
A beverage can, a pharmaceutical blister pack and a semi-rigid aluminium food tray may all originate from the same broad category of rolled aluminium, but their manufacturing requirements are far from identical. The difference lies in the thickness, alloy composition, surface quality and formability demanded by each application. AL Circle’s material-flow estimates place aluminium slab usage in packaging at approximately 20.64 million tonnes, alongside manufacturing scrap generation of 4.13 million tonnes. The estimated conversion yield is around 78%-82%, indicating that a sizeable proportion of the incoming metal is removed during the production and finishing stages. This distinction matters because packaging demand is not simply a question of how much aluminium leaves a canmaking or...
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Grow with
AL Circle

A second and final Price Monitoring Extension has been activated in this security. The closing auction call period is extended in this security for a further 5 minutes. Following the first price monitoring extension this security would still have executed more than a pre-determined percentage above or below the price of the most recent automated execution today. London Stock Exchange (LSE: LSE.L - news) electronic order book users have a final opportunity to review the prices and sizes of orders entered in this security prior to the auction execution which will set today's closing price.

As part of its CSR activities, National Aluminium Company Limited (Nalco) has provided assistance to the fire victims of Basoi village under Parjang block, in Dhenkanal district. The Periphery Development Cell of Nalco Corporate Office distributed 1000 GCI Sheets worth Rs. 10 lakh, to the 469 affected families yesterday. On behalf of the company, Shri D.N. Nayak, Shri R.K. Behera and P. Acharya coordinated the distribution.

Aluminium Bahrain (Alba) has announced the appointment of Dr Talaat Dafer Abdulla Aldafer Alqahtani - representing Sabic Industrial Investments Company (Sabic) - to its board of directors. Dr Alqahtani's appointment comes following the resignation of Homood Abdulla Al Tuwaijri (who represented Sabic) from the board, said a statement from Alba on Tuesday. Commenting on the new appointment, Alba’s chairman of the board, Mahmood Hashim Al-Kooheji said, "I congratulate Dr Alqahtani on being appointed by Sabic as one of their representatives on the Alba board. He brings with him considerable experience and exposure to regional business dynamics, and we are confident that Alba will benefit richly from his contribution." "We wish him every success and welcome him as a member of Alba’s Board," he...

This report has firstly introduced Activated Alumina definition classification industry chain etc relation information. Then introduced Activated Alumina technology and manufacturing process. And then Summary statistics of Global and China major Activated Alumina 2009-2016 Activated Alumina capacity production supply demand shortage and Manufacturers (global 17 manufacturers China 12 manufacturers) Activated Alumina production Market Share and also introduced Activated Alumina selling price cost profit margin and production value. And then also introduced global and China 17 major Activated Alumina companies basic information, 2009-2016 Activated Alumina capacity production price cost profit margin and production value etc details information. In the end, this report introduced Activated...

Orbite Aluminae, Inc. C3Wednesday struck a tentative deal with India's Nalco that will see the gold and precious metals company test its technology on ore and red mud residue. Nalco, or National Aluminium Company Limited, was established in 1981 as a public sector enterprise of the government of India. It is Asia’s largest integrated aluminium complex, encompassing bauxite mining, alumina refining as well as aluminium smelting, power generation and rail operations. Montreal-based Orbite signed a memorandum of understanding Wednesday to test its technology on Nalco’s ores like: gibbsite, boehmite and also on Nalco’s red mud residue left after refining bauxite to produce alumina. Recent test results illustrated Orbite's process can isolate components found in red mud and remediate them as...

CITA - Bauxite Smelter Plant - Indonesia - Construction Project Profile is a crucial resource for industry executives and anyone looking to access key information about the Bauxite Smelter Plant. CITA - Bauxite Smelter Plant - Indonesia - Construction Project Profile report utilizes a wide range of primary and secondary sources, which are analyzed and presented in a consistent and easily accessible format. WMI strictly follows a standardized research methodology to ensure high levels of data quality and these characteristics guarantee a unique report. Scope This report provides details on the Bauxite Smelter Plant project including: • Project description, overview and location. • Ownership structure, funding status and key funding news for the project. • Information on related projects...

The most active SHFE aluminum contract for October delivery started lower at RMB 15,060/mt and settled down RMB 110/mt or 0.73% at RMB 15,060/mt, rebounding from a new two-year low of RMB 14,925/mt as shorts took profits. Positions added 6,236 lots to 127,344 lots. Transacted contracts broke through 180,000 lots and hit an 8-month high amid strong shorting. The contract is expected to struggle at the RMB 15,000/mt mark in the near term awaiting direction of the EU Summit. Spot aluminum was traded at RMB 15,210-15,280/mt in Shanghai, with low-iron aluminum trading at RMB 15,360-15,380/mt. Spot prices slipped more than RMB 300/mt after the current-month contract lost support at RMB 16,200/mt. The selling interest was strong but buying interest weak, so trading was extremely light....

LME aluminum dipped to a fresh two-year low of USD 1,832.5/mt overnight, and rebounded later amid better-than-expected US durable goods orders and pending home sales, hitting a high of USD 1,879/mt and settling up USD 28/mt or 1.52% at USD 1,876/mt. Latest LME aluminum stocks were down 10,825 mt at 4,839,150 mt. Trading should remain cautious today as investors doubt support from the coming EU Summit. LME aluminum is expected to struggle at the 5-day moving average and move between USD 1,850-1,880/mt. The most active SHFE aluminum contract for October delivery is expected to start higher near RMB 15,300/mt and will remain under the 5-day moving average due to strong resistance there. Its trading band should be RMB 15,100-15,380/mt. The spot market sentiment remains slightly bearish. The...

The Chinese aluminum cash price experienced the biggest price shift of the day, dropping three percent to close near $2,500 per metric ton on June 26, 2012. Chinese aluminum billet prices saw a 0.3 percent decline. The price of Chinese aluminum bar held steady in the $2,200 per metric ton range. The price of Chinese aluminum scrap continues to hover near $2600 per metric ton for the fifth day in a row. The cash price of primary Indian aluminum finished the market day up 0.6 percent per kilogram. On the LME, the primary aluminum cash price declined 0.4 percent to $1,816 per metric ton. On the LME, the aluminum 3-month price fell 0.3 percent to $1,858 per metric ton.

China and the rest of the world (RoW) were in a physical aluminum market deficit in May as global aluminum demand grew 7.7% year-on-year, said Harbor Intelligence in a research note. According to the Harbor Intelligence, under the traditional formula (production plus/minus visible headline inventory movement), global apparent primary aluminum demand grew by a seasonally adjusted monthly rate of 8.4% to an annualized level of 47.1 million tons. Apparent primary aluminum demand grew in both China and the RoW during May, with RoW delivering the bulk of the monthly growth, they added. Overall, global apparent primary demand surpassed global primary output by 2.6 annualized million tons in May. "This apparent global market deficit was composed by a deficit of 1.2 million tons in China and a...

Alcoa Inc. saw its earnings estimates slashed Tuesday by Deutsche Bank Securities, which cited lower aluminum prices and production cuts. The downward revision comes two weeks ahead of the Dow component’s scheduled release of second-quarter results on July 9. Deutsche analyst Jorge Beristain wrote in a research note that he now expects Alcoa (US:AA) to earn of 4 cents a share for the three months ended June 30, down from an earlier estimate of 16 cents. His revised earnings outlook is 4 cents below the FactSet consensus of 8 cents per share. Beristain pinned the move on a quarter-over-quarter drop in aluminum prices to $1.06 per pound, down 5 cents from this time last year. He also said maintenance and repair costs at the company’s smelters would weigh on the bottom line, with some of...

London copper dropped on Wednesday, snapping two straight days of gains, as investors shied away from riskier assets on growing conviction that a European summit this week will fail to resolve the region's intractable debt crisis. But expectations that top copper buyer China could be lured by low prices and start restocking could help check losses. Three-month copper on the London Metal Exchange fell 0.2 percent to $7,344.50 a tonne by 0717 GMT. LME copper has shed about 16 percent from a peak of $8,765 struck in February. The most-active Shanghai October copper contract rose 0.2 percent to 53,740 yuan ($8,400) a tonne, reversing earlier losses, on limited restocking by Chinese consumers at recent low prices. Shanghai copper hit a low of 53,420 yuan a tonne earlier in the session, its...

EMAL has announced the launch of a new added value product in 2012: foundry aluminium which is mainly used in the automotive sector. The addition of foundry to EMAL's portfolio is part of its long term vision of producing more value added products as it develops into one of the world's largest single-site aluminium smelters. Total annual production at the Al Taweelah will rise to 1.3 million metric tonnes once the Phase II expansion is completed in 2014. EMAL President and CEO, Saeed Fadhel Al Mazrooei, said: "As a world-leading company, operating in a global market, it is important that EMAL is flexible to changing demand. The automobile sector is an important and growing segment in the aluminium market , and EMAL is not only well placed to manage this growing demand both in terms of our...

Australia's Bell Bay aluminium smelter reached a new 13-year power supply deal to help secure the long-term future of the 182,000-tonnes-a-year plant in the face of depressed market conditions, miner Rio Tinto said on Thursday. The 57-year-old smelter, located in the island state of Tasmania, is among an estimated $8 billion worth of assets bundled by Rio Tinto into its newly formed Pacific Aluminium division ahead of a possible divestment. Terms of the power contract with the state-owned supplier Hydro Tasmania were not disclosed. Bell Bay general manager Ray Mostogl said in a statement tough market conditions were expected to continue for some time. The price of aluminium is down more than 20 percent this year. Rio Tinto in October signalled a major retreat from its aluminium business,...

InventHelp, America’s largest invention submission company, announces that one of its clients, an inventor from Indiana, has designed an air-powered tool that could flatten aluminum or metal cans. This invention is patented. “Aluminum or Metal Can Smasher” would compact cans so that they would take up less space. The device would provide individuals with a fast and efficient means of crushing cans, eliminating the hassle of manually crushing aluminum or metal cans. The compactor would allow more cans to be stored in a standard-sized recycle bin, which may also promote recycling. Aluminum or Metal Can Smasher would consist of a cylindrical device that could be produced from aluminum, steel and other components. The opening of the device would be equipped with a safety cover. The cover...

Vice President for Environment, Health and Safety Charles Johnson testified before the House of Representative's Energy and Commerce Committee, Subcommittee on Environment and the Economy. The Association's testimony was related to the discussion draft bill entitled "The Increasing Manufacturing Competitiveness through Improved Recycling Act of 2012." The Association's testimony follows: Chairman Shimkus, Ranking Member Green and Members of the Subcommittee on Environment and the Economy: Mr. Chairman, thank you for the opportunity to testify before this committee today. My name is Charles Johnson and I am the Vice President for Environment, Health and Safety at The Aluminum Association. The Aluminum Association is a membership trade association representing U.S. aluminum producers,...

Gulf Extrusions, one of the largest aluminum extrusion plants in the Gulf region, has announced that it has recently been awarded a contract by an institution in Saudi Arabia to supply 800 tons of X-ECO recycled aluminium alloys. The company has become the first extrusions firm in the GCC region to supply alloys made from recycled aluminium, which offer significant benefits such as CO2 reduction of 60 to 80 per cent compared to exploiting primary aluminium, reduction in the overall consumption of energy when used in buildings, far-reaching recycling options, maximum use of recycled aluminium and high grade quality. "In line with our focus on sustainable development, Gulf Extrusions has been committed to contributing to the large-scale reduction in the consumption of raw materials and...

Inner Mongolia Tongliao city has set a goal to become the nation’s aluminium demonstration base. Based on various advantages such as resource, location, transportation and electric power, Tongliao has formed four complete aluminium industrial chains. They are: “Liquid aluminium-refined aluminium-electron aluminium foil-formed foil” “Liquid aluminium-aluminium flat ingot-aluminium foil” “Liquid aluminium-aluminium wheel” Liquid aluminium-aluminium profile” Tongliao city is expanding into high-presion industrial aluminium profile, electronic information products, mechanical equipments, etc. It is also improving its technical level and production ability to increase its industrial competitiveness.