
The UK could fall short of its legally binding climate targets if the government relaxes requirements for automakers to increase electric vehicle (EV) sales, according to the independent Climate Change Committee (CCC). The proposed change follows reports that ministers are considering reducing the 2030 EV sales target by around a quarter, to approximately 60 per cent, following a consultation on possible revisions to the Zero-Emission Vehicle (ZEV) Mandate. Participate in AL Circle’s upcoming e-Magazine Smart ALuminium: Advancing Industrial Technologies in 2027 to showcase how advanced technologies drive sustainability across the aluminium value chain. Under the current rules, zero-emission vehicles must account for an increasing share of manufacturers' annual car sales, rising from 33...
Kazakhstan's aluminium exports to the European Union (EU) reached 110,184 tonnes in 2025, generating EUR 274 million in revenue, according to the country's Ministry of Trade and Integration. The EU's share of Kazakhstan's total aluminium exports rose sharply from approximately 6 per cent to 54 per cent, highlighting the growing importance of the European market for the country's aluminium industry. However, the introduction of the European Union's Carbon Border Adjustment Mechanism (CBAM) is bringing new compliance requirements for Kazakh exporters, with carbon accounting, emissions verification and production modernisation emerging as key areas of focus. These challenges were discussed during a session held in Antalya, Türkiye, alongside the 31st Conference of the Parties to the UN...
Grow with
AL Circle

Austrian metals group AMAG said solid orders at its casting and rolling divisions should help it report satisfactory second-half results, despite lower aluminium prices that hit earnings in the first half. AMAG said on Friday first-half earnings before interest, tax, depreciation and amortisation fell 12 percent to 72.2 million euros ($87.8 million) as high raw materials costs and the lower aluminium price hit earnings in its metal division. "The price of aluminium being lower in comparison to the prior year puts a burden on the metal division, causing its profit contribution to go down despite full capacity utilisation," it added in its outlook. But a steady performance at the casting and rolling businesses should keep capacity utilisation and earnings there high in the second semester,...

The Virginia Economic Development Partnership announced the acceptance of Neuman Aluminium Impact Extrusion of Waynesboro into its two-year Virginia Leaders in Export Trade program. Launched in January 2002, the VALET program assists exporters in the Commonwealth that have firmly established domestic operations and are committed to international exporting as an expansion strategy. Currently, VALET has 50 companies as participants. New participants in the program have access to $15,000 in reimbursement funds from the Commonwealth. The program provides participating companies assistance from a team of experienced international service providers to help them meet their international goals. Private sector service providers such as attorneys, web designers, bankers, translators and freight...

Bosnia's sole alumina plant, Birac, halted production on Wednesday after the Balkan country's main gas distributor cut supplies to the company over outstanding debts, Birac said in a statement. "Production at the Birac factory was completely halted after all gas reserves had been exhausted," the statement said. The BH Gas distributor cut supplies to the plant on Tuesday. Birac, majority-owned by Lithuania's Ukio Bank Investment Group and based in the eastern town of Zvornik, produces mainly alumina, a key raw material for the production of aluminium, and some quantities of zeolite and hydrates used in the chemical industry. The factory's management said it would hold talks with BH Gas on Thursday to seek a solution for a debt of 22 million Bosnian marka ($13.8 million). Otherwise the...

Outotec and Orbite Aluminae have agreed to terms for a project related to the Canadian company's new plant to process high purity alumina. The scope of delivery for Outotec involves both basic and detail engineering as well as providing fluidized bed technology with special Outotec equipment for decomposing and calcining high purity alumina. Both parties have agreed not to disclose the contract value. Orbite's facility is being built in Cap-Chat, Quebec. The basic raw material in the new process is aluminous clay. High purity alumina is used in a variety of high-end technology applications. Half of the world's annual production of ultra-pure alumina goes into producing synthetic sapphire which is used in fiber optics and, more recently, in LED lighting for home and automotive markets. It...

Bauxite Resources Limited provides the June 2012 Quarterly Activities and Cashflow Reports. The key points of the report are: - JORC Bauxite resources increased by 172% to 139.5Mt - New 73 Mt Felicitas bauxite resource announced - May 2012 - New 15 Mt Ceres bauxite resource announced - July 2012 - Appointment of credentialled executive Bill Moss to head up BAJV - Recruitment underway for successor to current CEO who steps down at end of 2012 - Cash in hand $48.03 million with no bank debt

China’s private mining group Bosai plans to invest $1 billion to build an alumina plant in Indonesia after the Southeast Asian country implemented a series of policies to restrict raw material exports. The company has reached an initial agreement with Indonesian parties to build a 2 million tpy alumina plant on an island with abundant bauxite resources, its general secretary, Zhang Yonghua, was quoted as saying. Based in southwest China city Chongqing, Bosai's products enjoy markets of more than 30 countries and regions in the world and both calcined bauxite and brown fused alumina are proudly ranked No. 1 in the global market. The plant is expected to put into production in 2 years. Currently more than 80% of bauxite supply in China relies on exports from Indonesia. The latter , however...

Miners are dusting off plans to develop Cape York, buoyed by the prospect that Queensland would scrap laws protecting "wild" rivers and boost economic activity across the peninsula. Bauxite miner Cape Alumina is assessing the viability of its $1.2 billion Pisolite Hills project, which was stalled by a 2010 declaration over the Wenlock River. Chinese aluminium giant Chalco also remains keen to develop bauxite deposits near the Aboriginal community of Aurukun, on the far northwest coast of the peninsula. The Australian revealed yesterday that the state Liberal National Party government would develop a Cape York statutory regional plan to map out land-use areas across far north Queensland and encourage economic development. It plans to repeal the controversial wild rivers law brought in by...

Votorantim Metais (VM) is discussing the development of a bauxite project in the northern Brazilian state of Pará, local media reported. The complex will be set up in the city of Rondon, will extract about 7.1 million tpy of bauxite and will include a refinery producing about 3 million tpy of alumina by 2016/2017, according to information from Brazilian newspaper Valor Econômico. Votorantim Metais intends to invest $3.3 billion in the project. The company confirmed its interest in developing a mining project in Pará, but declined to comment on the mentined project.

North Carolina regulators want to hear from neighbors about plans by Alcoa Inc. to cover a lake bottom to prevent a health-harming contaminant near its closed aluminum smelter from moving. The state Division of Waste Management holds a public hearing Thursday in Albemarle about plans for Alcoa to cap PCB-contaminated sediments in two areas of Badin Lake. Environmental groups have criticized the plan for not doing enough to clean the lake of PCBs. Activists want the state environment agency to require clean-up so that the fish are safe to eat. Officials have posted signs warning that catfish and large-mouth bass had elevated PCB levels.

Sterlite Industries (India) Ltd has informed BSE that the Hon''ble High Court of Madras has admitted the Petition filed by the Company in relation to the Scheme of Amalgamation and Arrangement amongst the Company, The Madras Aluminium Company Limited, Sterlite Energy Limited, Vedanta Aluminium Limited and Sesa Goa Limited and their respective Shareholders and Creditors on July 17, 2012. The returnable date fixed by the High Court for the final hearing for approval of the Scheme is August 27, 2012.

The most active SHFE 1211 contract opened lower at RMB 15,385/mt on August 1. The three-month contract failed to regain RMB 15,400/mt as contracted July China manufacturing PMI data triggered short selling. It finally closed at RMB 15,385/mt, down RMB 55/mt or 0.36%. Positions were up 1,022 lots to 95,814 lots. Weak manufacturing data raised market expectations for further loose policies. Markets are eyeing upcoming US Federal Reserve interest rate meeting, waiting for more direction. It remains to be seen whether the three-month SHFE aluminum contract will find support or meet resistance at RMB 15,400/mt. Mainstream traded prices for spot aluminum were at RMB 15,400-15,430/mt in Shanghai on August 1, with discounts at RMB 30-60/mt and low-iron aluminum traded at RMB 15,490-15,510/mt. The...

With in the S&P GSCI Enhanced Commodity Index, industrial metals returned -4.7 per cent through early June 2012. Whilst not exactly exciting, the space at least held up stronger than energy, which was down 11.1 per cent. Widespread deleveraging and a move to net speculative short positioning in response to continued fears in the eurozone have caused some analysts to revise down their short-term forecasts, with Goldman Sachs, for example, reducing its three-month forecast for copper from USD9,000/mt to USD8,000/mt. As the Goldman Sachs team wrote in their Commodity Watch report on 11 June 2012, despite reducing their near-term forecasts their base case is still for solid upside on a three-month basis in aluminium (+11 per cent) and copper (+10 per cent). The house view is even more...

Sterlite Industries India Limited announced the production of Vedanta Aluminium. During Q1, Lanjigarh refinery produced 218,000 tonnes of alumina with bauxite from BALCO and third party purchases. Aluminium production at Jharsuguda was 11% higher at 124,000 tonnes as compared with corresponding prior quarter. The cost of production at VAL in Q1 was INR 100,020 per tonne compared with INR 104,853 per tonne in the corresponding prior quarter lower by 5 % in Rupee terms due to higher production and better operational efficiencies. EBITDA was adversely impacted by INR 100 crore on account of interest differential as per AS 16 and INR 80 crore of mark to market loss on creditors and loans due to foreign exchange fluctuation. EBITDA excluding these items was INR 263 crore. Aluminium premiums...

The only potential suitor for Alcoa's Italian smelter has broken off talks with the government, labour unions said on Wednesday, putting hundreds of jobs at risk. The U.S. aluminium company had planned to close its Portovesme smelter on the island of Sardinia by mid-year as part of efforts to cut global output and costs. Following strong objections from Italian authorities, Alcoa agreed in March to keep the smelter running for a further two months while it looked for buyers. But the only interested party, German hedge fund Aurelius, pulled out of talks with the government after failing to present a viable industrial plan, the FIM CISL metalworkers union said. The government has asked Alcoa to consider further offers and further extend the deadline for shutting the smelter, the union said...

Dubai Aluminium (DUBAL), the state-owned corporation that operates the world's largest single-site smelter using pre-bake anode technology, has again extended a hand of kindness to the less privileged in Dubai. Some 1,800 gift bags were prepared in advance; and then presented on 22 July 2012 to the labourers employed by the 44 contractors and sub-contractors working on DUBAL's Jebel Ali site, thereby demonstrating the Ramadan spirit of purification through charitable deeds. The annual initiative, entitled "Bring-A-Smile", was again fully funded by DUBAL at a cost in excess of dhs142,000. Each labourer received a cooler backpack, which not only served as a handy carry-all for a range of items but will also be useful for keeping food and water cool in the heat of the summer. Having first...

The Arab International Aluminium Conference (Arabal 2012), which be held in Doha 20th - 22nd November 2012, has received sponsorship from Saudi Arabian Mining Company (Maaden), Aluminium Bahrain (Alba), and Sohar Aluminium Company in addition to a number of regional and international aluminium companies, including HATCH, FATA, Kuwait Industries Company Holding, ABB, and WAHL. This collective sponsorship and the increasing interest reflects the importance of Arabal, which is the premier trade event for the Middle East's aluminium industry and the only conference in the world attended by every single primary aluminium manufacturer in the region. Therefore, it is the conference of choice for anyone interested in the Middle East aluminium industry. The total production of aluminium smelters...

Engineering and construction company Fluor Corporation has won contracts worth more than $1 billion for an aluminum plant in Saudi Arabia and a highway project in the US, the company said on Wednesday. The company was awarded a contract from Ma'aden and Alcoa to provide engineering, procurement and construction management services for an automotive sheet facility in Ras Al-Khair, Saudi Arabia. Fluor added $337 million to its backlog of contracted work in the second quarter. The company's scope of work includes designing, constructing and commissioning the plant, which will have the capability to produce a range of products suitable for further downstream manufacturing in the aluminum complex. These products include automotive heat-treated and non-heat-treated sheet, building and...

Norwegian aluminium firm Norsk Hydro has agreed to sell its Portalex extrusion plant in Cacem, Portugal, to Germany's Bavaria Industriekapital AG for an undisclosed sum, the company said on Wednesday. The transaction is expected to close on Aug. 31, Hydro said, adding that the plant, which handles extrusion and product finishing, employs about 170 people. "Portalex, as the company is known in the market, has felt the downturn in the Portuguese market and struggled over the last years," Hydro said.