Rio Tinto hopes to seal the sale of four alumina plants in France and Germany by the end of September, the chief executive of its aluminium arm said, advancing its push to reduce its footprint in the highly competitive sector. Rio Tinto Alcan said at the end of March it had received a binding offer from private equity group HIG for its three specialty alumina plants in France and one in Germany and would respond to the offer after consulting unions. The head of the unit said on Tuesday the deal now looks set to be concluded in the next five months. "It is going very well and if all goes well we should finish the transaction some time in the third quarter," Jacynthe Cote said at an aluminium conference in Abu Dhabi. Rio Tinto unveiled plans last October to sell 13 assets only four years...

The Queensland Government says there's no guarantee a bauxite mine will be approved near Cape York following the overturn of the Wild Rivers legislation. ABC News reports QLD Natural Resources and Mines Minister Andrew Cripps said mining companies would still face strict regulations after Wild Rivers was changed. But he said bureaucracy would no longer be a major obstacle for mining companies. "I think the key difference between the way that these projects will be considered by the LNP and the way that they were considered under the former government is that politics won't be getting in the road," he said. Wilderness Society spokesperson Gavan McFadzean told ABC News the repeal of Wild Rivers was the realisation of the organisation's "worst fears". He said without the legislation the...

Price realizations played a key part in ensuring that Sterlite Industries (India) Ltd did well in the March quarter, compared with the December quarter. The metal firm’s sales rose by only 5% sequentially to Rs. 10,763 crore, but operating profit rose 16.1% to Rs. 2,705 crore and operating margin improved 238 basis points (bps). One basis point is one-hundredth of a percentage point. Its merger with Sesa Goa Ltd will be closely watched, especially as the merged entity will contain all of Vedanta Aluminium Ltd, the group’s new aluminium venture whose project has been delayed and is running up losses. In the quarter, Sterlite suffered a charge due to a litigation it lost, which was offset in part by foreign exchange-related gains. The net result was a 15.1% quarter-on-quarter (q-o-q)...

The spirit of innovation and continuous improvement at Dubai Aluminium (Dubal) — the world’s largest primary aluminum smelter using pre-bake anode technology — has again been recognized by an independent, peer-based jury: the company received two category awards in the 2012 Ideas.Arabia Idea of the Year competition. The award ceremony was integral to the 7th Ideas.Arabia International Conference, which took place in Dubai recently. The two awards accorded to DUBAL were: * 2012 Ideas.Arabia Health & Safety Award — This went to “Loading and unloading jig for anode butts,” submitted by J Iqbal, B Mohiuddin and M Wazir. To overcome the former unsafe practice of standing on anode rods while latching/unlatching anodes/butts in the Rodding Room, this suggestion entailed the construction of a...

Aluminium Bahrain B.S.C. (Alba)'s sponsorship of CRU Event's 17th World Aluminium Conference underlines the company's initiatives to engage in events that enrich knowledge-exchange in the aluminium industry as well as promote networking opportunities for industry leaders. Billed as 'an authoritative aluminium event for senior executives', the 17th World Aluminium Conference will be taking place at Fairmont Hotel, Abu Dhabi, United Arab Emirates from April 30 - May 2, 2012. Alba will also be hosting a welcome reception for all participating delegates on the opening day of the conference. An exhibition stand at the sidelines of CRU's 17th World Aluminium Conference will provide Alba with a platform to showcase its extensive range of high-quality aluminium products. Commenting on Alba's...

The decline in aluminum production in the Venezuelan industries located in Guayana (southern Venezuela) has obliged authorities to "adjust" aluminum supply quotas sold to multinational companies. Venezuelan aluminum smelter CVG Alcasa's failure to deliver the product is long-standing and it is due to the industry's operational decline. In the case of Venezuelan smelter Venalum, exports were reduced because of production has plummeted in recent weeks, and high levels of iron have been found in aluminum cylinders. A source of the industry said that in a scenario marked by heavy losses and operational problems, futures contracts are risky for state-run companies, which have already used their reserves and have committed production for several years. Henry Arias, a union leader of Venezuela s...

Emirates Aluminium (Emal) is in talks with two other metal processors interested in building facilities alongside its US$10.2 billion (Dh37.46bn) plant in Abu Dhabi. It comes as the aluminium project increases production to almost 800,000 tonnes in its first phase and prepares to add 1,000 jobs over the next year. "We are encouraging downstream industries to set up around Emal, and we have already committed with two companies and are in negotiations with another two," said Saeed Fadhel Al Mazrooei, the chief executive. The plant will also be able to supply molten aluminium to processors based around the site, reducing the cost of transporting the metal in solid ingots and billets that have to be remelted. Emal is on track to boost first-phase production capacity by almost 50,000 tonnes by...

Oleg Deripaska's Basic Element said it had agreed a $1 billion cooperation deal with China's state-owned North Industries Corporation, or Norinco, that will include construction of a rolling mill in Russia for metal production. The deal will also allow the world's largest aluminum producer RusAl, which is majority owned by Basic Element's subsidiary En+ Group, to expand its aluminum exports to China by selling to North United Aluminum, a joint venture between RusAl and Norinco, Basic Element said in a statement on Saturday. RusAl will also consider an option to buy Norinco-made anode production equipment for its Taishet aluminum smelter that is under construction in eastern Siberia, the statement said. The announcement coincides with a visit to Russia by Chinese Vice Premier Li Keqiang,...

Yunnan Aluminum published the Q1 report also revealed the four major projects go well so far. The 800 thousand tons alumina project of Wenshan Aluminum Company invested 4,835,720 thousan yuan totally, now the project was in smooth condition. The two mating mine systems Hong Sheke and Mai Jiuping mines have already put into production, each system has finished monomer test run and test run with water, now the whole factory was in the process of linkage test run with material. The other three down stream aluminum processing projects were planned to invest 9,171,220 thousand yuan totally, the first quarter in this year has invested 70942.4 thousan yuan. The 300 thousand tons of aluminum plate/strip project of Yongxin Aluminum Company has finished the construction of major structure and...

Kaiser Aluminum Corp. (NASDAQ: KALU) was upgraded by investment analysts at Dahlman Rose from a “hold” rating to a “buy” rating in a note issued to investors on Monday. The firm currently has a $70.00 target price on the stock. The analysts wrote, “Though LME aluminum ingot prices remain depressed, Kaiser has steadily increased profitability by passing through metal costs and focusing on increasing value added revenue per pound. Achieving such increases is possible due to Kaiser’s position in key products and end-markets (such as plate for aerospace and automotive) that have seen firm demand in spite of depressed LME prices.” Kaiser Aluminum Corp. traded up 0.81% on Monday, hitting $52.57. Kaiser Aluminum Corp. has a 52-week low of $40.12 and a 52-week high of $57.29. The company has a...

The American Architectural Manufacturers Association (AAMA) of Schaumburg, Ill., has published AAMA CW-10-12, "Care and Handling of Architectural Aluminum from Shop to Site." The document was updated from the 2004 version and covers care and handling of architectural aluminum products from mill to fabricator to job site through project completion. "Fabricated aluminum used in architectural applications is highly susceptible to damage from improper handling, storage, physical contact with other objects and contamination," says Steve Wilkening, chair of the AAMA CW-10-04 Review and Update Task Group. "CW-10-12 provides recommendations for proper care and handling to ensure that aluminum products go through the entire manufacturing, finishing, fabrication, delivery and installation phases...

Reuters reported that Aluminum Corporation of China Limited net loss of CNY 1.09 billion for the Q1 dented by higher costs and lower prices for the lightweight metal. Chalco, the country's top aluminium maker also warned of a loss for its first half ending June 2012 due to weak prices and high raw material prices. It reported 19% rise in revenue to CNY 33.6 billion in the 3 months ended March but the net loss was worse than analysts had expected with UBS forecasting a loss of CNY 750 million. Last year the company made a net profit in the same period of CNY 331.17 million. The state owned aluminium maker had warned of losses in the Q1 and analysts forecast aluminium prices to be flat while China's aluminium market would move into surplus this year with more new low cost capacity coming on...

Norway-based aluminium producer Norsk Hydro reined in its expectations for market growth this year due to weak demand from Europe, as it posted a bigger-than-expected drop in quarterly profit due to a glut in supply that is hitting prices. The company said on Friday it expected global demand for aluminium outside China to grow about 3 percent in 2012, compared with its forecast three months ago of 3-5 percent growth. It announced no new plant closures or production cuts. While Hydro and other western aluminium producers have reduced capacity to try to hold up prices, Chinese smelters have continued to flood the market. Hydro said first-quarter underlying net profit fell by more than half from the prior year period to 256 million crowns ($44.7 million), well short of analysts' mean...

Pin toe-in is an understood and accepted phenomenon in all pre-bake aluminium smelters and VHE has been working to solve the problem. Toe-in is caused by the difference in expansion rates of the steel yoke or spider and the carbon anode as they heat up in the reduction cell. The yoke expands more than the anode, bending the pins which are already sealed in the anode block. The pins bend inwards just above the iron thimble, and can no longer be correctly located in the anode holes. After some further time the pins will no longer fit into the holes. It used to be that smelters would continue to use rods until the pins would no longer fit into the anode. The bent pins would then be cut off and new ones welded onto the yoke. Today, it is generally accepted a pin straightener has a cost...

The week’s biggest mover on the Aluminum MMI® was Indian primary aluminum cash prices, which saw a two percent increase to INR 107.25 ($2.04) per kilogram. This comes on the heels of a 1.1 percent decline the week before. The 3-month price of primary aluminum rose 0.6 percent on the LME to $2,080 per metric ton after falling 1.9 percent during the week prior. The cash price of primary aluminum rose 0.6 percent on the LME to $2,040 per metric ton after falling two percent the previous week. Chinese aluminum prices were mixed for the week. Last week, Chinese primary aluminum cash prices increased by a slight 0.5 percent on the SHFE to CNY 16,080 ($2,550) per metric ton. Chinese aluminum billet prices ticked up 0.3 percent over the past week to CNY 16,100 ($2,553) per metric ton. Closing at...

Russian tycoon Oleg Deripaska's Basic Element said on Sunday it had agreed a $1 billion cooperation deal with China's state-owned North Industries Corporation (Norinco) that will include construction of a rolling mill in Russia for metal production. The deal will also allow the world's largest aluminium producer Rusal (0486.HK), which is majority owned by Basic Element's subsidiary En+Group, to expand its aluminium exports to China by selling to North United Aluminium, a joint venture between Rusal and Norinco, Basic Element said in a statement. Rusal will also consider an option to buy Norinco-made anode production equipment for its Taishet aluminium smelter which is under construction in East Siberia, the statement said. The announcement coincides with a visit to Russia by Chinese Vice...

Australian Bauxite Limited (ASX:ABZ) quarterly activities statement is dated 27th April 2012 and is for the three months ending 31st March 2012. PRINCIPAL POINTS Corporate - Mr Ken Boundy was appointed alternate director for Mr Vincent Tan - Cash in hand at the end of the March 2012 quarter was $ 2.5 million - Pre-feasibility study nearing completion Exploration - Discovery of the company's thickest highgrade bauxite intersection - possibly one of the thickest bauxite intersections in Australia. Most Australian bauxite deposits are less than 4 metres thick(5) - 33 metre thick high grade bauxite discovered at Taralga6 March Quarter Exploration Summary - During the March quarter exploration focused on completing the Goulburn Bauxite Pre-feasibility study - Drilling continued at Binjour in...

Anglo Aluminum Corp. (TSXV:ALU) says it plans to spin off its Mamou-Dalaba bauxite permits into a new publicly listed company to be called Africa Bauxite Corp. The four permits that make up the Mamou-Dalaba project cover about 1,800 square kilometres in southwest Guinea. Anglo Aluminum said the proposed spin-off will allow it to focus on the Koba-Koumbia bauxite project in northwestern Guinea in western Africa. The proposed transaction requires approvals from Anglo Aluminum's shareholders and the Supreme Court of British Columbia. The stock listing would require an approval from the TSX Venture Exchange.