South Asia’s beverage-can manufacturing capacity continues to expand, with Bangladesh preparing to enter the industry through a USD 100 million aluminium beverage can plant while new and expanded facilities advance across India, Pakistan and Afghanistan. However, the planned Bangladeshi project still faces a key infrastructure hurdle: securing a gas connection before production begins. Chinese-owned Alu Hi-Tech Industries Ltd is developing Bangladesh’s first aluminium beverage can plant at Kaliakoir Hi-Tech Park in Gazipur, north of Dhaka. The facility is designed to produce around 1 billion cans annually, with approximately 90 per cent of its output earmarked for export markets. The company registered with the hi-tech park in 2024, when work on the project began. Construction has...
Europe’s recycled aluminium industry is an important component of the global secondary aluminium supply chain, with Germany, Italy and the United Kingdom (UK) representing key national markets. Production across the European region stood at nearly 6 million tonnes in 2023, supported by established scrap recovery systems, industrial recycling capacity and demand for recycled metal. Russia also contributes to the regional landscape through secondary aluminium production units concentrated in several industrial centres. According to AL Circle’s analysis in its report, “ World Recycled ALuminium Market Analysis Industry Forecast ”, the four countries present different market structures, from Germany’s substantial recycling capacity and Italy’s scrap-based production to the UK’s organised...
Grow with
AL Circle
In the red-dust heartland of Lanjigarh, India, where bauxite is transformed into smelter-grade alumina, Vedanta Aluminium is quietly scripting a different kind of transformation, and this time, not in the refinery, but in how industry reimagines waste. At the Lanjigarh plant, a spirited scrap art sculpture competition recently unfolded. Image source: Youtube (Krishna Tech & Electri) Hosted by Vedanta Lanjigarh, a critical cog in Vedanta Aluminium’s downstream value chain, a competition invited employees and business partners to team up and repurpose industrial scrap into striking works of art. Not a mere display of aesthetic flair, each sculpture, curated and created under the leadership of departmental heads, became a living testament to the plant’s ethos that sustainability isn’t a...
Whittley Marine Group, a leading Australian trailer boat manufacturer and retailer, has broadened its lineup with the launch of the new Whittley AL Series, a range of aluminium boats that are now available at all five Whittley Boating Centre locations nationwide. The AL Series features six compact aluminium boat, motor, and trailer (BMT) packages, each under 5.5 metres in length. Designed to offer budget-friendly, ready-to-launch options for Australian boating enthusiasts, the series includes a variety of popular styles such as bow riders, side consoles, centre consoles, runabouts, and open tiller steer models. Whittley Marine Group’s General Manager, Brock Cohen, stated that the introduction of aluminium models supports the company’s strategic vision of delivering a comprehensive trailer...
Uno Minda, a leading automotive components and systems manufacturing company, is setting up an aluminium die-casting plant in Sambhaji Nagar, Maharashtra, after the board approved an INR 210 crore (USD 25.15 million) investment. The firm added 2.23 per cent post-approval to set up the greenfield manufacturing facility. This expansion aims to meet the rapidly growing demand for casting components pivoted in electric EVs (two- and four-wheelers). Image source: craftsmanautomation.com With the hastened movement towards electric vehicles, the demand for lightweight and high-performing vehicle platforms is where aluminium die casting is becoming critical. Advanced die-casting capabilities are required within the EV's aluminium-based structure and thermal capabilities, especially for the EV...
Vedanta Aluminium, India’s largest aluminium producer, has announced the expansion of wire rod production capacity at its subsidiary, Bharat Aluminium Company (BALCO), as part of its broader growth strategy to scale overall aluminium production to 1 million tonnes per annum (MTPA). This move comes amid surging domestic demand driven by the rapid development of India’s digital infrastructure and industrial growth. With India accelerating its 5G rollout, rural broadband expansion, smart city projects, and cloud infrastructure, aluminium is gaining prominence as the material of choice. Its high conductivity, corrosion resistance, lightweight and strength make it ideal for modern infrastructure needs. BALCO’s BIS-certified aluminium wire rods are playing a pivotal role in supporting this...
Hindalco industries' wholly owned subsidiary, A.V. Minerals (Netherlands) N.V., has acquired 100 per cent equity in Aditya Holdings LLC, a newly incorporated entity, through a capital subscription worth USD 100. The acquisition, completed on June 19, 2025, was formalised through the execution of an operating agreement between the two entities, with Aditya Holdings LLC now operating as a step-down wholly owned subsidiary of Hindalco. Image for representational purposes only Aditya Holdings LLC, incorporated just weeks earlier on June 3, 2025, is positioned within the metals sector and is set to engage in manufacturing, processing and trading of metal products, alloys, and by-products — spanning aluminium, copper, and both metallurgical and non-metallurgical alumina. According to Hindalco’s...
On Thursday, the aluminium extrusion industry called on the government to implement protective measures to support underutilised domestic units from potential overdumping by FTA countries. The industry is struggling to remain viable due to free trade agreements with several Far East countries, which permit duty-free imports and threaten the survival of nearly 500 Indian manufacturers. The Aluminium Extrusion Manufacturers Association of India (ALEMAI) also urged its members and the broader industry to adopt quality standards and ensure compliance, stressing the need to counter the rising influx of low-cost, substandard imports. "The total installed production capacity in India is 3.5 million tonnes per annum. However, the aluminium extrusion industry can utilise only around 2 million...
China’s wrought and unwrought aluminium imports in May 2025 displayed a reverse pattern compared to April. In May, imports rose year-on-year but declined month-on-month, while April had shown the opposite — higher imports than the previous month but lower than the same period in 2024. According to the General Administration of Customs, China’s wrought and unwrought aluminium imports in May 2025 were 350,000 tonnes, up by 14.7 per cent in May and down by 5.4 per cent from 370,000 tonnes. In contrast, the import volume in April , standing at 350,000 tonnes, was up by 2.94 per cent M-o-M from 340,000 tonnes but down by 7.89 per cent from 380,000 tonnes. In the first five months of 2025, China’s wrought and unwrought aluminium imports totalled 1.67 million tonnes, down by 12.08 per cent from...
Anil Agarwal, the Chairman of Indian mining conglomerate Vedanta Limited, has divulged the intention to position itself as a global leader in the transition metals, energy, technology and critical minerals, dubbed "Vedanta 2.0" for the next growth phase. The firm has also announced its FY25 recorded revenue and EBITDA, future growth plans and demerger progress. Image source: linkedin.com While addressing the stakeholders about the group's annual report, Mr Agarwal highlighted its position at a pivotal inflexion point, backed by a record financial performance, robust cost leadership and the near-completion of its value-unlocking demerger exercise. He further emphasised the importance of the group's organisational realignment, greater focus on vertical integration and its expanding role in...
One year since its BRL 1.3 billion (USD 234 million) investment to phase out fuel oil and switch entirely to natural gas, Hydro’s Alunorte refinery in Pará, Brazil, has managed to cut a staggering 700 thousand tonnes of carbon dioxide annually. The figure is not only a testament to the scale of the project but also a signal to the rest of the global alumina industry that real decarbonisation milestones are achievable — if backed by strategic foresight, capital intensity, and infrastructure reform. Image for representational purposes only The fuel switch at Alunorte involved converting six steam-generation units and seven calciners to operate fully on natural gas. To make this feasible in a relatively underdeveloped energy corridor, Hydro partnered with New Fortress Energy, which...
Major Indian aluminium companies have faced a sharp decline in their share prices on June 19, with the Nifty Metal index falling below 0.5 per cent. Today, Hindalco Industries' share fell by 0.76 per cent at the closing, and NALCO’s by 2.87 per cent. Current geopolitical tensions, strong US dollars, and profit-taking are the significant causes of the decline in stock prices. Hindalco share price analysis On June 19, Hindalco Industries' closing price was recorded at INR 639.50 (USD 7.66) after opening the market at INR 643 (USD 7.70) reaching the highest price at INR 644.70 (USD 7.72). The previous day, the market opened at INR 643.85 (USD 7.71) and closed at INR 644.40 (USD 7.71), with the highest price reaching INR 646.85 (USD 7.75). A difference of 0.34 per cent is seen between today’s...
The European Union’s hallmark policy in the view of equitable trade and environment protection—the Carbon Border Adjustment Mechanism (CBAM)—seems fair on the surface, as long as its framework remains focused on preventing carbon leakage and blocking the influx of cheap, high-emission goods into the domestic market. Under CBAM, a carbon price is levied on imported goods, aligned with the carbon costs EU producers incur under the Emission Trading System (ETS). That sounds like a just deal for domestic producers, ensuring a level playing field. But what about EU-headquartered companies that relocated their operations abroad to escape carbon taxes? Here's where the issue arises as these companies will be required to purchase certificates that reflect the carbon emissions embedded in their...
SPIROL has expanded its range of aluminium press-in inserts by introducing new options made from 2024 aluminium. These additions, available in symmetrical (INS 50) and headed (INS 51) versions, complement the company's existing line of brass inserts. Image Source: SPIROL Threaded inserts are critical in strengthening plastic components and providing durable, reusable threads in bolted assemblies. They help maintain consistent seating torque and prevent plastic creep over time, which can otherwise undermine assembly integrity. Engineered for optimal performance and cost-efficiency, SPIROL's inserts come in various styles to suit different installation methods and application demands. The INS 50 and INS 51 series are designed for cold press-in installation, eliminating the need for heat and...
Early deals of Atlas Metals Group (AMG) plc reached 90 per cent after it announced Universal Pozzolanic Silica Alumina (UPSA) Ltd’s acquisition. The act is deemed to be a reverse takeover. The acquisition will be via an all-share offer, for which no figure has yet been disclosed. The proposal to undergo the reverse takeover has led to AMG's doubled share price, making it the best performer on the London Stock Exchange. On June 17, the AGM signed the non-binding letter of intent highlighting the intention for UPSA's reverse takeover. However, AMG has not yet provided any assurance of when or whether the reverse takeover will occur and continues to look for other potential acquisition opportunities. UPSA holds its right to pozzolanic silica alumina (PSA) in Australia, where they have...
According to the regional prosecutor's office, two workers were injured and hospitalised following a wall collapse at a bauxite mine operated by a subsidiary of Russian metals producer Rusal (RUAL.MM) in the Urals. The incident took place at a depth of 1,172 metres (3,845 feet) within the Cheremukhovskaya-Glubokaya mine, owned by Rusal’s subsidiary SUBR. The mine is recognised as the second deepest in Russia and ranks among the deepest globally. Authorities have initiated a safety compliance inspection at the facility in response to the incident. SUBR confirmed that the collapse occurred when the wall of one of the mine workings gave way and added that the miners were promptly brought to the surface. “The scene of the incident is being examined. Work at other mine levels is proceeding as...
In a bold step to boost the recycling of post-consumer aerosols (PCR), a three-month pilot project was kicked off on 2 June across Solihull in the West Midlands, England. Designed to uncover how aerosols are handled in household waste, the initiative will analyse kerbside collection data to paint a clearer picture of recycling habits. Spearheaded by Alupro through the UK Aerosol Recycling Initiative (UKARI) and delivered in partnership with SUEZ Recycling and Recovery UK, the project involves a deep dive into fully comingled waste streams. The analysis will be carried out by Sherbourne Recycling, home to one of the most advanced materials recovery facilities in the world. The key focus will be tracking how many aerosol containers are captured, sorted, and recycled, laying the groundwork...
With the United States slapping a steep 50 per cent tariff on Canadian steel and aluminium imports, Ottawa is now fast-tracking a self-sufficient economic response potent to reshape North America’s metals supply chain. At the centre of this pivot is a proposed ‘Buy Canadian’ policy, an industrial safeguard designed to protect Canadian producers and preserve jobs by mandating the use of domestic metal in government procurement contracts. Image for representational purposes only (Source: https://policyoptions.irpp.org/) Industry Minister Mélanie Joly confirmed this week that the government is actively considering procurement requirements for both infrastructure and defence projects that would prioritise Canadian-made metals. “These decisions are being taken as we speak,” Joly said,...
A new governing board has been inaugurated for the Ghana Integrated Aluminium Development Corporation (GIADEC), marking a renewed commitment to advancing the country’s bauxite and aluminium industry. The 11-member board, chaired by Kweku Sarfo-Buabeng, was officially sworn in by Lands and Natural Resources Minister Emmanuel Armah-Kofi Buah. The Minister hailed the inauguration as a significant milestone in Ghana’s pursuit of long-envisioned industrialisation goals. He urged the board to prioritise value addition by moving beyond the export of raw bauxite and focusing on local refining and aluminium production. The Minister also called on members to end unsustainable bauxite haulage practices and ensure their strategies align with Ghana’s green transition objectives. Speaking at the...
Germany's renowned premium light alloy wheels manufacturer BOREBT, its wholly owned subsidiary DYMAG Technologies Ltd. and Advanced International MultiTech (AIM), a Taiwanese composite materials expert, have come together for the development of an advanced carbon wheel technology. Image source: borbet.de The collaboration focuses on enabling seamless integration of the OEM operations with carbon-hybrid wheels. DYMAG's patented BX-F design for this initiative is set to create new milestones in providing lightweight, high-performing wheel solutions. This shall meet the evolving demands in the automobile sector with a hike in efficiency, safety and performance, making it OEM-ready innovation. With the collaboration at focus, these firms aim to accelerate the development and industrialisation...
