
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

Alexandria Industries today announced it has acquired MidAmerica Extrusions of Indianapolis, a manufacturer of aluminum extrusions for a variety of applications and industries. The support staff and production team members of MidAmerica Extrusions will join Alexandria Industries, a high-quality, short lead-time producer of engineered products, and remain at the MidAmerica facility in Indianapolis. MidAmerica Extrusions—now called Alexandria Extrusion MidAmerica—specializes in custom design engineering services and precision aluminum extrusions up to 12 inches in diameter. For nearly 50 years, the company has produced aluminum extrusions for applications that include commercial and military transports, signage, stadium seating, material handling, playground equipment and architectural...

TEKO has extended its TEKAL series of extruded aluminium enclosures with a range of new models which can be easily mounted to a wall, control panel, machine housing or bulkhead. The new TEKAL-E wall mount enclosures feature special end panels with integrated mounting flanges. These are designed to allow the unit to be mounted without the need to open the enclosure or disturb the electronics. The enclosures consist of an extruded case section and two tough flanged ABS end panels which are mounted by self-tapping screws. The case extrusion is painted with fine texture powder paint in either off-white RAL 9002 or black RAL 9004. The matching end panels are light grey RAL 9018 and dark grey RAL 7012 respectively. The case section features internal guide rails for mounting slide-in PCBs, and...

Hindalco Industries, an Aditya Birla Group company, registered a 38 per cent increase in consolidated net profit at Rs 3,397 crore (Rs 2,456 crore) in FY12. It recorded the highest-ever consolidated revenue of Rs 80,821 crore (Rs 72,202 crore), aided by better product mix and rupee depreciation. The increase in profit was primarily attributed to the better performance of its wholly-owned Canadian subsidiary Novelis and copper business in India. Novelis recorded five per cent increase in net sales at $11.1 billion (10.6 billion) in FY’12. The company’s adjusted EBITDA crossed $1 billion. It achieved an EBITDA of $371 a tonne. However, the shipments of aluminium rolled products dropped four per cent to 2,838,000 tonnes (2,969,000 tonnes) in FY12. The dip in shipments was a result of the...

Belden Inc., a global leader in signal transmission solutions for mission-critical applications, announces continuous aluminum armor cladding for its standard or special cable constructions, including instrumentation, control, variable frequency drive (VFD) and industrial communication and networking products. Belden's continuous armor eliminates the need for conduit and is easier to install and re-route, reducing both the physical cost and the labor cost of installation. Impervious to fluid ingress and suitable for installation in harsh and hazardous locations, Belden continuous aluminum armor is MC rated for superior crush resistance. Cable failure in industrial applications can cost thousands of dollars per minute. Plant and facility designers in fields such as oil and gas,...

Hudson Ferry Capital announced that it has made an investment in ALCOM, LLC. ALCOM designs and manufactures specialty aluminum trailers that are sold primarily in the United States and Canada. Hudson Ferry Capital is pleased to announce that it has made an investment in ALCOM, LLC. ALCOM, based in Winslow, Maine, designs and manufactures specialty aluminum trailers that are sold primarily in the United States and Canada. ALCOM was founded in 2005 by Trapper Clark, CEO, and Tom Sturtevant, Vice President, and has grown rapidly to become one of the leading trailer manufacturers in North America. The company produces highly featured aluminum trailers in hundreds of configurations based on customer requests. ALCOM's dealer network includes over 300 dealers. The company's brand names include:...

Alcoa AA 0.00% today announced the first commercial success of its ColorKast(TM) technology in the consumer electronics market. As a result of this innovative technology, Alcoa can produce color anodizable aluminum die cast components with high-end cosmetics. The first use of the ColorKast(TM) technology appears on Samsung's new digital camera NX210 and other consumer electronic OEMs are preparing to apply this technology to their products. ColorKast(TM) is a breakthrough aluminum die casting technology that allows consumer electronics manufacturers to create cosmetically high-end, lightweight, and cost-effective components for portable electronic devices using proprietary alloy, process, and finishing technologies developed at Alcoa Technical Center. The result is cosmetic 3D products...

It may not be the plastics of the 21st century, but aluminum demand is growing along with the need for lighter, more fuel efficient cars, lightweight laptops and tablets like the iPad I’m writing this post on as well as futuristic products such as self-cleaning, smog-eating building panels. Which is, of course, good news for Alcoa, one of the world’s biggest aluminum producers and a century-old, old-school manufacturing giant that, in the public imagination at least, might seem an odd fit in the post-industrial, Internet-age U.S. economy. “We’re all over the automotive sector,” said Kevin Anton, Alcoa’s chief sustainability officer. “Every OEM has called us up and said, ‘What can you guys do for us?’ ” (OEM are original equipment manufacturers, aka, the automakers.) Driving the move to...

Novelis, a producer of rolled aluminium and the largest recycler of aluminium beverage cans, has opened its new Global Research & Technology Center outside of Atlanta, Georgia. The company said that the 160,000 square foot (14,860 square metre) facility serves as the global hub its research and development activities. According to Novelis the center will be the critical focal point for all R&D within the company, focused solutions for the its can, automotive and specialty customers. It is also now the central point for all technical activities worldwide including engineering, manufacturing excellence and metallurgy. Located in Kennesaw, just north of Novelis' world headquarters in Atlanta, the company said that the facility includes a variety of materials development and testing...

Alumisel, a metals recovery company, is in the process of constructing what it calls ‘the biggest and most modern metal recycling plant’ in the Galicia region of Spain. The new $US7M plant, which opens in September, adjoins the company’s existing facilities at O Porrino and will contain some of the most advanced technologies on the market, including an automated metal classification line. According to Alumisel, the new facility will increase the company’s production capacity by 70% and enhance the service it provides through state-of-the-art equipment. Manuel Nogueira, general director of Alumisel, said the new plant represented a strategic investment for the company that will allow it to enter new niche markets and offer ready-to-use products directly to the end user. He said that new...

Applied Rigaku Technologies, Inc. today announced a new empirical method for the analysis of iron in aluminum. Commercial production of aluminum begins with the separation of aluminum oxide from the iron oxide in bauxite, the primary source of aluminum. The alumina, silica and iron content of the ore samples help determine purity and alloy quality, thus playing a significant role in the selection of a bauxite mine site. The concentration of iron is also particularly important during the smelting process to control the grade of the aluminum produced. The levels of iron are therefore closely monitored in the QA/QC process, which requires a simple and fast analysis in order to maintain the optimum product output. The Rigaku NEX QC is designed to be an ideal tool for the non-destructive...

Below are the three companies in the Aluminum industry with the lowest forward price to earnings (P/E) ratios. Forward P/E uses estimated earnings to compare relative value among companies in the same industry. Generally, the lower the forward P/E, the more undervalued a company is believed to be.Alumina ranks lowest with a a forward P/E ratio of 2.65. Noranda Aluminum is next with a a forward P/E ratio of 5.33. Century Aluminum ranks third lowest with a a forward P/E ratio of 7.45. Alcoa follows with a a forward P/E ratio of 8.58, and Kaiser Aluminum rounds out the bottom five with a a forward P/E ratio of 12.18. SmarTrend recommended that its subscribers protect gains by selling shares of Alumina on February 14th, 2012 by issuing a Downtrend alert when the shares were trading at $5.01....

Aluminum prices have fallen to a two-year low on the London Metal Exchange (LME), pressured by a mix of technical and fundamental factors that are weighing on the broader base-metals complex, given growing concerns about the health of the global economy. Traders and brokers said sellers appeared to be taking advantage of any aluminum price rallies to pummel the price lower amid lack of enthusiasm for both aluminum's weak underlying fundamentals as well as macro-economic concerns over the European sovereign-debt crisis and its impact on global economic growth. LME aluminum for delivery in three months on Tuesday hit a low of $US1,839 a metric ton, a level last seen in June 2010. Meanwhile, LME zinc and lead for delivery in three months were similarly lower, dipping to a nine-month low of...

Below are the three companies in the Aluminum industry with the lowest forward earnings yields. Using projected earnings for the current fiscal year, the forward earnings yield is useful to compare a stock's return vs. owning a similar stock or other yield assets (e.g. bonds). Generally, the higher the earnings yield, the more undervalued the stock.Century Aluminum ranks lowest with a forward earnings yield of 1.1%. Following is Alumina with a forward earnings yield of 2.4%. Alcoa ranks third lowest with a forward earnings yield of 6.6%. Kaiser Aluminum follows with a forward earnings yield of 7.2%, and Noranda Aluminum rounds out the bottom five with a forward earnings yield of 12.1%. SmarTrend recommended that its subscribers protect gains by selling shares of Noranda Aluminum on March...

Higher borrowing costs for Spain and Italy have added to worries on the European debt crisis. US home prices rose for a third successive month, but the nation’s consumer confidence and manufacturing data have trailed estimates, weighing on LME aluminum prices. The light metal lost USD 20/mt or 1.07% to settle at USD 1,848/mt, after slipping to a fresh two year low of USD 1,839/mt. Latest LME aluminum stocks were down 1,725 mt at 4,849,975 mt. Aluminum prices should remain weak today as investors await results of the coming EU Summit. LME aluminum is expected to face stronger pressure at USD 1,850/mt and hover between USD 1,828-1,858/mt. The most active SHFE aluminum contract for October delivery should start near RMB 15,070/mt and test support at RMB 15,000/mt. Its trading band is...

It may come as no surprise to anyone tracking the gradual decline of the aluminum price over recent months, but the market remains in pronounced surplus. The World Bureau of Metal Statistics’ January-to-March quarterly report estimates the global market was in surplus by 384,000 tons during the first quarter (Q1), down on an annualized basis from the 1,814,700-ton surplus for the whole of 2011. Part of the reason for the reduction in surplus may well be that net imports of 33,700 tons into China turned the world’s largest consumer from being a net exporter (of some 433,000 tons) last year to a net importer. European demand continues to contract — EU27 demand for January to March being 13.7 percent below the comparable period in 2011, according to the WBMS. If Q1’s global surplus is...

The boom in the construction sector is rippling into the aluminium extrudes market for various applications, giving a huge boost to the aluminium billet market. The growing automotive and industrial sectors in Malaysia, Taiwan, Thailand and Vietnam have expanded the market for aluminium profiles and this superior demand has, in turn, enhanced the production capacities of existing extrusion companies. Strategic Assessment of Aluminium Billets Market in Selected Far East Countries, finds that the current market volume for aluminium billets is 960,545 MT. It is expected to grow to 1,135,656 MT at a compound annual growth rate of 4.4 per cent from 2010 to 2016 in the selected countries of Indonesia, Taiwan, Thailand and Malaysia. "Regional extruders import aluminium billets from China, India...

Total world aluminum inventories in May dropped by 21,000 metric tons to 2.396 million tons, according to figures released Tuesday by the International Aluminum Institute. World stocks in April stood at a revised 2.417 million tons. May stocks were up 966,000 tons compared with the same month of 2011, when inventories were recorded at 1.43 million tons, the IAI said. Unwrought aluminum is aluminum in its basic cast form made from primary metal or from scrap and which is unworked in the metallurgical sense. Total aluminum is unwrought aluminum plus unprocessed scrap, metal in process and finished semi-fabricated (mill) products. Unwrought and total aluminum inventories are all relevant inventories over which primary aluminum producers have some degree of control, with the exception of...

Barring copper utensils and aluminium ingot, ferrous and non-ferrous categories remained flat today on scattered demand from stockists, traders at the Bombay Metals Exchange (BME) said. In ferrous metals, copper utensils rose by Rs 100 per quintal following better demand from stockists, traders said. Other metals including copper heavy, brass utensils and aluminium utensils remained unchanged, traders said. In non-ferrous metals, aluminium ingot increased by Rs 100 per quintal due to lesser stock supply from local dealers. While, copper wire bars, zinc slab, tin slab and nickel cathode remained unaltered, traders added. Ferrous metals (Per quintal in Rupees): Copper Heavy Rs 47,200, Copper Utensils Rs 44,400, Brass Utensils Rs 31,600, Brass Cuttings Rs 32,500 and Aluminium Utensils Rs...