
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

KOLKATA: National Aluminium Company Limited (Nalco), a navratna PSU under the union ministry of mines, has bagged Dun & Bradstreet's Best PSU Award - 2012 in Non-Ferrous Metal Category. B L Bagra, Nalco's chairman and managing director received the award from Dr. M. Veerappa Moily, union minister of corporate affairs last week at New Delhi. Dun & Bradstreet has instituted this award to honour and recognize the country's leading central public sector enterprises (CPSEs) and acknowledge their progress and performance. Nalco, one of the largest domestic producers of aluminium, has been facing a slide in base metal prices due to a slowdown in demand, globally. In its home state of Odisha recently, Nalco advised local ancillary industries to take advantage of the Nalco metal as it will benefit...

Aluminium Bahrain (Alba) has announced new changes to the company’s management structure and appointed Basem Al Sharqi as the chief support functions officer (CSFO), reiterating its commitment to strengthening the organisational performance. Both changes will take effect as of June 3, a statement from Alba said. The structural changes at the executive management include the appointment of former chief supply chain officer, Isa Al Ansari, as the new chief operations officer (COO). Former chief financial officer Tim Murray has been given additional responsibilities and appointed as the new chief finance and supply officer (CFSO). Bahraini national Basem Al Sharqi has been newly inducted into the executive management team and will be the new chief support functions officer. They will report...

Noranda Aluminum shares are trading on heavy volume today, having fallen 14.3% to $6.59. About 1.8 million shares have been traded today, as compared to the 30-day average volume of 335,000 shares. Spikes in volume can validate a breakout or signify a potential turning point. SmarTrend recommended that its subscribers protect gains by selling shares of Noranda Aluminum on March 8th, 2012 by issuing a Downtrend alert when the shares were trading at $10.98. Since that call, shares of Noranda Aluminum have fallen 30.0%. We are now looking for when a new Uptrend will commence and will alert SmarTrend subscribers in real time. Noranda Aluminum share prices have moved between a 52-week high of $15.50 and the current low of $6.29 and are currently at $6.77 per share. The 200-day and 50-day...

The week’s biggest mover on the Aluminum MMI® was the LME aluminum 3-month price, which saw a 0.9 percent decline to $1,996 per metric ton. Last week marked the fourth in a row of declining prices for the metal.The aluminum cash price fell 0.9 percent on the LME over the past week to $1,957 per metric ton. This was the third week in a row of declining cash prices. Also closing out the third week of rising prices, Indian aluminum cash price increased by 0.5 percent. Chinese aluminum prices were flat for the week. The Chinese aluminum cash price closed at above $2,500 per metric ton after a flat week. Following a steady week, prices for Chinese aluminum bar closed flat at above $2,200 per metric ton. At above $2,500 per metric ton, the price of Chinese aluminum billet did not change since...

Manufacturing contraction showed in major economies and the United States’ May non-agricultural employments grew less than expected, with the unemployment rate rebounding, increasing risk aversion and leading to widespread sell-off of commodities and buying of haven gold. LME aluminum prices dropped together with other base metals prices. Strong short selling led to a large increase in total positions by 5,187 lots to 726,748 lots. The light metal eventually lost USD 22/mt or 1.1% settling at the intraday low USD 1,972/mt, which is also a 2012 low. Latest LME aluminum inventories dropped 1,725 mt to 4.9172 million mt. Weak European and US data will weigh on domestic financial markets. Aluminum will maintain the downward pattern. LME is closed for today and tomorrow, leading to a lack of...

Aluminium Corporation of China Ltd, known as Chalco, said on May 31 that it will lower its aluminium oxide production by 1.7 million tons this year due to Indonesian export restrictions on the raw material bauxite. The reduction represents 15.44 percent of China's production of aluminium oxide, the major material in aluminium production. Indonesia said in early May that exporters of minerals will face duties of about 20 percent. The exports of 14 minerals, including bauxite, are expected to be fully prohibited by 2014. In addition to Chalco -- China's biggest aluminium producer -- five other aluminium oxide producers called for a joint move on May 31 to reduce the production of aluminium oxide by 10 percent starting in June to stabilize the market. China's bauxite imports stood at 5.29...

This week spells the end for Rio Tinto Alcan’s Lynemouth smelter as the main part of the plant closes its doors for the final time today. About 290 workers were due to finish their last shifts this week, and many others have already left to take up other jobs or to use up holidays owed to them. The aluminium smelter, opened 40 years ago at a cost of £54m, was given a £28m government grant back then to help it tackle unemployment in a part of Northumberland struggling to recover from a series of pit closures. Now all that has come to an end as 515 jobs are being axed at the plant – a move some fear could have a catastrophic knock-on effect and lead to a further 2,500 jobs in the smelter’s immediate supply chain being lost too. The closure was announced by Rio Tinto Alcan last year after it...

Australian Bauxite has been granted a trading halt by the ASX pending details of a proposed capital rising, with the company's shares placed in pre-open. Australian Bauxite has not yet indicated where the potential inflow of funds will be allocated, but the company recently expanded Pre-Feasibility Studies at the Goulburn Bauxite Project due to thick bauxite discovered earlier in the year. Importantly - over half of the 38 million tonne resource has been identified as high grade. Pre Feasibility Study Metallurgical Tests confirmed that the remaining 47% of total identified bauxite resources, called PDM-DSO bauxite, contains dense, hard, magnetic emery nodules that are easily recovered by gravity screening for sale, leaving the remaining 70% light fraction as DSO grade bauxite. The halt...

Bauxite company Alufer has raised US$12 million in a private placing to complete its feasibility project at its flagship Bel Air project in Guinea and meet its cash requirements until next year. The firm postponed its planned listing on London's AIM market because of the poor market conditions, but this fundraising allows it to remain on schedule for first production in late 2013, or early 2014. Its chief executive Danny Keating told Proactive Investors that the firm carried out an extensive a road show across Europe, meeting with 60 different groups, but described the current fundraising market environment as "very tough". People liked the fundamentals of the bauxite space and the project, he said, but problems had arisen surrounding the project’s valuation. The US$12 million raised...

The ex-factory price of alumina from Aluminium Corporation of China Limited (CHALCO),China's largest producer of the metal, rose to 2,900 yuan ($455.33) per ton Friday, up 3.6 percent compared with the previous day. The company claims that its bauxite supplies have been affected by Indonesian policies, which are behind the recent price spike. Since May, Indonesia has been raising export tariffs on mineral products, including bauxite, a key component for alumina. In response, CHALCO will likely cut alumina output by 15 percent this year compared with 2011. Five of China's largest alumina makers, including CHALCO, have proposed an initiative for the whole industry to cut output by 10 percent to stale the market.

The Rayagada district administration on Saturday imposed prohibitory orders under section 144 of the CrPc at the Utkal Alumina International Ltd (UAIL) plant site at Doraguda in Kasipur block after irate labourers attacked police and set ablaze a police vehicle. The workers were up in arms against company officials after a labourer died in an accident on the company premises. The deceased was identified as Basist Narayan (42), a resident of Bihar. According to sources, at least four labourers were injured when a huge steel plate fell on them inside the plant on Friday night. While they were admitted to Tikiri hospital for treatment, Narayan was referred to the district headquarters hospital as his condition deteriorated. However, he succumbed to his injuries on his way to Rayagada...

After investing Rs 6,000-7,000 crore for its Aditya Alumina and Aluminium project in Orissa, a greenfield integrated aluminium complex, Aditya Birla group flagship Hindalco Industries is planning to raise around Rs 7,000 crore for the same project within the next couple of months. “We plan to raise that amount, but are yet to decide the funding route. We are awaiting RBI’s decision on interest rate cuts and will decide accordingly. If interest rates come down, we may go for bank borrowings, or else, we will raise the required resources through bonds,” a senior official close to the development told Financial Chronicle without wanting to be named in this report. The project includes 4.2 million-tonnes per annum bauxite mine, 1.5 million-tonnes per annum alumina refinery at Kansariguda and...

SAFTI FIRST, leading USA-manufacturer of fire rated glazing and framing systems, is pleased to announce the addition of SAFTIfire Framing AL20 to its growing product line. SAFTIfire Framing AL20 by SAFTI FIRST is a 20-minute, full-vision, stile and rail aluminum door that incorporates SuperLite I clear specialty tempered glazing. SuperLite I with PPG Starphire® Ultra-Clear and SuperLite I pattern glass are also available glazing options. Fully listed and labeled by Intertek-Warnock Hersey, this product meets NFPA 252, UL 10C for positive pressure and CPSC Cat. II impact safety. “We’re excited to offer the only fire rated aluminum door designed specifically for the U.S. 20-minute market,” says Jeff Griffiths, Director of Business Development for SAFTI FIRST. “The profiles easily...

Alcoa (NYSE:AA) operations in Morristown, Tennessee, has been recognized by ASQ, the global voice of quality, as a bronze award winner among a field of 32 finalists in competition at the World Conference on Quality and Improvement held recently in Anaheim, Calif. Alcoa Howmet, Morristown is the first Alcoa business selected by ASQ among its award winners in the highly regarded international quality competition. In addition, Morristown was selected by its peer finalists as the Attendee Choice Award recipient in the organizational impact category. ASQ awarded one gold and six bronze awards. No companies were awarded silver status. “The bronze award validated our business transformation strategy against other world-class companies. The judges put the stamp of approval on the effectiveness of...

It looked like a textbook win-win deal when Australian high-speed ferry designer AMD Marine Consulting formed a joint venture in 1993 with the engineering arm of a state-owned Chinese shipbuilder. The joint venture partner, Guangzhou Marine Engineering Corporation, a subsidiary of the giant China State Shipbuilding Corporation, gained access to state-of-the-art technology in wave-piercing, aluminium-hull designs. For AMD, a Sydney-based private company, the payoff was a foothold in China's maritime market during a period of rapid growth. The joint venture, Seabus International Co, began designing high-speed aluminium catamaran ferries and sea rescue vessels for China's inland and coastal waters, according to the company's website. That's when a third winner emerged. Attracted to the...

Nihon Superior, a producer and distributor of metal jointing materials for electronics applications, will exhibit its new soldering products at the JISSO PROTEC 2012 exposition, which will be held in Tokyo, Japan from June 13 to 15. SN100C P810 D4, a lead-free solder paste, and solder-coated aluminum ribbon are the new products that will be introduced at the event. These products are designed using SN100C, a lead-free and silver-free solder material, which delivers increased reliability and high productivity. The SN100C P810 D4 material is used to decrease the voids in large-area solder joints that are found between power semiconductors and substrates. The aluminum ribbon is ideal for application in solar cells, which can leverage the benefit of aluminum’s lower density and lower cost...

Within the next six months, city folk will see new solar-powered recycling bins in the city. Known as the 3R Box, the bins will also act as an advertising tool to promote recycling. It will be placed in public places such as busy walkways. This is to encourage the public to help reduce, reuse and recycle. The pilot project in the city was launched by mayor Datuk Mohamad Roslan Sakiman at the Petaling Jaya City Council. Also present was Selangor executive council member Elizabeth Wong. The public can throw recyclable items such as paper, aluminium cans, batteries and plastic bottles into the box which has four compartments for the items. The cost of producing and maintaining the recycling box will be borne by a private company called Tyewei Marketing Sdn Bhd. However, the items collected...

Showa Denko K.K. (SDK) and its affiliated companies, headquartered in Tokyo, have announced that they have collected for recycling about 6 million used beverage cans (UBCs) in 2011. Showa Denko is a manufacturer and marketer of chemical products servicing a range of industries, including the aluminum industry. Showa Aluminum Can Corp., a consolidated subsidiary of SDK, started aluminum can recycling activities in 1972. The activities spread across the Showa Denko Group in 2001.The collected aluminum cans are used by Showa Aluminum Can Corp. to produce new aluminum beverage cans. The group adds that it donates money generated through its recycling program to regional welfare organizations, charities and volunteer groups that aid people with special needs. In addition to the recycling of...