
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Kazakhstan's aluminium exports to the European Union (EU) reached 110,184 tonnes in 2025, generating EUR 274 million in revenue, according to the country's Ministry of Trade and Integration. The EU's share of Kazakhstan's total aluminium exports rose sharply from approximately 6 per cent to 54 per cent, highlighting the growing importance of the European market for the country's aluminium industry. However, the introduction of the European Union's Carbon Border Adjustment Mechanism (CBAM) is bringing new compliance requirements for Kazakh exporters, with carbon accounting, emissions verification and production modernisation emerging as key areas of focus. These challenges were discussed during a session held in Antalya, Türkiye, alongside the 31st Conference of the Parties to the UN...
Grow with
AL Circle

Reuters reported that Standard Bank lowered its outlook for average prices for aluminium, copper and nickel in 2012, while raising the estimate for zinc. The bank cut its 2012 aluminium forecast to USD 2,110 per tonne on average from USD 2,140 per tonne and its 2013 forecast by USD 55 to an average of USD 2,225 per tonne, saying production cuts were yet to emerge in spite of weak prices as higher premiums continue to encourage production capacity to remain on-line.

India's state-run National Aluminium Co (NALCO) said on Thursday it has sold 12,000 tonnes of Aluminium ingots at close to $223 per tonne premium over the average LME cash price on a cost, insurance and freight (CIF) basis. The metal will be shipped to a European buyer in six batches of 2,000 tonnes each from August to January, NALCO's commercial director Ansuman Das told Reuters. NALCO, whose tenders serve as a global benchmark, last sold 8,000 tonnes of Aluminium ingots at about $203 per tonne premium over the average LME cash price on a CIF basis to a European buyer last month.

A dedicated website has been launched to keep people informed about the closure process at Northumberland’s biggest private sector employer. Rio Tinto Alcan (RTA) has created it so that the public and local stakeholders can stay up to date with the lengthy; closure de-commissioning and legacy work at the 512-job Lynemouth Aluminium smelter. The website” www.rtalynemouth. co.uk” will be regularly updated with the news and developments, and also features a Twitter feed, media section and what’s on area. Visitors will find a helpful Q&A section, as well as details of what type of legacy projects the company would like to support. RTA is inviting applications from local groups and organizations for grants towards the cost of projects which will create a lasting legacy and benefits for...

Sesa Goa Limited, a subsidiary of Vedanta group, has written to the state government seeking to lift ban on transportation of iron ore during monsoon, which has resulted in drying up of their raw material required to run two of their plants. In a letter to District Collector (South) N D Agarwal written this week, Sesa Goa said they will have to shut down both the Pig Iron Plant (PIP) and metallurgical coke plant situated in Amona village of Bicholim taluka and lay-off workers as their raw material is drying up. Both the plants require 3,200 tonnes of iron ore daily to run their operation, the company has said, demanding permission to ply 1,000 trucks daily between their mining site at Codli in South Goa and Amona, where the plants are located. The letter has mentioned that total 780...

Union officials say they are in talks with management over redundancies at the Anglesey Aluminium plant. The smelting operation closed at the works at Holyhead in 2009 with the loss of nearly 400 jobs. About 110 staff have continued to work at the site as part of a decommissioning process and its remelt business. The company said talks with staff and unions had began as decommissioning was to be completed by September. A spokeswoman said the job cuts of about up to 40 staff would be from across the business as the company looked to make its remelt business stand alone. John Hamilton from Unite said the situation was expected as decommissioning cam to an end at the plant. He said that more talks were due to be held on Friday with the company, adding that the numbers of jobs affected have...

Except for commercial banks, most businesses in the bauxite mining town of Linden closed their doors and public transportation ground to a halt to mark the beginning of a five-day shutdown against a hike in electricity tariffs. Businesses, including the post office, did not open Wednesday. Privately-owned boats across the Demerara River docked early for the remainder of the day. Minibuses to and from Georgetown and around Linden also was hard to come by as most operators switched off their engines. When they reached the Mackenzie-Wismar Bridge across the Demerara River, several elderly women said they were taking a rest, resulting in the demonstrators remaining there for a considerable length of time. The bridge is a major thoroughfare for passengers and cargo heading into interior mining...

Anglo African Minerals plc, the dedicated bauxite exploration and development company is pleased to announce the terms of a private share placement of 7,590,000 ordinary shares of EUR0.001 for total subscription funds of EUR759, 000. As a consequence of this funding a number of loans associated with shareholders have been converted into ordinary shares on the same terms as the placement. A total amount of EUR1.2 million has been agreed to be converted into ordinary shares. There are now 83,487,899 ordinary shares in issue. In addition, an extensive re-structure of the board and management of the Company has taken place, as follows. With immediate effect, the following directors have been appointed to the board: Roy Pitchford Mr. Pitchford has been appointed chairman of the board. He is...

Queensland Premier Campbell Newman has vowed to overhaul laws to allow Rio Tinto to proceed with its $1.4 billion South of Embley bauxite mine at Cape York. Mr Newman, who also announced a six-month action plan at the Liberal National Party annual convention in Brisbane on Friday, said his government was committed to supporting development of the project, which federal Environment Minister Tony Burke is assessing. Mr Newman said he did not plan to override federal government laws but was determined to streamline the regulation of mining projects in the state. He said he wanted to avoid a repeat of the stand-off over GVK/Hancock Coal's $6.4b Alpha Coal project in Central Queensland. The federal government took over assessment of that project. Following the public spat about the Alpha Coal...

Rio Tinto says jobs will go at a central Queensland mine as the company battles falling coal prices. The mining giant says it is looking at ways to reduce its costs at its Clermont Coal Mine, west of Mackay, to improve competitiveness as the price of thermal coal drops. "A review is underway and although the details are to be worked out, it will unfortunately mean redundancies will be required," a spokesman said in a statement to AAP on Thursday. "We do not take this decision lightly and are committed to keeping our employees informed and providing support to those affected." The spokesman said it was too early to say how many workers would be affected. The mine, opened in 2010, has a workforce of 770 which is shared with the neighbouring Blair Athol mine

The State Committee for Property Affairs of Azerbaijan continues measures aimed at supporting national productions. The Committee reports that its chairman Kerem Hasanov, speaking at the SCPA Collegiate Organ’s meeting, said that the taken measures allowed start of production at facility Ganja Alumina section that ensured 1,200 jobs. “Construction of a plant on production of aluminum semi-products built in Ganja enabled to create another 300 jobs. In general, the complex of aluminum industry created in Ganja provided jobs for 600 people," Hasanov said.

A signing ceremony between the Public Authority for Crafts Industries (PACI), represented by their Deputy Chairman Dr Isam bin Ali al Rawas, and Sohar Aluminium, represented by their CEO Henk Pauw, took place at PACI’s premises in Ghubrah yesterday. The agreement is a Memorandum of Understanding between the two parties whereby PACI will provide the trainer and the study material, while Sohar Aluminium will provide the faculties and funding for the programme. Sohar Aluminium is in the process of developing a training centre at its premises for aluminium craftwork, which will become the country’s first training centre for aluminium crafts. The centre will train selected women from low income families, from within the local community, on manufacturing aluminium crafts. It will be a 2 year...

JSE-listed aluminium products producer Hulamin on Tuesday reported that its headline earnings were expected to be between R54-million and R59-million for the six months ended June 30, compared with R71-million in the corresponding period of 2011. “Operational performance and production volumes were down in the second quarter, as a result of the failure of a motor on the Camps Drift hot line in April,” the company said in a statement. It added that the motor had now been repaired and the line had been operating normally since mid-June. “The resulting insurance claim has not yet been concluded and is not expected to impact the results to June 2012,” Hulamin stated. Meanwhile, it reported that the process of converting the Hulamin pension fund to defined contribution has resulted in an...

Accuride introduced Accu-Armor, the newest aluminum wheel product offering from its Accuride Wheels business unit. Accu-Armor aluminum wheels undergo a proprietary, multi-step, post-production treatment process that texturizes, anodizes and seals the surface without changing or compromising the wheels' original form, fit or function. As a result of this process, Accu-Armor aluminum wheels are highly resistant to scratching and scuffing; filiform corrosion; high- and low-pH chemicals commonly used in truck washes; and common chemicals used in de-icing road surfaces, the company says. Accu-Armor aluminum wheels are also durable under extended exposure to heat and UV light and will not chalk or fade, according to the company. Accuride says they are easy to clean and require very little...

Aleris today announced the establishment of the Commercial & Defense Plate global market segment and a centralized Sustainability initiative, both key strategic areas for the company. Commercial & Defense Plate, a new organization, is the company's fourth global market segment, complementing existing businesses serving Aerospace, Automotive and Heat Exchanger customers. Stephen S. Stone, formerly senior vice president and general manager, Rolled Products North America (RPNA), assumes the new role of vice president, Commercial & Defense Plate. Kelly R. Thomas, formerly vice president and Treasurer, has been named senior vice president and general manager, RPNA, replacing Stone. Eric Rychel, most recently a managing director for Barclays Capital in the Investment Banking Division, has...

Coil GmbH, Germany, awarded SMS Siemag with a contract to deliver an anodizing line for aluminum strips. This new line is the first one of its kind to process aluminum strips having a width of up to 2,000 mm and thicknesses of up to 3.5 mm. With these record dimensions, Coil GmbH is expanding its product and market range. A further highlight of the line is an electrolytic color bath that is being developed by SMS Siemag in cooperation with Coil GmbH. As early as in 2005, SMS Siemag commissioned the first anodizing plant at Coil. The new line, which is designed for an annual capacity of 15,000 t will be erected alongside the old one and go on stream in the middle of 2013. Besides the mechanical and processing equipment, SMS Siemag will provide the electrics equipment. Supervision of...

The strong global demand for aluminium led by the transport sector over the last year reflects the increasing importance of the overall demand for aluminium, reports Qatalum, the organizer of Arab International Aluminium Conference (ARABAL 2012), which will be held at the Grand Hyatt Doha. This demand arrived during increasing change and development in the transport sector, particularly in the automobile, bus, aircraft and ship manufacturing sectors which are increasingly dependent on the use of aluminium qualities in comparison to other necessary metals used in transport industry. Aluminium is a lightweight metal, which enables a decrease in fuel consumption and emissions. Many industries are continuing the trend of replacing traditional metals with aluminium. ARABAL will see a...

Abengoa SA (ABG) will spend $120 million on two steel-dust-waste treatment plants in Turkey and the investment could rise to $300 million if it decides to expand capacity and build an aluminum waste treatment plant. The Spanish engineering company’s Befesa Medio Ambiente SA unit will build the plants in the western and southern industrial provinces of Izmir and Adana, Befesa Chairman Javier Molina Montes said in a news conference in Istanbul today. The factories will each have a steel dust treatment capacity of 110,000 metric tons a year, he said. Befesa has potential to expand its plants, which will start operations in the second half of 2014, Turkey’s Economy Minister Zafer Caglayan said at the conference. Befesa plans to recycle about 45 percent of the steel dust produced in Turkey’s...

The earthquake in Japan in March 2011 will have a significant bearing on the country's metals industry for years to come. In the short term, the disruption halted production at several copper and aluminium refineries. It is also set to hurt demand as the economy has now slipped back into recession. However, we expect demand and supply of metals to pick up as reconstruction efforts continue. Steel and aluminium are the two sectors most likely to benefit as much of Japan's infrastructure around the epicentre of the earthquake has been damaged. Over the long term we expect production and consumption trends to fall back to low single figures, in line with growth forecasts for the Japanese economy as a whole. Japan remains one of the largest producers and consumers of these metals, but faces a...